ANNEX V APPLICATION OF TEST REQUIREMENTS AND DECLARATIONS, Regulation (EU) 2024/1257

In forcesince 24 Apr 2024

[The approval authority may require a test to be performed.]

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Gaseous pollutants and PN in road testing (RDE) | Required demonstration test for all fuels for which the type-approval is granted and declaration of compliance for all fuels, all payloads and all applicable vehicle types | Not required | Optional

Gaseous pollutants, PM, PN, CO2 emissions, fuel consumption (OBFCM), electric energy consumption and electric range (battery durability) (WLTP at 23 oC) | Required test for all fuels for which the type-approval is granted | Required for exhaust emissions and OBFCM | Required for exhaust emissions, OBFCM and SOH monitors of battery durability

CO2 ambient temperature correction

(WLTP at 14 oC)

Declaration | Not required | Optional

Crankcase emissions | Declaration that a closed crankcase system or routing to the tailpipe is installed | Required | Optional

Evaporative emissions test | Required | Required | Optional

Durability of emission control systems | Declaration | Not required | Not required

Correct operation of systems using a consumable reagent and pollution control systems | Declaration | Not required | Optional

Battery durability | Declaration | Not required | Required

Laboratory test of low temperature for emissions | Required | Not required | Optional

Laboratory test of low temperature for electric range | Required | Not required | Optional

On-board diagnostics | Declaration | Not required | Optional

On-board monitoring | Declaration and demonstration | Not required | Required

Power determination | Required | Not required | Optional

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required | Not required

Geofencing technologies (where applicable) | Declaration and demonstration | Not required | Not required

[The approval authority may require a test to be performed.]

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Relevant actor | Granting type-approval authority | Granting type-approval authority | Granting type-approval authority | Commission and recognised third parties | Market surveillance authorities | Commission and recognised third parties

Gaseous pollutants and PN in road testing (RDE) | Required demonstration test for all fuels for which the type-approval is granted and declaration of compliance for all fuels, all payloads and all applicable vehicle types | Not required | Required | Optional | Required | Optional

Gaseous pollutants, PM, PN, CO2 emissions, fuel consumption (OBFCM), electric energy consumption and electric range (battery durability) (WLTP at 23 oC) | Required test for all fuels for which the type- approval is granted | Audits or optional testing | Required | Optional | Optional | Optional

CO2 ambient temperature correction (WLTP at 14 oC) | Declaration | Not required | Optional | Optional | Required | Optional

Crankcase emissions | Declaration that a closed crankcase system or routing to the tailpipe is installed | Audits or optional testing | Optional | Optional | Optional | Optional

Evaporative emissions test | Required | Audits or optional testing | Optional | Optional | Required | Optional

Durability of emission control systems | Declaration | Not required | Required | Optional | Required | Optional

Operation of systems using a consumable reagent and pollution control systems | Not required | Not required | Required | Optional | Required | Optional

Battery durability | Declaration | Not required | Required | Optional | Required | Optional

Laboratory test of low temperature for emissions | Required | Not required | Optional | Optional | Required | Optional

Laboratory test of low temperature for electric range | Required | Not required | Optional | Optional | Required | Optional

On-board diagnostics | Declaration | Not required | Optional | Optional | Required | Optional

On-board monitoring | Declaration and demonstration | Not required | Required | Optional | Required | Optional

Power determination | Required | Not required | Optional | Optional | Optional | Optional

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required | Not required | Not required | Required | Optional

Geofencing technologies (where applicable) | Declaration and demonstration | Not required | Not required | Not required | Required | Optional

[Supported by data of engine testing of all power ratings.] [In the case of a vehicle with an emission type-approved engine system, the engine manufacturer is responsible for demonstrating compliance of the vehicle in this test (the engine is type-approved as a separate technical unit).] [In the case of a vehicle with an emission type-approved engine system, the engine manufacturer is responsible for demonstrating compliance of the vehicle in this test when agreed with the vehicle manufacturer in accordance with Article 9.]

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Gaseous pollutants, PM, PN and CO2 emissions, fuel consumption (WHTC and WHSC) | Required on the parent engine of the emission family and declaration for all family members; | Required on an engine out of the family | Not required

Gaseous pollutants, PN in road testing (RDE) for each fuel and for the applicable vehicle categories (M2, M3, N2 and N3) | Required demonstration tests for all fuels for which the type-approval is granted per vehicle type and a declaration of compliance for all fuels, all payloads and all applicable vehicle categories | Not required | Required test on a vehicle with any fuel and on any vehicle category and any payload for all engine types every two years

CO2,emissions, fuel and electric energy consumption, zero-emissions and electric range determination of a vehicle | Licence to operate the VECTO simulation tool, components certification. | For components. VECTO usage check (four times a year) | Required

Verification testing procedure | Not required | Required | Not required

Crankcase emissions | Check installation of closed crankcase system or routing to the tailpipe | Not required | Optional

Durability of emission control systems | Declaration | Not required | Not required

Operation of systems using a consumable reagent and pollution control systems | Declaration | Not required | Optional

Battery durability | Declaration | Not required | Required

Power determination | Required | Not required | Not required

On-board diagnostics (OBD family level) | Declaration | Not required | Optional

On-board monitoring (OBM family level) | Declaration and demonstration | Not required | Required

OBFCM (on-board measurement of fuel and electric energy consumption, as well as payload) | Required | Required | Required

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required | Not required

Geofencing technologies (where applicable) | Declaration and demonstration | Not required | Not required

[Supported by data of engine testing of all power ratings.] [In the case of a vehicle with an emission type-approved engine system, the engine manufacturer is responsible for demonstrating compliance of the vehicle in this test (the engine is type-approved as a separate technical unit).] [In the case of a vehicle with an emissions type-approved engine system, the engine manufacturer is responsible for demonstrating compliance of the vehicle in this test when agreed with the vehicle manufacturer in accordance with Article 9.]

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Relevant actor | Granting type- approval authority | Granting type-approval authority | Granting type-approval authority | Commission and recognised third parties | Market surveillance authorities | Commission and recognised third parties

Gaseous pollutants and PN in road testing (RDE) for each fuel and for the applicable vehicle categories (M2, M3, N2 and N3) | Required demonstration tests for all fuels for which the type-approval is granted per vehicle type and a declaration of compliance for all fuels, all payloads and all applicable vehicle categories | (See engine requirements) | Required yearly for an adequate number of vehicle types on any fuel and on any vehicle category covered by the emission type-approval | Optional | Required/Optional | Optional

Gaseous pollutants, PM, PN and CO2 emissions, fuel consumption (WHTC and WHSC) | Required on the parent engine of the engine family and declaration for all family members; | Required on an engine of the engine family | Not required | Not required | Not required | Not required

CO2 emissions, fuel and electric energy consumption, zero-emissions and electric range determination of a vehicle | Issue licence to operate the VECTO simulation tool; issue component certificates | For components | Not required | Not required | Optional | Optional

Verification testing procedure | Not required | Required | Optional | Optional | Optional | Optional

Crankcase emissions | Check installation of closed crankcase system or routing to the tailpipe | Not required | Optional | Optional | Optional | Optional

Durability of emission control systems | Declaration | Not required | Optional | Optional | Required | Optional

Operation of systems using a consumable reagent and pollution control systems | Not required | Not required | Required | Optional | Required | Optional

Battery durability | Declaration | Not required | Required | Optional | Optional | Optional

Power determination | Required | Not required | Optional | Optional | Optional | Optional

On-board diagnostics (OBD family level) | Declaration | Not required | Optional | Optional | Required | Optional

On-board monitoring (OBM family level) | Declaration and demonstration | Not required | Required | Not required | Required | Optional

OBFCM (on-board measurement of fuel and electric energy consumption, as well as payload) | Required | Required | Required | Optional | Optional | Optional

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required | Not required | Not required | Required | Optional

Geofencing technologies (where applicable) | Declaration and demonstration | Not required | Not required | Not required | Required | Optional

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Energy efficiency of trailers | Issue licence to operate the VECTO simulation tool; issue component certificates | For components | Optional

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Energy efficiency of trailers | Issue licence to operate the VECTO simulation tool; issue component certificates | For components | Not required | Not required | Optional | Optional

[Only if the engine manufacturer provides those systems together with the engine.] [Supported by data of engine testing of all power ratings.]

Test requirements for each fuel | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Gaseous pollutants, PM, PN and CO2 emissions and fuel consumption (WHTC and WHSC) | Required on the parent engine of the engine family and declaration for all family members | Required on an engine of the engine family | Performed only with the complete vehicle as in Tables 3 and 4

Gaseous pollutants, PN in road testing (RDE) for each type of fuel and for the applicable vehicle categories (M2, M3, N2 and N3) | Required demonstration tests for all fuels for which the type-approval is granted per vehicle type and a declaration of compliance for all fuels, all payloads and all applicable vehicle categories | Not required

Engine tests for verifying data required for CO2 emissions determination | Required | Required

Continuous/periodic regeneration | Declaration | Not required

Crankcase emissions | Check installation of closed crankcase system or routing to the tailpipe | Not required

Durability of emission control systems | Declaration | Not required

Power determination | Required | Not required

On-board diagnostics (OBD family level) | Declaration | Not required

On-board monitoring (OBM family level) | Performed only with the complete vehicle as in Tables 3 and 4 | Not required

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required

[Only if the engine manufacturer provides those systems together with the engine.] [Supported by data of engine testing of all power ratings.]

Test requirements for each fuel | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Relevant actor | Granting type-approval authority | Granting type-approval authority | — | —

Gaseous pollutants, PM, PN and CO2 emissions and fuel consumption (WHTC and WHSC) | Required on the parent engine and a declaration for all engine family members | Audit or optional testing | Performed only with the complete vehicle as in Tables 3 and 4 | Performed only with the complete vehicle as in Tables 3 and 4

Gaseous pollutants, PN in road testing (RDE) for each type of fuel and for the applicable vehicle categories (M2, M3, N2 and N3) | Required demonstration tests for all fuels for which the type-approval is granted per vehicle type and a declaration of compliance for all fuels, all payloads and all applicable vehicle categories | Not required

Engine tests for verifying data required for CO2 determination | Required | Required

Continuous/periodic regeneration | Declaration | Not required

Crankcase emissions | Check installation of closed crankcase system or routing to the tailpipe | Not required

Durability of emission control systems | Declaration | Not required

Power determination | Required | Not required

On-board diagnostics (OBD family level) | Declaration | Not required

On-board monitoring (OBM family level) | Performed only with the complete vehicle as in Tables 3 and 4

Engine power | Required | Not required

Anti-tampering, security and cybersecurity | Declaration and documentation | Not required | |

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Demonstration of performance and durability with aged parts | Required/Declaration | Not required | Optional

Durability requirement check in real world (RDE test with aged vehicles) | Declaration | Not required | Optional

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Relevant actor | Granting type-approval authority | Granting type-approval authority | Granting type-approval authority | Commission and recognised third parties | Market surveillance authorities | Commission and recognised third parties

Demonstration of performance and durability with aged parts | Required | Optional | Optional | Optional | Optional | Optional

Durability requirement check in real world (RDE test with aged vehicles) | Declaration | Not required | Optional | Optional | Required | Optional

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity

Brake system emissions test in WLTP brake cycle | Required | Required | Not required

Test requirements | Tests and requirements for emission type-approval | Tests at conformity of production | Tests at in-service conformity | Tests at market surveillance

Relevant actor | Granting type-approval authority | Granting type-approval authority | Granting type-approval authority | Commission and recognised third parties | Market surveillance authorities | Commission and recognised third parties

Brake system emissions test in WLTP brake cycle | Required | Audit or optional testing | Not required | Optional for verifying the share of friction braking | Optional for verifying the share of friction braking | Optional for verifying the share of friction braking