Measurements at all monitoring supersites at urban background locations and rural background locations shall include the pollutants listed in Tables 1 and 2, respectively.
[Benzo(a)pyrene and the other polycyclic aromatic hydrocarbons referred to in Article 9(8).] [Where the siting of a monitoring supersite at an urban background location does not allow for the guidelines and criteria of EMEP to apply in accordance with Point C, point (f), of Annex IV, the corresponding deposition measurement may be performed at a separate urban background location within the area of representativeness.]
Pollutant | Type of measurement
PM10, PM2,5, UFP, BC | Fixed measurements
NO2, O3 | Fixed measurements
SO2, CO | Fixed or indicative measurements
Size distribution of UFP | Fixed or indicative measurements
Benzo(a)pyrene, other polycyclic aromatic hydrocarbons (PAH) as relevant | Fixed or indicative measurements
Total deposition of benzo(a)pyrene, and other polycyclic aromatic hydrocarbons (PAH) as relevant | Fixed or indicative measurements
Arsenic, cadmium, lead and nickel | Fixed or indicative measurements
Total deposition of arsenic, cadmium, lead, nickel and mercury | Fixed or indicative measurements
Benzene | Fixed or indicative measurements
Chemical composition of PM2,5 in accordance with Section 2 | Fixed or indicative measurements
[Benzo(a)pyrene and the other polycyclic aromatic hydrocarbons referred to in Article 9(8).]
Pollutant | Type of measurement
PM10, PM2,5, UFP, BC | Fixed measurements
NO2, O3 and ammonia | Fixed measurements
SO2, CO | Fixed or indicative measurements
Total deposition of benzo(a)pyrene and other polycyclic aromatic hydrocarbons (PAH) as relevant | Fixed or indicative measurements
Total deposition of arsenic, cadmium, lead, nickel and mercury | Fixed or indicative measurements
Benzo(a)pyrene, other polycyclic aromatic hydrocarbons (PAH) as relevant | Fixed or indicative measurements
Arsenic, cadmium, lead and nickel | Fixed or indicative measurements
Chemical composition of PM2,5 in accordance with Section 2 | Fixed or indicative measurements
Total gaseous mercury | Fixed or indicative measurements
Pollutant | Type of measurement
Size distribution of UFP | Fixed or indicative measurements
Particulate matter oxidative potential | Fixed or indicative measurements
Ammonia | Fixed or indicative measurements
Levoglucosan to be measured as part of the chemical composition of PM2,5 | Fixed or indicative measurements
Total gaseous mercury | Fixed or indicative measurements
Particulate and gaseous divalent mercury | Fixed or indicative measurements
Nitric acid | Fixed or indicative measurements
The main objectives of such measurements are to ensure that adequate information is made available on levels in urban background locations and rural background locations. That information is essential to judge the enhanced levels in more polluted areas (such as urban background locations, air pollution hotspots, industry related locations or traffic related locations), assess the possible contribution from long-range transport of pollutants, support source apportionment analysis and for the understanding of specific pollutants such as particulate matter. It is also essential for the increased use of modelling applications also in urban areas.
Measurement of PM2,5 shall include at least the total mass concentration and concentrations of appropriate compounds to characterise its chemical composition. At least the list of chemical species given below shall be included.
SO42– | Na+ | NH4+ | Ca2+ | elemental carbon (EC)
NO3– | K+ | Cl– | Mg2+ | organic carbon (OC)
Measurements shall be taken in urban background locations and rural background locations in accordance with Annex IV.
The main objectives of measurements of ozone precursor substances are to analyse any trend in ozone precursors, to check the efficiency of emission reduction strategies, to check the consistency of emission inventories, to support the understanding of ozone formation and precursor dispersion processes, as well as the application of photochemical models, and to help attribute emission sources to observed pollution concentrations.
Measurement of ozone precursor substances shall include at least nitrogen oxides (NO and NO2), and, as appropriate, methane (CH4) and volatile organic compounds (VOC). The selection of the specific compounds to be measured shall depend on the objective sought and may be complemented by other compounds of interest. Member States may use the method which they consider suitable for the objective sought. The reference method as specified under Annex VI applies for nitrogen dioxide and oxides of nitrogen.
A list of VOC recommended for measurement is given below:
Chemical family | Substance
Trivial name | IUPAC name | Formula | CAS number
Alcohols | Methanol | Methanol | CH4O | 67-56-1
Ethanol | Ethanol | C2H6O | 64-17-5
Aldehyde | Formaldehyde | Methanal | CH2O | 50-00-0
Acetaldehyde | Ethanal | C2H4O | 75-07-0
Methacrolein | 2-Methylprop-2-enal | C4H6O | 78-85-3
Alkynes | Acetylene | Ethyne | C2H2 | 74-86-2
Alkanes | Ethane | Ethane | C2H6 | 74-84-0
Propane | Propane | C3H8 | 74-98-6
n-Butane | Butane | C4H10 | 106-97-8
i-Butane | 2-Methylpropane | C4H10 | 75-28-5
n-Pentane | Pentane | C5H12 | 109-66-0
i-Pentane | 2-Methylbutane | C5H12 | 78-78-4
n-Hexane | Hexane | C6H14 | 110-54-3
i-Hexane | 2-Methylpentane | C6H14 | 107-83-5
n-Heptane | Heptane | C7H16 | 142-82-5
n-Octane | Octane | C8H18 | 111-65-9
i-Octane | 2,2,4-Trimethylpentane | C8H18 | 540-84-1
Alkenes | Ethylene | Ethene | C2H4 | 75-21-8
Propene / Propylene | Propene | C3H6 | 115-07-1
1,3-Butadiene | Buta-1,3-diene | C4H6 | 106-99-0
1-Butene | But-1-ene | C4H8 | 106-98-9
Trans-2-Butene | (E)-but-2-ene | C4H8 | 624-64-6
cis-2-Butene | (Z)-but-2-ene | C4H8 | 590-18-1
1-Pentene | Pent-1-ene | C5H10 | 109-67-1
2-Pentene | (Z)-Pent-2-ene | C5H10 | 627-20-3 (cis-2 pentene)
(E)-Pent-2-ene | 646-04-8 (trans-2 pentene)
Aromatic hydrocarbons | Benzene | Benzene | C6H6 | 71-43-2
Toluene / Methylbenzene | Toluene | C7H8 | 108-88-3
Ethyl benzene | Ethylbenzene | C8H10 | 100-41-4
m + p-Xylene | 1,3-Dimethylbenzene (m-Xylene) | C8H10 | 108-38-3 (m-Xylene)
1,4-Dimethylbenzene (p-Xylene) | 106-42-3 (p-Xylene)
o-Xylene | 1,2-Dimethylbenzene (o-Xylene) | C8H10 | 95-47-6
1,2,4-Trimethylebenzene | 1,2,4-Trimethylbenzene | C9H12 | 95-63-6
1,2,3-Trimethylebenzene | 1,2,3-Trimethylbenzene | C9H12 | 526-73-8
1,3,5-Trimethylebenzene | 1,3,5-Trimethylebenzene | C9H12 | 108-67-8
Ketones | Acetone | Propan-2-one | C3H6O | 67-64-1
Methyl ethyl ketone | Butan-2-one | C4H8O | 78-93-3
Methyl vinyl ketone | 3-Buten-2-one | C4H6O | 78-94-4
Terpenes | Isoprene | 2-Methylbut-1,3-diene | C5H8 | 78-79-5
p-Cymene | 1-Methyl-4-(1-methylethyl)benzene | C10H14 | 99-87-6
Limonene | 1-methyl-4-(1-methylethenyl)-cyclohexene | C10H16 | 138-86-3
β-Myrcene | 7-Methyl-3-methylene-1,6-octadiene | C10H16 | 123-35-3
α-Pinene | 2,6,6-Trimethyl-bicyclo[3.1.1]hept-2-ene | C10H16 | 80-56-8
β-Pinene | 6,6-Dimethyl-2-methyl-enebicyclo[3.1.1]heptane | C10H16 | 127-91-3
Camphene | 2,2-dimethyl-3-methyl-enebicyclo[2.2.1]heptane | C10H16 | 79-92-5
Δ3-Carene | 3,7,7-Trimethyl-bicyclo[4.1.0]hept-3-ene | C10H16 | 13466-78-9
1,8-Cineol | 1,3,3 trimethyl 2 oxabicyclo[2,2,2]octane | C10H18O | 470-82-6
Measurements shall be taken at sampling points set up in accordance with the requirements of this Directive and considered appropriate with regards to the monitoring objectives referred to in Point A of this Section.
The objective of such measurements is to ensure that adequate information is available at locations where high concentrations of UFP occur that are mainly influenced by sources from air, water or road transport (such as airports, ports or roads), industrial sites or domestic heating. The information shall be appropriate to judge on enhanced levels of UFP concentrations from those sources.
UFP.
Sampling points shall be established in accordance with Annexes IV and V at a location where high UFP concentrations are likely to occur and downwind of the main sources within the relevant predominant wind direction of those sources.