Specified plants originating in third countries where the specified pest is known to be present shall be accompanied by a phytosanitary certificate indicating under the rubric ‘Additional Declaration’ one of the following:
that the plants have been grown throughout their life in a place of production which is registered and supervised by the national plant protection organisation in the country of origin and situated in a pest-free area established by that organisation in accordance with relevant International Standards for Phytosanitary Measures and on the basis of official surveys;
that the plants have been grown during a period of at least two years prior to export or in the case of plants which are younger than two years have been grown throughout their life in a place of production:
established as free from the specified pests in accordance with International Standards for Phytosanitary Measures;
registered and supervised by the national plant protection organisation in the country of origin;
subjected annually to at least two official inspections for any sign of the specified pest carried out at appropriate times and no signs of the pest have been found; and
where the plants have been grown in a site:
with physical protection against the introduction of the specified pest, or
with the application of appropriate preventive treatments and surrounded by a buffer zone with a width of at least 1 km where official surveys for the presence or signs of the specified pest are carried out annually at appropriate times; and
where immediately prior to export consignments of the plants have been subjected to an official inspection for the presence of the specified pest, in particular in roots and stems, including targeted destructive sampling; or
that the plants have been grown from rootstocks which meet the requirements of point (b), grafted with scions which meet the following requirements:
at the time of export, the grafted scions have been no larger than 1 cm in diameter at their thickest point; and
the grafted plants have been inspected in accordance with point (b)(iii).
The name of the pest-free area referred to in the first subparagraph, point (a), shall be mentioned under the rubric ‘place of origin’.
The surveys referred to in the first subparagraph, point (a), have been based on the Authority’s General guidelines for statistically sound and risk-based surveys of plant pests, while the survey design and sampling scheme used has been able to identify with a sufficient level of confidence, a low level of presence of infested plants.
The surveys referred to in the first subparagraph, point (b)(iv), second indent, have been based on the Authority’s General guidelines for statistically sound and risk-based surveys of plant pests, the survey design and sampling scheme used have been able to identify with at least 95 % confidence level of presence of infested plants of 1 %. In case signs of the specified pest have been found, eradication measures have been immediately taken to restore the pest freedom in the buffer zone.
The size of the sample for the inspection referred to in the first subparagraph, point (b)(v), shall be such as to enable at least the detection of 1 % level of infestation with a level of confidence of 99 %.
Specified plants introduced into the Union territory in accordance with paragraph 1, shall be inspected at the point of entry or at the approved control points.
The inspection methods applied shall aim at the detection of any sign of the specified pest, in particular in roots and stems, and include targeted destructive sampling. The size of the sample for inspection shall be such as to enable at least the detection of 1 % level of infestation with a level of confidence of 99 %, taking account of ISPM No 31 [Methodologies for sampling of consignments – Reference Standard ISPM No 31 by the Secretariat of the International Plant Protection Convention, Rome.].
The targeted destructive sampling referred to in this Article shall be carried out at the level set out in the table in Annex II.