Within the approval class(es) and rating(s) established by the competent authority, the scope of work specified in the organisation manual defines the exact limits of the approval. It is therefore essential that the approval class(es) and rating(s) and the organisation’s scope of work match.
An UAS rating, in relation to UA or CMU maintenance privileges, means that the Part-CAO.UAS organisation may, in accordance with the scope of work specified in the organisation manual, perform maintenance on the UA, the CMU, or both. Such organisation may also perform maintenance on components (including engines) in accordance with UA or CMU maintenance data or, if agreed by the competent authority, in accordance with component maintenance data, only while such components are fitted to the UA or the CMU. Nevertheless, such organisation may temporarily remove a component for maintenance in order to improve access to that component except when its removal generates the need for additional maintenance that the organisation is not approved to perform. Such removal of a component for maintenance by a UAS-rated maintenance organisation shall be subject to a control procedure specified in the organisation manual.
Under an UAS rating, the Part-CAO.UAS organisation may also be approved, in accordance with the scope of work specified in the organisation manual, to install CMUs, to manage UAS continuing airworthiness, to perform airworthiness reviews, and to issue permits to fly.
A complete engine rating (turbine, piston, electrical, or other) means that the Part-CAO.UAS organisation may perform maintenance on an uninstalled engine and engine components in accordance with engine maintenance data or, if agreed by the competent authority, in accordance with component maintenance data, only while such components are fitted to the engine. Nevertheless, such engine-rated organisation may temporarily remove a component for maintenance in order to improve access to that component except when its removal generates the need for additional maintenance that the organisation is not approved to perform. An engine-rated organisation may also perform maintenance on an installed engine during UA maintenance subject to a control procedure specified in the organisation manual to be approved by the competent authority.
A component other than complete engines rating means that the Part-CAO.UAS organisation may perform maintenance on uninstalled components (excluding complete engines) intended for fitment to the UA, the engine or the CMU. That organisation may also perform maintenance on an installed component (other than complete engines) during UA maintenance, CMU maintenance or at an engine maintenance facility subject to a control procedure specified in the organisation manual to be approved by the competent authority.
A non-destructive testing (NDT) rating is a self-contained rating not necessarily related to a specific UA, engine, or other component. The NDT rating is only necessary for a Part-CAO.UAS organisation that performs NDT as a particular task for another organisation. A Part-CAO.UAS organisation approved with an UAS, engine or component rating may perform NDT on products and components it maintains subject to the organisation manual containing NDT procedures, without the need to hold an NDT rating.
[Or ‘EASA’, if EASA is the competent authority.] [Delete for non-EU Member States or EASA.]
EASA Form 3-CAO.UAS – Issue 1
Page 1 of 2
[MEMBER STATE]
A Member of the European Union
CAO.UAS CERTIFICATE
Reference: [MEMBER STATE CODE].CAO.UAS.[XXXX]
Pursuant to Regulation (EU) 2018/1139 of the European Parliament and of the Council of 4 July 2018 on common rules in the field of civil aviation and establishing a European Union Aviation Safety Agency, and to Commission Implementing Regulation (EU) 2024/1109 and Commission Delegated Regulation 2024/1107, and subject to the conditions specified below, the [COMPETENT AUTHORITY OF THE MEMBER STATE] hereby certifies:
[NAME OF APPROVED ORGANISATION AND ADDRESS]
as a Part-CAO.UAS organisation in compliance with Annex II (Part-CAO.UAS) to Commission Delegated Regulation (EU) 2024/1107
CONDITIONS:
This approval is limited to what is specified in the attached terms of approval and in the ‘Scope of work’ section of the organisation manual referred to in Annex II (Part-CAO.UAS) to Commission Delegated Regulation 2024/1107;
This approval requires compliance with the procedures specified in the organisation manual;
This approval is valid whilst the approved Part-CAO.UAS organisation remains in compliance with Annex II (Part-CAO.UAS) to Commission Delegated Regulation (EU) 2024/1107;
When the approved Part-CAO.UAS organisation subcontracts the provision of services to one or several organisations, this approval remains valid subject to such organisation(s) fulfilling the applicable contractual obligations;
Subject to compliance with the foregoing conditions, this approval shall remain valid for an unlimited duration unless the approval has previously been surrendered, superseded, suspended or revoked.
Date of original issue of the approval certificate: …
Date of this revision of the approval certificate: …
Revision No: …
Signed: …
For the competent authority: [COMPETENT AUTHORITY OF THE MEMBER STATE]
[Or ‘EASA’, if EASA is the competent authority.] [Delete as appropriate if the organisation is not approved.] [Select as appropriate.]
EASA Form 3-CAO.UAS – Issue 1
Page 2 of 2
PART-CAO.UAS ORGANISATION
TERMS OF APPROVAL
Reference: [MEMBER STATE CODE].CAO.UAS.XXXX
Organisation: [NAME OF APPROVED ORGANISATION AND ADDRESS]
CLASS | RATING | PRIVILEGES |
UAS | UAS |
□ UA maintenance
□ CMU maintenance
□ CMU installation
□ Continuing airworthiness management
□ Airworthiness review
□ Permit to fly
COMPONENTS | Complete engine |
□ Maintenance
Components other than complete engines
SPECIALISED SERVICES | Non-destructive testing (NDT) |
□ NDT
List of subcontracted organisation(s) that perform continuing airworthiness tasks |
These terms of approval are limited to the UAS, the UAS components, and the activities specified in the ‘Scope of work’ section of the organisation manual.
Organisation manual reference: …
Date of original issue of the organisation manual: …
Date of last approved revision: … Revision No: …
Signed: …
For the competent authority: [COMPETENT AUTHORITY OF THE MEMBER STATE]