18 1. PROCEDURE › 1.5. Comments on initiation, Regulation (EU) 2024/1268

In forcesince 6 May 2024

Fourth, all four parties commented on the concept of assembly operations, as set out in Article 13(2) of the basic AD Regulation, and argued that this concept did not apply to the operations in the countries concerned regarding the production of SSCR. According to the parties, the transformation of slabs or stainless steel hot-rolled coils (‘SSHR’) into SSCR are not assembly operations since there are no parts which are assembled, and the resulting transformation is irreversible. In addition, the production of SSCR cannot be seen as a finishing or completion operation as this is something which should take place at the end of the manufacturing process such as polishing, skin pass or slitting. The parties argued that the main stages of SSCR production such as the actual cold-rolling or cold annealing and pickling cannot fall under such a definition. It was also argued that assembly operations are not the same as completion operations, since the latter takes place only after the product has already been assembled. According to Posco Assan and Posco VST, the concept of completion operations is only concerned when calculating the added value under Article 13(2)(b) of the basic AD Regulation, and can therefore not be considered a ‘practice, process or work’ as intended by Article 23(3) of the basic AS Regulation.