Art. 7 Regulation (EU) 2023/2866

Chassis dynamometer test result of an individual test vehicle

In forcesince 15 Dec 2023
1.

The granting type-approval authority shall calculate the RCB, target speed and distance corrections referred to in Annex B7 or, where applicable, B6 or B8, to UN Regulation No 154, using the results of the chassis dynamometer test performed.

For the calculation of the Ki, KCO2 and ATCT family correction factors referred to in Annex B6, B7 and B8 to UN Regulation No 154, the granting type-approval authority shall do any of the following:

(a)

apply the Ki, KCO2 and ATCT family correction factors which were used for type-approval;

(b)

calculate the Ki, KCO2 and ATCT family correction factors based on tests performed on the vehicle selected for the in-service verification test following the procedures described in Annex B6, B7 and B8 to UN Regulation No 154.

2.

For each individual test vehicle, other than an OVC-HEV, undergoing a chassis dynamometer test, the granting type-approval authority shall determine the chassis dynamometer test result (CO2 ratio) as the ratio of the CO2 emission value calculated from the chassis dynamometer test, taking into account the correction factors referred to in paragraph 1 (CO2, in-service verification) to the combined CO2 emission value recorded in entry 49 of the certificate of conformity of that vehicle (CO2, CoC).

3.

For each OVC-HEV undergoing a chassis dynamometer test, the granting type-approval authority shall determine the chassis dynamometer test result (CO2 ratio) as the ratio of the CO2 emission value calculated from the chassis dynamometer test in charge sustaining mode according to Annex B8 to UN Regulation No 154, taking into account the correction factors referred to in paragraph 1 (CO2, in-service verification) to the combined charge sustaining CO2 emission value recorded in entry 49 of the certificate of conformity of that vehicle (CO2, CoC).

In addition, the granting type-approval authority shall determine the equivalent all electric range and CO2 emission value calculated from the chassis dynamometer test in charge depleting mode according to Annex B8 to UN Regulation No 154, taking into account the correction factors referred to in paragraph 1.

The test report shall include the ratio of the weighted combined CO2 emission value calculated from the chassis dynamometer tests, taking into account the correction factors referred to in paragraph 1, to the weighted combined CO2 emission value recorded in entry 49 of the certificate of conformity of that vehicle, as well as information on the deterioration of the traction battery over time and the equivalent all electric range.

4.

For each individual test vehicle, the granting type-approval authority shall, before and after the chassis dynamometer test, read out from the on-board diagnostics serial port of the vehicle the values of the real-world data as defined in Article 2(c) of Implementing Regulation (EU) 2021/392, using a generic scan-tool. The granting type-approval authority shall include these values in the test report, together with the value for ‘fuel_consumed WLTP’ in accordance with Annex C5 to UN Regulation No 154.