1.
The form of mark and label:
2.
If the mark and label are reduced or enlarged, the proportions given in point 1 shall be respected.
3.
Where physically present, the mark and label shall be at least 5 mm high.
The form of mark and label:
If the mark and label are reduced or enlarged, the proportions given in point 1 shall be respected.
Where physically present, the mark and label shall be at least 5 mm high.
Regulation (EU) 2025/2462Lawamends
2. If the mark and label are reduced or enlarged, the proportions given in the drawing above point 1 shall be respected.