For the purposes of this Regulation, the following definitions shall apply:
‘household tumble dryer’ means an appliance in which textiles are dried by tumbling in a rotating drum through which heated air is passed and which is declared by the manufacturer in the declaration of conformity as complying with Directive 2014/35/EU of the European Parliament and of the Council [Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits (OJ L 96, 29.3.2014, p. 357).] or with Directive 2014/53/EU of the European Parliament and of the Council [Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC (OJ L 153, 22.5.2014, p. 62).];
‘mains’ means the electricity supply from the grid of 230 (± 10 %) volts of alternating current at 50 Hz;
‘gas-fired tumble dryer’ means a household tumble dryer which uses gas to heat the inside air;
‘built-in household tumble dryer’ means a household tumble dryer that is designed, tested and marketed exclusively to comply with all the following characteristics:
to be installed in cabinetry or encased (top and/or bottom, and sides) by panels;
to be securely fastened to the sides, top or floor of the cabinetry or panels;
to be equipped with an integral factory-finished face or to be fitted with a custom front panel;
‘household washer-dryer’ means an appliance as defined in Article 2(4) of Commission Regulation (EU) 2019/2023 [Commission Regulation (EU) 2019/2023 of 1 October 2019 laying down ecodesign requirements for household washing machines and household washer-dryers pursuant to Directive 2009/125/EC of the European Parliament and of the Council, amending Commission Regulation (EC) No 1275/2008 and repealing Commission Regulation (EU) No 1015/2010 (OJ L 315, 5.12.2019, p. 285).];
‘household spin-extractor’ means an appliance in which water is removed from the textiles by centrifugal action in a rotating drum and drained through an automatic pump or by gravity and which is designed to be used principally for non-professional purposes and is also commercially known as ‘spin-dryer’;
‘multi-drum household tumble dryer’ means a household tumble dryer equipped with more than one drum, whether in separate casings or in the same casing;
‘equivalent model’ means a model which has the same technical characteristics relevant for the technical information to be provided, but which is placed on the market or put into service by the same manufacturer, importer or authorised representative as another model with a different model identifier;
‘programme’ means a series of operations that are pre-defined and which are declared by the manufacturer, importer or authorised representative as suitable for drying certain types of textile;
‘model identifier’ means the code, usually alphanumeric, which distinguishes a specific product model from other models with the same trade mark or the same manufacturer’s, importer’s or authorised representative’s name;
‘declared values’ means the values provided by the manufacturer, importer or authorised representative for the stated, calculated or measured technical parameters in accordance with Article 4, for the verification of compliance by the Member State authorities;
‘product database’ means a database as defined in Article 2, point (25) of Regulation (EU) 2017/1369;
‘rated capacity’ means the maximum mass in kilograms, stated by the manufacturer, importer or authorised representative, at 0,5 kg intervals, of dry textiles of a particular type, which can be treated in one drying cycle of a household tumble dryer on the selected programme, when loaded in accordance with the manufacturer’s instructions;
‘eco programme’ means a programme which is able to dry cotton laundry from an initial moisture content of the load of 60 % down to a final moisture content of the load of 0 %;
‘initial moisture content’ means the amount of moisture contained in the load at the beginning of the drying cycle;
‘final moisture content’ means the amount of moisture contained in the load at the end of the drying cycle;
‘drying cycle’ means a complete drying process, as defined by the required programme, consisting of a series of different operations including heating and tumbling.
For the purposes of Annexes II to V, additional definitions set out in Annex I apply.