The EU Ecolabel criteria target the best absorbent hygiene products on the market, in terms of environmental performance. The criteria focus on the main environmental impacts associated with the life cycle of these products and promote circular economy aspects.
For the EU Ecolabel to be awarded to a specific product, the product shall comply with each requirement. The applicant shall provide a written confirmation stating that all the criteria are fulfilled.
Specific assessment and verification requirements are indicated within each criterion.
Where the applicant is required to provide declarations, documentation, analyses, test reports, or other evidence to show compliance with the criteria, these may originate from the applicant and/or their supplier(s) as appropriate.
Competent bodies shall preferentially recognise attestations that are issued by bodies accredited in accordance with the relevant harmonised standard for testing and calibration laboratories, and verifications by bodies that are accredited in accordance with the relevant harmonised standard for bodies certifying products, processes, and services.
Where appropriate, test methods other than those indicated for each criterion may be used if the competent body assessing the application accepts their equivalence.
Where appropriate, competent bodies may require supporting documentation and may carry out independent verifications.
Changes in suppliers and production sites pertaining to products to which the EU Ecolabel has been awarded shall be notified to competent bodies, together with supporting information to enable verification of continued compliance with the criteria.
As pre-requisite, the product shall meet all respective legal requirements of the country or countries in which the product is intended to be placed on the market. The applicant shall declare the product’s compliance with this requirement.
The following information shall be provided together with the application for the EU Ecolabel:
a description of the product, together with the weight of the individual product units and the total weight of the product;
a description of the sales packaging, together with its total weight, if applicable;
a description of the grouped packaging, together with its total weight, if applicable;
a description of the separate components, together with their individual weight;
the components, materials and all substances used in the product with their respective weights and, whenever applicable, their respective CAS numbers.
For the purposes of this Annex, the following definitions shall apply:
‘additives’ means substances added to components, materials or the final product in order to improve or preserve some of its characteristics;
‘biobased plastic’ means a plastic manufactured from biobased raw materials as feedstock for its production. While conventional plastics are made from fossil resources (oil and natural gas), biobased plastics are made from biomass. The biomass currently originates mainly from plants grown specifically to be used as feedstock to substitute fossil resources, such as sugarcane, cereal crops, oil crops or non-food sources like wood. Other sources are organic waste and by-products, such as used cooking oil, bagasse and tall oil. Plastics can be fully or partially made from biobased feedstock. Biobased plastics can be both biodegradable and non-biodegradable;
‘cellulose pulp’ means a fibrous material mainly composed of cellulose and obtained from the treatment of lignocellulosic materials with one or more aqueous solutions of pulping and/or bleaching chemicals;
‘component’ means one or several materials and chemical products that together fulfil a desirable function in the absorbent hygiene product, such as an absorbent core, adhesives, or an outer barrier film;
‘composite packaging’ means a unit of packaging made of two or more different materials, excluding materials used for labels, closures and sealing, which cannot be separated manually and therefore form a single integral unit;
‘grouped packaging’, also known as secondary packaging, means packaging conceived so as to constitute a grouping of a certain number of sales units at the point of sale whether the latter is sold as such to the end user or it serves only as a means to replenish the shelves at the point of sale or create a stock-keeping or distribution unit, and which can be removed from the product without affecting its characteristics;
‘impurities’ means residuals, pollutants, contaminants etc. from production, including the production of raw materials, that remain in the raw material/ingredient and/or in the chemical product (used in the final product and any component therein) in concentrations less than 100 ppm (0,0100 % w/w, 100 mg/kg);
‘ingoing substance’ means all substances included in the chemical product (used in the final product and any component therein), including additives (e.g. preservatives and stabilisers) in the raw materials. Substances known to be released from ingoing substances in stabilized manufacturing conditions (e.g. formaldehyde and arylamine) are also considered as ingoing substances;
‘man-made cellulose fibres’, also known as regenerated fibres, means fibres produced from the raw material cellulose which include viscose, modal, lyocell, cupro and triacetate;
‘materials’ mean the materials constituting different components of an absorbent hygiene product, such as fluff pulp, cotton or polypropylene (PP);
‘packaging’ means items of any materials that are intended to be used for the containment, protection, handling, delivery or presentation of products and that can be differentiated into packaging formats based on their function, material and design, including:
items that are necessary to contain, support or preserve the product throughout its lifetime without being an integral part of the product which is intended to be used, consumed or disposed of together with the product;
components of, and ancillary elements to, an item referred to in point (a) that are integrated into the item;
ancillary elements to an item referred to in point (a) that are hung directly on, or attached to, the product and that perform a packaging function without being an integral part of the product which is intended to be used, consumed or disposed of together with the product; etc.;
‘plastic materials’, also referred to as ‘plastics’, means polymers within the meaning of Article 3(5) of Regulation (EC) No 1907/2006 of the European Parliament and of the Council [Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), establishing a European Chemicals Agency, amending Directive 1999/45/EC and repealing Council Regulation (EEC) No 793/93 and Commission Regulation (EC) No 1488/94 as well as Council Directive 76/769/EEC and Commission Directives 91/155/EEC, 93/67/EEC, 93/105/EC and 2000/21/EC (OJ L 396, 30.12.2006, p. 1).], to which additives or other substances may have been added, and which are capable of functioning as main structural components of final products and/or packaging, with the exception of natural polymers that have not been chemically modified;
‘polymer’ means a substance consisting of molecules characterised by the sequence of one or more types of monomer units. Such molecules must be distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units. A polymer comprises the following: (a) a simple weight majority of molecules containing at least three monomer units which are covalently bound to at least one other monomer unit or other reactant; (b) less than a simple weight majority of molecules of the same molecular weight. In the context of this definition, a ‘monomer unit’ means the reacted form of a monomer substance in a polymer, as defined in Regulation (EC) No 1907/2006;
‘product unit’ means the smallest item that can be used by the consumer and that fulfils the product’s function;
‘recyclability’ means the amount (mass or percentage) of an item available for recycling;
‘recycled content’ means the amount of an item (by area, length, volume or mass) that is sourced from post-consumer and/or post-industrial recycled material. Item can refer to the product or to the packaging in this case;
‘recycling’ means, in accordance with Article 3 of Directive 2008/98/EC of the European Parliament and of the Council [Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives (OJ L 312, 22.11.2008, p. 3).], any recovery operation by which waste materials are reprocessed into products, materials or substances whether for the original or other purposes. It includes the reprocessing of organic material but does not include energy recovery and the reprocessing into materials that are to be used as fuels or for backfilling operations;
‘sales packaging’, also known as primary packaging, means packaging conceived so as to constitute a sales unit consisting of products and packaging to the final user or consumer at the point of sale;
‘separate component’, also known as additional component, means a packaging component that is distinct from the main body of the packaging unit, which may be of a different material, that needs to be disassembled completely and permanently from the main packaging unit in order to access the product, and that is typically discarded prior to and separately from the packaging unit. In the case of absorbent hygiene products, it is any component with protective or hygienic function that is removed before the use of the product, e.g. the individual wrapping or film where some absorbent hygiene products are contained within the sales packaging (mainly for tampons and sanitary pads), the release liner and paper in baby diapers and sanitary pads, or the applicator for tampons;
‘substances identified to have endocrine disrupting properties’, also referred to as endocrine disruptors, means substances which have been identified to have endocrine disrupting properties (human health and/or environment) according to Article 57(f) of Regulation (EC) No 1907/2006 (candidate list of substances of very high concern for authorisation), or Regulation (EU) No 528/2012 of the European Parliament and of the Council [Regulation (EU) No 528/2012 of the European Parliament and Council of 22 of May 2012 concerning the making available on the market and use of biocidal products (OJ L 167, 27.6.2012, p. 1).] or Regulation (EC) No 1107/2009 of the European Parliament and of the Council [Regulation (EC) No 1107/2009 of the European Parliament and of the Council of 21 October 2009 concerning the placing of plant protection products on the market and repealing Council Directives 79/117/EEC and 91/414/EEC (OJ L 309, 24.11.2009, p. 1).], or Regulation (EC) No 1272/2008 of the European Parliament and of the Council [Regulation (EC) No 1272/2008 of the European Parliament and of the Council of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006 (OJ L 353, 31.12.2008, p. 1).];
‘super absorbent polymers’ means synthetic polymers designed for absorbing and retaining large amounts of liquid compared to their own mass;
‘synthetic polymers’ means macromolecular substances other than cellulose pulp intentionally obtained either by:
a polymerisation process such as poly-addition or poly-condensation or by any other similar process of combination of monomers and other starting substances;
chemical modification of natural or synthetic macromolecules;
microbial fermentation.
This criterion applies to fluff pulp that represents ≥ 1 % w/w of the final product.
All (100 %) fluff pulp suppliers shall hold valid chain of custody certificate issued by an independent third-party certification scheme such as FSC, PEFC or equivalent.
A minimum of 70 % of the wood raw materials used for the production of the fluff pulp shall be covered by valid Sustainable Forestry Management certificates issued by an independent third-party certification scheme such as FSC, PEFC or equivalent. The remaining proportion of the wood raw materials, including any virgin wood material, shall be controlled wood covered by a verification system which ensures that it is legally sourced and meets any other requirement of the certification scheme with respect to uncertified material.
The certification bodies issuing the chain of custody and/or the Sustainable Forestry Management certificates shall be accredited/recognised by that certification scheme.
The applicant shall provide a declaration of compliance supported by a valid, independently certified chain of custody certificates for the suppliers of all (100 %) fluff pulp used in the product. FSC, PEFC or equivalent schemes shall be accepted as independent third-party certification.
In addition, the applicant shall provide audited accounting documents that demonstrate that at least 70 % of the wood raw materials used for the production of the fluff pulp is defined as certified material according to valid FSC, PEFC or equivalent schemes. The audited accounting documents shall be valid for the whole duration of the EU Ecolabel licence. Competent bodies shall check the accounting documents again 12 months after the awarding of the EU Ecolabel licence.
If the fluff pulp is used in an air-laid material, then the air-laid material supplier shall allocate credits to the air-laid delivered to the product, providing invoices to support the number of credits allocated.
For the remaining proportion of wood raw materials, proof shall be provided that the content of uncertified virgin material does not exceed 30 % and that it is controlled wood covered by a verification system that ensures that it is legally sourced and meets any other requirement of the certification scheme with respect to uncertified material. In case the certification scheme does not specifically require that all virgin material is sourced from non-GMO species, additional evidence shall be provided to demonstrate this.
The pulp used in the product shall not be bleached with the use of elemental chlorine (Cl2) gas.
In the case of elemental chlorine free (ECF) pulp, the average annual adsorbable organically bound halogens (AOX) emissions, expressed in kg/air dried tonne (ADt), from the production of each pulp used in EU Ecolabel products shall not exceed 0,140 kg/ADt.
The applicant shall provide a declaration of compliance with this criterion, supported by a test report performed using the ISO 9562:2004 test method, including the AOX emissions relative to the ECF bleached pulp, expressed as kg AOX/ADt pulp. In case different pulp quality grades are used, the applicant shall provide the individual AOX emission corresponding to each pulp. Equivalent methods may be accepted as test methods if considered equivalent by a third-party, and shall be accompanied by detailed calculations showing compliance with this requirement and related supporting documentation.
Measurements of AOX emissions shall be taken on unfiltered and unsettled samples at the effluent discharge point of the mills’ wastewater treatment plant. In cases where the mill effluent is sent to a municipal or other third-party wastewater treatment plant, unfiltered and unsettled samples from the mill effluent sewer discharge point shall be analysed and the results multiplied by a standard removal efficiency factor for the municipal or third-party wastewater treatment plant. The removal efficiency factor shall be based on information provided by the operator of the municipal or other third-party wastewater treatment plant.
Information on the AOX emissions shall be expressed as the annual average from at least 12 measurements taken at least every month. In case of a new or rebuilt production plant, measurements shall be based on at least 45 subsequent days of stable running of the plant. The supporting documentation shall include an indication of the measurement frequency.
AOX shall only be measured in processes where chlorine compounds are used for bleaching the pulp (ECF bleaching). AOX does not need to be measured in the effluent from pulp production without bleaching or where bleaching is performed with chlorine-free substances.
The applicant shall also provide a declaration from the pulp manufacturer that elemental chlorine (Cl2) gas was not used.
In case the applicant does not use any ECF pulp, a corresponding declaration is sufficient.
The emissions to water and to air from the pulp production shall be expressed in terms of points (PCOD, PP, PS, PNOx). Points are calculated by dividing the actual emission value by the reference values reported in Table 1.
None of the individual points PCOD, PP, PS, and PNOx shall exceed 1,5.
The sum of the points (Ptotal = PCOD + PP + PS + PNOx) shall not exceed 4,0.
For each pulp ‘i’ sourced, the related measured emissions (expressed in kg/ADt) shall be weighted according to the proportion of pulp sourced (pulp ‘i’ with respect to air dried tonne of pulp ‘i’) and summed together. The reference values for each pulp type used are given in the Table 1. Finally, the total emissions shall be divided by the total reference value as shown in the following formula for COD:
PCOD
CODtotal
CODref, total
ni1
pulpi CODpulp, i
ni1
pulpi CODref, pulp, i
[Net emissions of P are considered in the calculation. The P naturally contained in wood raw materials and in water can be subtracted from the total emissions of P. Reductions up to 0,010 kg/ADt shall be accepted.] [The higher value refers to mills using eucalyptus and southern U.S. pine species from regions with higher levels of phosphorus and applies until 31 December 2026. From 1 January 2027, the limit of 0,03 kg P/ADt shall apply also to mills using eucalyptus and southern US pine species from regions with higher levels of phosphorus.] [For non-integrated mills, the raw material pulp(s) shall comply with the values listed for integrated mills, to which the emissions resulting from the conversion process should be added.]
Reference values (kg/ADt)
CODref | Pref | Sref | NOxref
Integrated mills
Bleached chemical pulp (others than sulphite) | 16,0 |
0,030
0,05
0,6 | 1,5
Bleached chemical pulp (sulphite) | 24,0 | 0,03 | 0,6 | 1,5
Unbleached chemical pulp | 6,5 | 0,02 | 0,6 | 1,5
Unbleached chemical pulp (only UKP-E quality) | 6,5 | 0,035 | 0,6 | 1,5
CTMP | 15,0 | 0,01 | 0,2 | 0,3
NSSC | 11 | 0,02 | 0,4 | 1,5
Non-integrated mills
Converting process | 1 | 0,001 | 0,15 | 0,6
The applicant shall provide detailed calculations and test data showing compliance with this criterion, together with related supporting documentation that include test reports using the following continuous or periodical monitoring standard test methods: COD: ISO 15705 or ISO 6060; Total P: EN ISO 6878; NOx: EN 14792, ISO 11564, or EPA Method 7e; S(sulphur oxides): EN 14791, EPA Method No 6C or 8; S(reduced sulphur): EPA No 15A, 16A, 16B or 16c; S content in oil: ISO 8754; S content in coal: ISO 19579; S content in biomass: EN 15289. Test methods whose scope and requirement standards are considered equivalent to the one of the named national and international standards and whose equivalency has been confirmed by an independent third-party shall be accepted. Rapid tests can also be used to monitor emissions as long as they are done regularly (e.g. monthly) against the relevant aforementioned standards or suitable equivalents.
In the case of COD measurements, continuous monitoring based on analysis of total organic carbon (TOC) shall be accepted as long as a correlation between TOC and COD results has been established for the site in question.
The minimum measurement frequency for COD measurements and for total P emissions shall be weekly. Emissions of S and NOx shall be measured at least twice per calendar year (separated by four to six months).
Data shall be reported as annual averages except in cases where:
the production campaign is for a limited time period only,
the production plant is new or has been rebuilt, in which case the measurements shall be based on at least 45 subsequent days of stable running of the plant.
Measurement results shall be representative of the respective campaign and a sufficient number of measurements shall have been taken place for each emission parameter. The supporting documentation shall include the measurement frequency and the calculation of the points for COD, Total P, S and NOx.
Measurements of emissions to water shall be taken on unfiltered and unsettled samples at the effluent discharge point of the mills’ wastewater treatment plant. In cases where the mill effluent is sent to a municipal or other third-party wastewater treatment plant, unfiltered and unsettled samples from the mill effluent sewer discharge point shall be analysed and the results multiplied by a standard removal efficiency factor for the municipal or third-party wastewater treatment plant. The removal efficiency factor shall be based on information provided by the operator of the municipal or other third- party wastewater treatment plant.
Emissions to air shall include all emissions of S and NOx that occur during the production of pulp, including steam generated outside the production site, minus any emissions allocated to the production of electricity. In cases where co-generation of heat and electricity occur at the same plant, the emissions of S compounds and NOx resulting from on-site electricity generation shall be subtracted from the total amount. The proportion of the emissions resulting from electricity generation shall be calculated as:
2 × (MWh(electricity))/[2 × MWh(electricity) + MWh(heat)]
In this calculation, ‘electricity’ is the electricity produced at the co-generation plant, and ‘heat’ is the net heat delivered from the co-generation plant to the pulp production.
Measurements of S compounds and NOx shall include recovery boilers, lime kilns, steam boilers and destructor furnaces for strong smelling gases. Diffuse emissions shall also be taken into account.
Reported emission values for S compounds shall include both oxidised and reduced S emissions (SO2 and total reduced sulphur (TRS) – measured as S). The S emissions related to the heat energy generation from oil, coal and other external fuels with known S content may be calculated instead of being measured, and shall be taken into account.