Third, Gerber claimed that the finding both in the request and in the investigation that the value added during the processing of SSCR is less than 10 % is wrong, and that the Commission failed to provide evidence of such finding. However, it should be noted that the threshold laid down in Article 13(2)(b) of the basic AD Regulation is an added value of 25 %, not 10 %. In its analysis, the Commission used the data provided by the individual cooperating companies, which was verified on spot. For most of these companies, the added value did not rise above 10 %, and it remained far below 25 % for all of them. Contrary to Gerber’s claims, this finding was not the result of leaving out processing or finishing stages such as annealing, or excluding certain types of stainless steel (Gerber mentioned 200 and 400 series steel), ‘other numerical tricks’ or even ‘fraud’. The Commission calculated the value added to the parts as required by Article 13(2)(b) of the basic AD Regulation by expressing the ‘value added to the parts brought in’ (in this case manufacturing cost other than the material cost) as a percentage of the overall manufacturing cost. None of the cooperating companies, which provided the data, contested this methodology nor the Commission’s findings with regard to the added value based on the companies’ data.
39 1. PROCEDURE › 1.5. Comments on initiation, Regulation (EU) 2024/1267
In forcesince 6 May 2024