On its front page, the energy performance certificate shall display at least the following elements:
the energy performance class;
the calculated annual primary energy use in kWh/(m2.y);
the calculated annual final energy use in kWh/(m2.y);
renewable energy produced on-site in % of energy use;
operational greenhouse gas emissions (kgCO2/(m2.y)), and the value of the life-cycle GWP, if available.
The energy performance certificate shall also display the following elements:
the calculated annual primary and final energy consumption in kWh or MWh;
renewable energy production in kWh or MWh; main energy carrier and type of renewable energy source;
the calculated energy needs in kWh/(m2.y);
a yes/no indication whether the building has a capacity to react to external signals and adjust the energy consumption;
a yes/no indication whether the heat distribution system inside the building is capable to work at low or more efficient temperature levels, where applicable;
the contact information of the relevant one-stop shop for renovation advice.
In addition, the energy performance certificate may include the following indicators:
energy use, peak load, size of generator or system, main energy carrier and main type of element for each of the uses: heating, cooling, domestic hot water, ventilation and in-built lighting;
the greenhouse gas emission class (if applicable);
information on carbon removals associated to the temporary storage of carbon in or on buildings;
a yes/no indication whether a renovation passport is available for the building;
the average U-value for the opaque elements of the building envelope;
the average U-value for the transparent elements of the building envelope;
type of most common transparent element (e.g. double-glazed window);
results of the analysis on overheating risk (if available);
the presence of fixed sensors that monitor the indoor environmental quality;
the presence of fixed controls that respond to the levels of indoor environmental quality;
number and type of recharging points for electric vehicles;
presence, type and size of energy storage systems;
expected remaining lifespan of the heating or air-conditioning systems and appliances, where applicable;
feasibility of adapting the heating system to operate at more efficient temperature settings;
feasibility of adapting the domestic hot-water system to operate at more efficient temperature settings;
feasibility of adapting the air-conditioning system to operate at more efficient temperature settings;
metered energy consumption;
whether there is a connection to a district heating and cooling network, and, if available, information about a potential connection to an efficient district heating and cooling system;
local primary energy factors and related carbon emission factors of the connected local district heating and cooling network;
operational fine particulate matter (PM2,5) emissions.
The energy performance certificate may include the following links with other initiatives if these apply in the relevant Member State:
a yes/no indication whether a smart readiness assessment has been carried out for the building;
where available, the value of the smart readiness assessment;
a yes/no indication whether a Digital Building Logbook is available for the building.
Persons with disabilities shall have equal access to the information in energy performance certificates.