ANNEX III, Decision_act (EU) 2023/1586

In forcesince 26 Jul 2023

C-type standards provide specifications for a given category of machinery. The different types of machinery belonging to the category covered by a C-type standard have a similar intended use and present similar hazards. C-type standards may refer to A or B-type standards, indicating which of the specifications of the A or B-type standard are applicable to the category of machinery concerned. When, for a given aspect of machinery safety, a C-type standard deviates from the specifications of an A or B-type standard, the specifications of the C-type standard take precedence over the specifications of the A or B-type standard. Application of the specifications of a C-type standard on the basis of the manufacturer’s risk assessment confers a presumption of conformity with the essential health and safety requirements of the Machinery Directive covered by the standard. Certain C-type standards are organised as a series of several parts, Part 1 of the standard giving general specifications applicable to a family of machinery and other parts of the standard giving specifications for specific categories of machinery belonging to the family, supplementing or modifying the general specifications of Part 1. For C-type standards organised in this way, the presumption of conformity with the essential health and safety requirements of the Machinery Directive is conferred by application of the general Part 1 of the standard together with the relevant specific part of the standard.

No | Reference of standard | Date of withdrawal

1.

|

EN 303-5:2021

Heating boilers - Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW - Terminology, requirements, testing and marking

2 February 2025

2.

|

EN 474-1:2006+A6:2019

Earth-moving machinery - Safety - Part 1: General requirements

Restriction 1: This publication does not concern clause 5.8.1 Visibility-Operator’s field of view of this standard, but only in relation with EN 474-5:2006+A3:2013 requirements for hydraulic excavators, the application of which does not confer a presumption of conformity to the essential health and safety requirements 1.2.2 and 3.2.1 of Annex I to Directive 2006/42/EC. Restriction 2: With regards to Annex B.2 – Quick couplers, the harmonised standard EN 474-1:2006+A6:2019 does not confer a presumption of conformity to the essential health and safety requirements 1.1.2 b), 1.1.2 c) and 1.3.3 of Annex I to Directive 2006/42/EC when applied in combination with EN 474-4:2006+A2:2012 requirements for backhoe loaders and EN 474-5:2006+A3:2013 requirements for hydraulic excavators.

2 February 2025

3.

|

EN 13001-3-6:2018

Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders

11 October 2023

4.

|

EN 16952:2018

Agricultural machinery - Rough-terrain Work Platforms for Orchard’s operations (WPO) - Safety

2 February 2025

5.

|

EN ISO 19085-3:2017

Woodworking machines - Safety requirements - Part 3: Numerically controlled (NC) boring and routing machines (ISO 19085-3:2017)

Restriction: With regard to its point 6.6.2.2.3.1, the harmonised standard EN ISO 19085-3:2017 does not confer a presumption of conformity with the essential health and safety requirement set out in point 1.4.1 of Annex I to Directive 2006/42/EC, which requires that guards and protective devices must not be easy to by-pass.

2 February 2025

6.

|

EN 50636-2-107:2015

Safety of household and similar appliances - Part 2-107: Particular requirements for robotic battery powered electrical lawnmowers (IEC 60335-2-107:2012, modified)

EN 50636-2-107:2015/A1:2018

EN 50636-2-107:2015/A2:2020

11 October 2023

7.

|

EN 60335-1:2012

Household and similar electrical appliances - Safety - Part 1: General requirements (IEC 60335-1:2010, modified)

EN 60335-1:2012/AC:2014

EN 60335-1:2012/A11:2014

EN 60335-1:2012/A13:2017

11 October 2023

8.

|

EN 62841-4-2:2019

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, modified)

2 February 2025

9.

|

EN 62841-2-1:2018

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, modified)

EN 62841-2-1:2018/A11:2019

2 February 2025

10.

|

EN 62841-3-1:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified)

EN 62841-3-1:2014/AC:2015

EN 62841-3-1:2014/A11:2017

2 February 2025

11.

|

EN 62841-3-6:2014

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system (IEC 62841-3-6:2014, modified)

EN 62841-3-6:2014/AC:2015

EN 62841-3-6:2014/A11:2017

2 February 2025

12.

|

EN 62841-3-10:2015

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines (IEC 62841-3-10:2015, modified)

EN 62841-3-10:2015/AC:2016-07

EN 62841-3-10:2015/A11:2017

2 February 2025