Approval authorities that find, pursuant to Articles 20 and 21, that the measures taken by the manufacturer to ensure the compliance of the aerodynamic devices, referred to in Article 11(1) point (a) and certified in accordance with Article 17, are not adequate, shall request the manufacturer of those aerodynamic devices to submit a plan of remedial measures no later than one month after receipt of the request by that manufacturer. Approval authorities may extend that period with up to one month where the manufacturer of those aerodynamic devices demonstrates that more time is necessary to submit the plan of remedial measures.
The plan of remedial measures shall apply to all the aerodynamic devices or, if applicable, to their respective families, which have been identified by the approval authority in its request.
Approval authorities shall approve or reject the plan of remedial measures within one month of its receipt. Approval authorities shall notify the manufacturer of the aerodynamic devices and all the other Member States of its decision to approve or reject the plan of remedial measures.
Approval authorities may require vehicle manufacturers who installed the aerodynamic devices concerned in their vehicles to issue a new manufacturer's records file, customers information file, individual vehicle approval certificate and certificate of conformity on the basis of the CO2 emissions and fuel consumption related properties of those aerodynamic devices obtained by means of the measures referred to in Article 22.
The manufacturers of the aerodynamic devices concerned shall be responsible for the execution of the approved plan of remedial measures.
The manufacturers of the aerodynamic devices concerned shall keep a record of every aerodynamic device recalled and repaired or modified and of the workshop which performed the repair. Approval authorities shall have access to those records on request during the execution of the plan of the remedial measures and for a period of 5 years after the completion of its execution.
An approval authority that rejects the plan of remedial measures or establishes that the remedial measures are not correctly applied shall take the necessary measures to ensure the conformity of CO2 emissions and fuel consumption related properties of the family of aerodynamic devices concerned or withdraw the certificate on CO2 emissions and fuel consumption related properties.