These BAT conclusions concern the following activities specified in Annex I to Directive 2010/75/EU:
6.4. (a) Operating slaughterhouses with a carcass production capacity greater than 50 tonnes per day.
6.5. Disposal or recycling of animal carcases or animal waste with a treatment capacity exceeding 10 tonnes per day.
6.11. Independently operated treatment of waste water not covered by Directive 91/271/EEC [Council Directive 91/271/EEC of 21 May 1991 concerning urban waste-water treatment (OJ L 135, 30.5.1991, p. 40).], provided that the main pollutant load originates from the activities covered by these BAT conclusions.
These BAT conclusions also cover the following:
the processing of animal by-products and/or edible co-products (such as rendering, fat melting, feather processing, fishmeal and fish oil production, blood processing and gelatine manufacturing) covered by the activity description in points 6.4 (b) (i) and/or 6.5 of Annex I to Directive 2010/75/EU;
the combustion of meat-and-bone meal and/or animal fat;
the combustion (e.g. in thermal oxidisers or steam boilers) of malodorous gases (originating from the activities covered by these BAT conclusions), including non-condensable gases;
the incineration of carcasses if directly associated with the activities covered by these BAT conclusions;
the preservation of hides and skins if directly associated with the activities covered by these BAT conclusions;
the handling of casings and offal (viscera);
composting and anaerobic digestion if directly associated with the activities covered by these BAT conclusions;
the combined treatment of waste water from different origins, provided that the main pollutant load originates from the activities covered by these BAT conclusions and that the waste water treatment is not covered by Directive 91/271/EEC1.
These BAT conclusions do not cover the following:
On-site combustion plants, not covered by the above bullet points, generating hot gases that are not used for direct contact heating, drying or any other treatment of objects or materials. These may be covered by the BAT conclusions for Large Combustion Plants (LCP) or by Directive (EU) 2015/2193 of the European Parliament and of the Council [Directive (EU) 2015/2193 of the European Parliament and of the Council of 25 November 2015 on the limitation of emissions of certain pollutants into the air from medium combustion plants (OJ L 313, 28.11.2015, p. 1).].
The production of food after the making of standard cuts for large animals or of cuts for poultry. This may be covered by the BAT conclusions for the Food, Drink and Milk Industries (FDM).
Landfill of waste. This is covered by Council Directive 1999/31/EC [Council Directive 1999/31/EC of 26 April 1999 on the landfill of waste (OJ L 182, 16.7.1999, p. 1).]. In particular, underground permanent and long-term storage (≥ 1 year before disposal, ≥ 3 years before recovery) are covered by Directive 1999/31/EC.
Other BAT conclusions and reference documents which could be relevant for the activities covered by these BAT conclusions include the following:
Large Combustion Plants (LCP);
Food, Drink and Milk Industries (FDM);
Common Waste Water and Waste Gas Treatment/Management Systems in the Chemical Sector (CWW);
Waste Treatment (WT);
Waste Incineration (WI);
Tanning of Hides and Skins (TAN);
Monitoring of Emissions to Air and Water from IED Installations (ROM);
Economics and Cross-Media Effects (ECM);
Emissions from Storage (EFS);
Energy Efficiency (ENE);
Industrial Cooling Systems (ICS).
These BAT conclusions apply without prejudice to other relevant legislation, e.g. on hygiene, food/feed safety, animal welfare, biosecurity, energy efficiency (energy efficiency first principle).
For the purposes of these BAT conclusions, the following definitions apply:
[OJ L 300, 14.11.2009, p. 1.] [Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).]
General terms
Term used | Definition
Animal by-products | As defined in Regulation (EC) No 1069/2009 of the European Parliament and of the Council of 21 October 2009 laying down health rules as regards animal by-products and derived products not intended for human consumption and repealing Regulation (EC) No 1774/2002 (Animal by-products Regulation).
Channelled emissions | Emissions of pollutants to air through any kind of duct, pipe, stack, etc. This includes emissions from open-top biofilters.
Direct discharge | Discharge to a receiving water body without further downstream waste water treatment.
Edible co-products | Food-grade products intended for human consumption.
Existing plant | A plant that is not a new plant.
FDM activities | Activities covered by the BAT conclusions for the Food, Drink and Milk Industries.
FDM products | Products associated with activities covered by the BAT conclusions for the Food, Drink and Milk Industries.
Hazardous substance | Hazardous substance as defined in point 18 of Article 3 of Directive 2010/75/EU.
Indirect discharge | Discharge which is not a direct discharge.
New plant | A plant first permitted at the site of the installation following the publication of these BAT conclusions or a complete replacement of a plant following the publication of these BAT conclusions.
Sensitive receptor |
Areas which need special protection, such as:
residential areas;
areas where human activities are carried out (e.g. neighbouring workplaces, schools, day-care centres, recreational areas, hospitals or nursing homes).
Substances of very high concern | Substances meeting the criteria mentioned in Article 57 and included in the Candidate List of Substances of Very High Concern, according to the REACH Regulation ((EC) No 1907/2006).
Pollutants and parameters
Term used | Definition
AOX | Adsorbable organically bound halogens, expressed as Cl, include adsorbable organically bound chlorine, bromine and iodine.
As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb, Tl, V | Arsenic, cadmium, cobalt, chromium, copper, manganese, nickel, lead, antimony, thallium and vanadium.
Biochemical oxygen demand (BODn) | Amount of oxygen needed for the biochemical oxidation of the organic matter to carbon dioxide in n days (n is typically 5 or 7). BOD is an indicator for the mass concentration of biodegradable organic compounds.
Chemical oxygen demand (COD) | Amount of oxygen needed for the total chemical oxidation of the organic matter to carbon dioxide using dichromate. COD is an indicator for the mass concentration of organic compounds.
CO | Carbon monoxide.
Copper (Cu) | Copper, expressed as Cu, includes all inorganic and organic copper compounds, dissolved or bound to particles.
Dust | Total particulate matter (in air).
HCl | All inorganic gaseous chlorine compounds, expressed as HCl.
HF | All inorganic gaseous fluorine compounds, expressed as HF.
Hg | The sum of mercury and its compounds, expressed as Hg.
H2S | Hydrogen sulphide.
Odour concentration | Number of European Odour Units (ouE) in a cubic metre of gas at standard conditions for olfactometry according to EN 13725.
NOX | The sum of nitrogen monoxide (NO) and nitrogen dioxide (NO2), expressed as NO2.
PCDD/F | Polychlorinated dibenzo-p-dioxins and -furans.
SOX | The sum of sulphur dioxide (SO2), sulphur trioxide (SO3), and sulphuric acid aerosols, expressed as SO2.
Total nitrogen (Total N) | Total nitrogen, expressed as N, includes free ammonia and ammonium nitrogen (NH4-N), nitrite nitrogen (NO2-N), nitrate nitrogen (NO3-N) and organically bound nitrogen.
Total organic carbon (TOC) | Total organic carbon (in water), expressed as C, includes all organic compounds.
Total phosphorus (Total P) | Total phosphorus, expressed as P, includes all inorganic and organic phosphorus compounds, dissolved or bound to particles.
Total suspended solids (TSS) | Mass concentration of all suspended solids (in water), measured via filtration through glass fibre filters and gravimetry.
Total volatile organic carbon (TVOC) | Total volatile organic carbon (in air), expressed as C.
Zinc (Zn) | Zinc, expressed as Zn, includes all inorganic and organic zinc compounds, dissolved or bound to particles.
For the purposes of these BAT conclusions, the following acronyms apply:
Acronym | Definition
CIP | Cleaning-in-place
CMS | Chemicals management system
EMS | Environmental management system
FDM | Food, drink and milk
IED | Industrial Emissions Directive (2010/75/EU)
OTNOC | Other than normal operating conditions
SA | Slaughterhouses, animal by-products and/or edible co-products industries
The techniques listed and described in these BAT conclusions are neither prescriptive nor exhaustive. Other techniques may be used that ensure at least an equivalent level of environmental protection.
Unless otherwise stated, the BAT conclusions are generally applicable.
The BAT-AELs for emissions to water given in these BAT conclusions refer to concentrations (mass of emitted substances per volume of water), expressed in mg/l.
Averaging periods associated with the BAT-AELs refer to either of the following two cases:
In the case of continuous discharge, daily average values, i.e. 24-hour flow-proportional composite samples.
In the case of batch discharge, average values over the release duration taken as flow-proportional composite samples, or, provided that the effluent is appropriately mixed and homogeneous, a spot sample taken before discharge.
Time-proportional composite samples can be used provided that sufficient flow stability is demonstrated. Alternatively, spot samples may be taken, provided that the effluent is appropriately mixed and homogeneous.
In the case of total organic carbon (TOC), total nitrogen (TN) and chemical oxygen demand (COD), the calculation of the average abatement efficiency referred to in these BAT conclusions (see Table 1.1) is based on the influent and effluent load of the waste water treatment plant.
The BAT-AELs apply at the point where the emission leaves the installation.
The BAT-AELs and the indicative emission level for channelled emissions to air given in these BAT conclusions refer to concentrations (mass of emitted substances per volume of waste gas) under the following standard conditions: dry gas at a temperature of 273,15 K (or wet gas at a temperature of 293 K in the case of odour concentration) and a pressure of 101,3 kPa, without correction to a reference oxygen level, and expressed in the unit mg/Nm3 or ouE/m3.
For averaging periods of BAT-AELs and the indicative emission level for channelled emissions to air, the following definition applies.
[For any parameter where, due to sampling or analytical limitations, a 30-minute sampling/measurement is inappropriate, a more representative sampling/measurement procedure may be employed (e.g. for the odour concentration).]
Type of measurement | Averaging period | Definition
Periodic | Average over the sampling period | Average value of three consecutive samplings/measurements of at least 30 minutes each.
When the waste gases of two or more sources (e.g. dryers) are discharged through a common stack, the BAT-AEL and the indicative emission level apply to the combined discharge from the stack.
The indicative emission levels for refrigerant losses refer to a rolling average over 3 years of yearly losses. Yearly losses are expressed as a percentage (%) of the total amount of refrigerant contained in the cooling system(s). The losses for a specific refrigerant in 1 year are equal to the amount of that refrigerant used to refill the cooling system(s).
The environmental performance levels related to specific waste water discharge refer to yearly averages and are calculated using the following equation:
where:
waste water dischargetotal amount of waste water discharged (direct discharge, indirect discharge and/or landspreading) by the specific processes concerned, expressed in m3/year, excluding any cooling water and run-off water that is discharged separately;
activity rate
total amount of products or raw materials processed, expressed in:
tonnes of carcasses/year or animals/year for slaughterhouses;
tonnes of raw materials/year for installations processing animal by-products and/or edible co-products.
The carcass weight depends on the animal species under consideration:
Pigs: the weight of the slaughtered animal’s cold body, either whole or divided in half along the midline, after being bled and eviscerated and after removal of the tongue, bristles, hooves, genitalia, flare fat, kidneys and diaphragm.
Cattle: the weight of the slaughtered animal’s cold body after being skinned, bled and eviscerated, and after removal of the external genitalia, limbs, head, tail, kidneys and kidney fats, and the udder.
Chickens: the weight of the slaughtered animal’s cold body after being bled, plucked and eviscerated. The weight includes offal (viscera).
The environmental performance levels related to specific net energy consumption refer to yearly averages and are calculated using the following equation:
where:
final net energy consumptiontotal amount of energy consumed (excluding the recovered energy) by the installation (in the form of heat and electricity), expressed in kWh/year;
activity rate
total amount of products or raw materials processed, expressed in:
tonnes of carcasses/year or animals/year for slaughterhouses;
tonnes of raw materials/year for installations processing animal by-products and/or edible co-products.
The carcass weight depends on the animal species under consideration (see General consideration for BAT-AEPLs for specific waste water discharge).
Unless otherwise stated, the calculation of the energy consumption of slaughterhouses may include the energy consumed by FDM activities.
BAT 1. In order to improve the overall environmental performance, BAT is to elaborate and implement an environmental management system (EMS) that incorporates all of the following features:
commitment, leadership, and accountability of the management, including senior management, for the implementation of an effective EMS;
an analysis that includes the determination of the organisation’s context, the identification of the needs and expectations of interested parties, the identification of characteristics of the installation that are associated with possible risks for the environment and human health as well as of the applicable legal requirements relating to the environment;
iii. development of an environmental policy that includes the continuous improvement of the environmental performance of the installation;
iv. establishing objectives and performance indicators in relation to significant environmental aspects, including safeguarding compliance with applicable legal requirements;
planning and implementing the necessary procedures and actions (including corrective and preventive actions where needed), to achieve the environmental objectives and avoid environmental risks;
vi. determination of structures, roles and responsibilities in relation to environmental aspects and objectives and provision of the financial and human resources needed;
vii. ensuring the necessary competence and awareness of staff whose work may affect the environmental performance of the installation (e.g. by providing information and training);
viii. internal and external communication;
ix. fostering employee involvement in good environmental management practices;
establishing and maintaining a management manual and written procedures to control activities with significant environmental impact as well as relevant records;
xi. effective operational planning and process control;
xii. implementation of appropriate maintenance programmes;
xiii. emergency preparedness and response protocols, including the prevention and/or mitigation of the adverse (environmental) impacts of emergency situations;
xiv. when (re)designing a (new) installation or a part thereof, consideration of its environmental impacts throughout its life, which includes construction, maintenance, operation and decommissioning;
xv. implementation of a monitoring and measurement programme; if necessary, information can be found in the Reference Report on Monitoring of Emissions to Air and Water from IED Installations;
xvi. application of sectoral benchmarking on a regular basis;
xvii. periodic independent (as far as practicable) internal auditing and periodic independent external auditing in order to assess the environmental performance and to determine whether or not the EMS conforms to planned arrangements and has been properly implemented and maintained;
xviii. evaluation of causes of nonconformities, implementation of corrective actions in response to nonconformities, review of the effectiveness of corrective actions, and determination of whether similar nonconformities exist or could potentially occur;
xix. periodic review, by senior management, of the EMS and its continuing suitability, adequacy and effectiveness;
following and taking into account the development of cleaner techniques.
Specifically for slaughterhouses as well as the processing of animal by-products and/or edible co-products, BAT is also to incorporate the following features in the EMS:
xxi. an odour management plan (see BAT 18);
xxii. an inventory of inputs and outputs (see BAT 2);
xxiii. a chemicals management system (see BAT 3);
xxiv. an energy efficiency plan (see BAT 9 (a));
xxv. a water management plan (see BAT 10 (a));
xxvi. a noise management plan (see BAT 16);
xxvii. an OTNOC management plan (see BAT 4).
xxviii. a refrigeration management plan for slaughterhouses (see BAT 21 (a) and BAT 23 (a)).
Regulation (EC) No 1221/2009 establishes the European Union eco-management and audit scheme (EMAS), which is an example of an EMS consistent with this BAT.
The level of detail and the degree of formalisation of the EMS will generally be related to the nature, scale and complexity of the installation, and the range of environmental impacts it may have.
BAT 2. In order to improve the overall environmental performance, BAT is to establish, maintain and regularly review (including when a significant change occurs) an inventory of inputs and outputs, as part of the environmental management system (see BAT 1) that incorporates all of the following features:
Information about the production process(es), including:
simplified process flow sheets that show the origin of the emissions;
descriptions of process-integrated techniques and waste water/waste gas treatment techniques to prevent or reduce emissions, including their performance (e.g. abatement efficiency).
Information about energy consumption and usage.
Information about water consumption and usage (e.g. flow diagrams and water mass balances).
Information about the quantity and characteristics of the waste water streams, such as:
average values and variability of flow, pH and temperature;
average concentration and mass flow values of relevant substances/parameters (e.g. COD/TOC, nitrogen species, phosphorus) and their variability.
Information about the characteristics of the waste gas streams, such as:
emission point(s);
average values and variability of flow and temperature;
average concentration and mass flow values of relevant substances/parameters (e.g. dust, TVOC, NOX, SOX) and their variability;
presence of other substances that may affect the waste gas treatment system or plant safety (e.g. oxygen, water vapour, dust).
Information about the quantity and characteristics of the chemicals used:
the identity and the characteristics of the chemicals used, including properties with adverse effects on the environment and/or human health;
the quantities of chemicals used and the location of their use.
The level of detail and the degree of formalisation of the inventory will generally be related to the nature, scale and complexity of the installation, and the range of environmental impacts it may have.
BAT 3. In order to improve the overall environmental performance, BAT is to elaborate and implement a chemicals management system (CMS) as part of the EMS (see BAT 1) that incorporates all of the following features:
A policy to reduce the consumption and risks associated with chemicals, including a procurement policy to select less harmful chemicals and their suppliers with the aim of minimising the use and risks associated with hazardous substances and substances of very high concern and avoiding the procurement of an excess amount of chemicals. The selection of chemicals is based on:
the comparative analysis of their bioeliminability/biodegradability, ecotoxicity and potential to be released into the environment, in order to reduce emissions to the environment;
the characterisation of the risks associated with the chemicals, based on the chemicals’ hazard classification, pathways through the plant, potential release and level of exposure;
the regular (e.g. annual) analysis of the potential for substitution to identify potentially new available and safer alternatives to the use of hazardous substances and substances of very high concern (e.g. use of other chemicals with no or lower impacts on the environment and/or human health, see BAT 11 (a));
the anticipatory monitoring of regulatory changes related to hazardous substances and substances of very high concern and the safeguarding of compliance with applicable legal requirements.
The inventory of chemicals (see BAT 2) may be used to provide and keep the information needed for the selection of chemicals.
Goals and action plans to avoid or reduce the use and risks associated with hazardous substances and substances of very high concern.
Development and implementation of procedures for the procurement, handling, storage and use of chemicals to prevent or reduce emissions to the environment.
The level of detail and the degree of formalisation of the CMS will generally be related to the nature, scale and complexity of the plant.
BAT 4. In order to reduce the frequency of the occurrence of OTNOC and to reduce emissions during OTNOC, BAT is to set up and implement a risk-based OTNOC management plan as part of the EMS (see BAT 1) that includes all of the following elements:
identification of potential OTNOC (e.g. failure of equipment critical to the protection of the environment (‘critical equipment’)), of their root causes and of their potential consequences;
appropriate design of critical equipment (e.g. waste water treatment plant);