For the purposes of this Regulation, the following definitions shall apply:
‘local space heater’ means a device equipped with one or more heat generators to convert electricity from the mains or gaseous or liquid fuels directly into heat output to provide thermal comfort for human beings in the enclosed space in which it is situated by direct heat transfer, possibly combined with heat output to other spaces or with heat transfer to a fluid;
‘domestic local space heater’ means a local space heater other than a commercial local space heater;
‘nominal heat output’ (Pnom) means the heat output of a local space heater comprising both direct heat output and indirect heat output (where applicable), when operating at the setting for the maximum heat output that can be maintained over an extended period, as declared by the manufacturer, expressed in kW;
‘commercial local space heater’ means either a luminous local space heater or a tube local space heater;
‘luminous local space heater’ means a gaseous fuel local space heater or a liquid fuel local space heater equipped with a burner, to be installed above head level directed towards the place of use so that the heat emitted by the burner, being predominantly infrared radiation, directly warms the people to be heated, being the products of combustion evacuated in the space where the heater is placed;
‘tube local space heater’ means a gaseous fuel or liquid fuel local space heater equipped with a burner, to be installed above head level near the people to be heated, that heats the space primarily by infrared radiation from the tube(s) or strip(s) heated by the internal passage of products of combustion, being the products of combustion evacuated through a flue duct;
‘tube segment’ means a part of a tube local space heater that comprises all the elements needed for stand-alone operation and can therefore be tested independently of the other tube heating system parts;
‘tube segment heat output’ means the heat output of a tube segment which together with other tube segments forms part of a configuration of a tube heater system, expressed in kW;
‘tube heater system’ means a tube local space heater comprising more than one single tube segment, of which the products of combustion of one tube segment may feed into the next tube segment, and of which the products of combustion of multiple tube segments are to be evacuated by a single exhaust fan;
‘direct heat output’ means the heat output of the product by radiation and convection of heat, as emitted by or from the product itself to air, excluding the heat output of the product to a heat transfer fluid, expressed in kW;
‘indirect heat output’ means the heat output of the product to a heat transfer fluid by the same heat generation process that provides the direct heat output of the product, expressed in kW;
‘air heating product’ means an air heating product as defined in Article 2, point (1), of Commission Regulation (EU) 2016/2281 [Commission Regulation (EU) 2016/2281 of 30 November 2016 implementing Directive 2009/125/EC of the European Parliament and of the Council establishing a framework for the setting of ecodesign requirements for energy-related products, with regard to ecodesign requirements for air heating products, cooling products, high temperature process chillers and fan coil units (OJ L 346, 20.12.2016, p. 1).];
‘sauna stove’ means a space heating product, designed, tested, marketed and declared exclusively to be used in, dry or wet sauna’s or similar environments;
‘cooking appliance’ means an appliance or part of it that incorporates one or more cavities using electricity, gas or both, to prepare food by means of a conventional or fan-forced mode;
‘gaseous fuel local space heater’ means a local space heater using gaseous fuel;
‘liquid fuel local space heater’ means a local space heater using liquid fuel;
‘equivalent model’ means a model placed on the market with the same technical parameters set out in Annex II, Table 1, Table 2, Table 3, Table 4, Table 5 or Table 6 as another model placed on the market by the same manufacturer;
‘control’ means the equipment that provides one or more control functions and that interfaces with the end-user to regulate the heat output of a local space heater in scope of this Regulation;
‘control function’ means each of the different control functions according to Table 10 and Table 11 of Annex III for the control of a local space heater;
‘separate related control’ means a control intended to be used with local space heaters in scope of this Regulation but placed on the market separately;
‘declared values’ means the values provided by the manufacturer, importer or authorised representative for the stated, calculated or measured technical parameters in accordance with Article 4, for the verification of compliance by the Member State authorities;
‘model identifier’ means the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark or the same manufacturer’s, importer’s or authorised representative’s name.