Art. 5 Regulation (EU) 2022/1616

Requirements for documentation, instructions and labelling

In forcesince 3 Dec 2025cited 1×
1.

Individual batches of recycled plastic and of recycled plastic materials and articles shall be subject to a single document or record regarding their quality, and shall be identified by a unique number and the name of the manufacturing stage from which they originate.

2.

Recycled plastic placed on the market shall be accompanied by a declaration of compliance in accordance with Article 29.

3.

Recycled plastic delivered to converters shall bear a label affixed to each container showing the symbol defined in Annex II to Regulation (EC) No 1935/2004, followed by:

(a)

the symbol and the registry number of the decontamination installation where the recycled plastic was manufactured in accordance with Article 24,

(b)

the symbol followed by the batch number,

(c)

the percentage by weight of the recycled content,

(d)

the maximum percentage by weight of the recycled content that final recycled plastic materials and articles containing the recycled plastic may contain, if this is less than 100 %, and,

(e)

when the declaration referred to in paragraph 2 provides additional instructions, the symbol defined in ISO 7000 with reference number 1641.

4.

The labels referred to in paragraph 3 shall be at all times clearly legible, be located at a visible place, and be firmly attached.

The minimum font size on the labels shall be at least 17 points (6 mm) on containers of which the largest dimension is smaller than 75 centimetres, 23 points on containers of which the largest dimension is in between 75 centimetres and 125 centimetres, and 30 points on containers where the largest dimension exceeds 125 centimetres.

5.

By derogation to paragraph 4, labelling may be omitted from fixed containers mounted in installations or on vehicles.

6.

Restrictions and specifications laid down in Annex I concerning the use of recycled plastic materials or articles manufactured with a suitable recycling technology, and, where relevant, restrictions and specifications laid down in the authorisation concerning the use of recycled materials or articles manufactured with a recycling process shall be included in the labelling required by Article 15 of Regulation (EC) No 1935/2004 of recycled materials or articles provided to food business operators or to final consumers.

  • Regulation (EU) 2025/2269Lawamends

    В член 5, параграф 3 от Регламент (ЕС) 2022/1616 следва да се поясни, че той се отнася до етикетирането на контейнерите, в които се …