Annex I (Part-M) to Regulation (EU) No 1321/2014 is amended as follows:
in point M.A.201, the following points (ea) and (eb) are inserted:
‘(ea) By derogation to point (e)(2), at least two operators forming part of a single air carrier business grouping may use the same CAMO to assume the responsibility for the continuing airworthiness management of all the aircraft they operate, provided that all of the following requirements are met:
the CAMO is approved in accordance with Annex Vc (Part-CAMO) for the aircraft to be managed;
the CAMO forms part of the same air carrier business grouping as the operators concerned;
a contract is established in accordance with Appendix I to this Annex between the CAMO and the AOC holder not itself approved as a CAMO;
the CAMO has its principal place of business in the territory to which the Treaties apply;
the individual management systems of the organisations concluding a contract are harmonised with each other.
By derogation to point (e)(2), when the termination or revocation of an air operator certificate results in a situation where an air carrier licensed in accordance with Regulation (EC) No 1008/2008 and forming part of an air carrier business grouping is no longer in compliance with point M.A.201(ea), that licensed air carrier shall define and implement an action plan to the satisfaction of the competent authority to comply with point M.A.201(e)(2) as soon as practicable.’;
Appendix I is amended as follows:
point 4 is replaced by the following:
‘4. It shall state the following:
‘The owner or operator entrusts the CAMO or CAO with the management of the continuing airworthiness of the aircraft, including but not limited to the development of an AMP that shall be approved by the competent authority as detailed in point M.1 and the organisation of the maintenance of the aircraft according to said AMP.
According to the present contract, both signatories undertake to follow the respective obligations of this contract.
The owner or operator declares to the best of their knowledge that all the information given to the CAMO or CAO concerning the continuing airworthiness of the aircraft is and will continue to be accurate, and that the aircraft will not be repaired or modified without prior agreement of the CAMO or CAO.
In case of any non-conformity with this contract, by either of the signatories, the CAMO or CAO and the owner or operator shall assess if it impacts the continuation of the contract and shall inform the competent authority(ies) of such organisations. The assessment carried out by the organisations shall consider the safety significance of the non-conformity and if it is of repetitive nature. If either of the signatories concludes after this assessment that they cannot fulfil their responsibilities due to their own limitations or due to the failures of the signatory, the contract shall be cancelled and the competent authority(ies) of the organisations shall be informed immediately. In such a case, the owner or operator will retain full responsibility for every task linked to the continuing airworthiness of the aircraft, and the owner or operator will inform the competent authorities of the Member State of registry within 2 weeks about such non-conformity with the contract. In the case of contract concluded in accordance with M.A.201(ea), the competent authority of the Member State of registry shall be informed immediately.’’;
the introductory part of point 5 is replaced by the following:
‘When an owner or operator contracts a CAMO or a CAO in accordance with point M.A.201, the contract shall specify the obligations of each party as follows:’;
in point 5.1(2) point (e) is replaced by the following:
‘(e) establish and order the necessary maintenance to ensure an appropriate bridging with the former aircraft maintenance programme;’;
in point 5.1(2) point (i) is replaced by the following:
‘(i) coordinate the accomplishment of scheduled maintenance, including inspection of components, replacement of life-limited parts and the accomplishment of any applicable AD, and ensure compliance with operational requirements having a continuing airworthiness impact, continuing airworthiness requirements established by the Agency and measures required by the competent authority in immediate reaction to a safety problem;’;
in point 5.1(2) points (j), (k) and (l) are replaced by the following:
‘(j) inform the owner or operator each time the aircraft is to be brought to an approved maintenance organisation;
manage and archive the aircraft continuing airworthiness records;
coordinate with the operator or owner on any request to the relevant competent authority for any deviation from the aircraft maintenance programme;’
in point 5.1(2) the following point (m) is added:
‘(m) support the operator or pilot-owner as regards the aircraft continuing airworthiness when they conduct maintenance check flights.’;
in point 5.2, the following points 13, 14 and 15 are added:
‘13. ensure compliance with the approved maintenance programme and coordinate with the CAMO or CAO on any request to the relevant competent authority for any one-time extension to a maintenance programme interval;
inform the CAMO or CAO of any non-compliance with operational requirements that may affect the continuing airworthiness of the aircraft;
inform the CAMO or CAO of any operational requirement (e.g. specific approvals) necessary to be fulfilled in order to maintain the aircraft in the required configuration.’;
the following point 7 is added:
‘7. Additional requirements in the case of applying point M.A.201(ea)
In addition to the above-listed requirements and obligations in points 5.1 and 5.2, when a contract between the CAMO and the operator is concluded in accordance with point M.A.201(ea), the continuing airworthiness management contract shall also comply with the requirements of points 7.1 to 7.3.
Before the contract is signed, the operator shall assess the CAMO to ensure that the CAMO has the capability and capacity to comply with the contract.
7.1. Eligibility
The continuing airworthiness contract in accordance with M.A.201(ea) shall only be concluded if the air carrier concerned is licensed in accordance with Regulation (EC) No 1008/2008 and the CAMO forms part of the same air carrier business grouping. The continuing airworthiness management contract shall contain a clear description of how the conditions described in M.A.201(ea) are met. It shall in particular describe how the individual management systems of the organisations are harmonised between each other.
7.2. Additional obligations of the CAMO:
become knowledgeable about the operator’s procedure related to the monitoring of the contract;
obtain the agreement from the operator before subcontracting continuing airworthiness tasks;
inform immediately the competent authority of the Member State of registry whenever the aircraft is not presented to the approved maintenance organisation by the operator as requested by the CAMO, when the present contract is not respected or when the contract is denounced by either party;
provide training for the operator’s staff to ensure that they have an understanding of the CAMO’s:
policies and procedures, responsibilities, obligations, duties and areas of interface;
lines of communication (for example aircraft records, exchange of accurate airworthiness information in a timely manner including outside of normal working hours);
procedures pertaining specifically to the CAMO such as customised software utilisation, reliability monitoring, use of the aircraft technical log system, and interoperability provisions.
7.3. Additional obligations of the operator:
develop interface procedures with the CAMO to address the issue and renewal of the airworthiness review certificate;
in case of unexpected maintenance needs in locations where no maintenance organisation approved in accordance with Annex II (Part-145) to this Regulation is contracted, inform immediately the CAMO;
inform immediately the competent authority of the Member State of registry whenever the contract is denounced by either party;
provide training for the CAMO staff in order to ensure that they have an understanding of the operator’s:
policies and procedures, responsibilities, obligations, duties and areas of interface;
lines of communication;
procedures pertaining specifically to the operator such as operational procedures, customised software utilisation, use of the aircraft technical log system, and interoperability provisions.’.