No | Reference of the standard
|
EN 1010-1:2004+A1:2010
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 1: Common requirements
|
EN 1010-2:2006+A1:2010
Safety of machinery – Safety requirements for the design and construction of printing and paper converting machines – Part 2: Printing and varnishing machines including pre-press machinery
|
EN 1127-1:2019
Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
|
EN 1127-2:2014
Explosive atmospheres – Explosion prevention and protection – Part 2: Basic concepts and methodology for mining
|
EN 1755:2015
Industrial Trucks – Safety requirements and verification – Supplementary requirements for operation in potentially explosive atmospheres
|
EN 1834-1:2000
Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 1: Group II engines for use in flammable gas and vapour atmospheres
|
EN 1834-2:2000
Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 2: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust
|
EN 1834-3:2000
Reciprocating internal combustion engines – Safety requirements for design and construction of engines for use in potentially explosive atmospheres – Part 3: Group II engines for use in flammable dust atmospheres
|
EN 1839:2017
Determination of the explosion limits and the limiting oxygen concentration (LOC) for flammable gases and vapours
|
EN 1953:2013
Atomising and spraying equipment for coating materials – Safety requirements
|
EN 1953:2025
Application equipment for coating materials – Safety requirements
|
EN 12581:2005+A1:2010
Coating plants – Machinery for dip coating and electrodeposition of organic liquid coating material – Safety requirements
|
EN 12621:2006+A1:2010
Machinery for the supply and circulation of coating materials under pressure – Safety requirements
|
EN 12621:2025
Machinery for supply and circulation of liquid coating materials – Safety requirements
|
EN 12757-1:2005+A1:2010
Mixing machinery for coating materials – Safety requirements – Part 1: Mixing machinery for use in vehicle refinishing
|
EN 13012:2021
Petrol filling stations – Construction and performance of automatic nozzles for use on fuel dispensers
|
EN 13237:2012
Potentially explosive atmospheres – Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres
|
EN 13616-1:2016
Overfill prevention devices for static tanks for liquid fuels – Part 1: Overfill prevention devices with closure device
|
EN 13616-1:2025
Overfill prevention devices for static tanks for liquid fuels – Part 1: Overfill prevention devices with closure device
|
EN 13617-1:2021
Petrol filling stations – Part 1: Safety requirements for construction and performance of metering pumps, dispensers and remote pumping units
|
EN 13617-2:2021
Petrol filling stations – Part 2: Safety requirements for construction and performance of safe breaks for use on metering pumps and dispensers
|
EN 13617-3:2021
Petrol filling stations – Part 3: Safety requirements for construction and performance of shear valves
|
EN 13617-4:2021
Petrol filling stations – Part 4: Safety requirements for construction and performance of swivels for use on metering pumps and dispensers
|
EN 13760:2021
LPG equipment and accessories – Automotive LPG filling system for light and heavy duty vehicles – Nozzle, test requirements and dimensions
|
EN 13852-1:2013
Cranes – Offshore cranes – Part 1: General-purpose offshore cranes
|
EN 13852-1:2025
Cranes – Offshore cranes – Part 1: General-purpose offshore cranes
|
EN 13852-3:2021
Cranes – Offshore cranes – Part 3: Light offshore cranes
Notice 1: The normative references referred to in clause 2 of harmonised standard EN IEC 60079-0:2018 shall be read as EN IEC 60079-0:2018 corrected by EN IEC 60079-0:2018/AC:2020-02
Notice 2: The normative references referred to in clause 2 of harmonised standard EN ISO 80079-36:2016 shall be read as EN ISO 80079-36:2016 corrected by EN ISO 80079-36:2016/AC:2019 Restriction: this publication does not cover the following part of the standard: column ‘Remarks/Notes’ of Table ZB.1
|
EN 14034-1:2004+A1:2011
Determination of explosion characteristics of dust clouds – Part 1: Determination of the maximum explosion pressure pmax of dust clouds
|
EN 14034-2:2006+A1:2011
Determination of explosion characteristics of dust clouds – Part 2: Determination of the maximum rate of explosion pressure rise (dp/dt) max of dust clouds
|
EN 14034-3:2006+A1:2011
Determination of explosion characteristics of dust clouds – Part 3: Determination of the lower explosion limit LEL of dust clouds
|
EN 14034-4:2004+A1:2011
Determination of explosion characteristics of dust clouds – Part 4: Determination of the limiting oxygen concentration LOC of dust clouds
|
EN 14373:2021
Explosion suppression systems
|
EN 14373:2021+A1:2025
Explosion suppression systems
|
EN 14460:2018
Explosion resistant equipment
|
EN 14491:2012
Dust explosion venting protective systems
|
EN 14492-1:2006+A1:2009
Cranes – Power driven winches and hoists – Part 1: Power driven winches
EN 14492-1:2006+A1:2009/AC:2010
|
EN 14492-2:2006+A1:2009
Cranes – Power driven winches and hoists – Part 2: Power driven hoists
EN 14492-2:2006+A1:2009/AC:2010
|
EN 14522:2005
Determination of the auto ignition temperature of gases and vapours
|
EN 14591-1:2004
Explosion prevention and protection in underground mines – Protective systems – Part 1: 2-bar explosion proof ventilation structure
EN 14591-1:2004/AC:2006
|
EN 14591-2:2007
Explosion prevention and protection in underground mines – Protective systems – Part 2: Passive water trough barriers
EN 14591-2:2007/AC:2008
|
EN 14591-4:2007
Explosion prevention and protection in underground mines – Protective systems – Part 4: Automatic extinguishing systems for road headers
EN 14591-4:2007/AC:2008
|
EN 14677:2008
Safety of machinery – Secondary steelmaking – Machinery and equipment for treatment of liquid steel
|
EN 14678-1:2013
LPG equipment and accessories – Construction and performance of LPG equipment for automotive filling stations – Part 1: Dispensers
|
EN 14681:2006+A1:2010
Safety of machinery – Safety requirements for machinery and equipment for production of steel by electric arc furnaces
|
EN 14797:2006
Explosion venting devices
|
EN 14973:2015
Conveyor belts for use in underground installations – Electrical and flammability safety requirements
|
EN 14983:2007
Explosion prevention and protection in underground mines – Equipment and protective systems for firedamp drainage
|
EN 14983:2024
Explosion prevention and protection in underground mines – Equipment and protective systems for firedamp drainage
|
EN 14986:2017
Design of fans working in potentially explosive atmospheres
|
EN 14994:2007
Gas explosion venting protective systems
|
EN 15089:2009
Explosion isolation systems
|
EN 15188:2020
Determination of the spontaneous ignition behaviour of dust accumulations
|
EN 15198:2007
Methodology for the risk assessment of non-electrical equipment and components for intended use in potentially explosive atmospheres
|
EN 15233:2007
Methodology for functional safety assessment of protective systems for potentially explosive atmospheres
|
EN 15268:2008
Petrol filling stations – Safety requirements for the construction of submersible pump assemblies
|
EN 15794:2009
Determination of explosion points of flammable liquids
|
EN 15967:2022
Determination of maximum explosion pressure and the maximum rate of pressure rise of gases and vapours
|
EN 16009:2011
Flameless explosion venting devices
|
EN 16020:2011
Explosion diverters
|
EN 16447:2014
Explosion isolation flap valves
|
EN ISO 16852:2016
Flame arresters – Performance requirements, test methods and limits for use (ISO 16852:2016)
|
EN 17077:2018
Determination of burning behaviour of dust layers
|
EN 50050-1:2013
Electrostatic hand-held spraying equipment – Safety requirements – Part 1: Hand-held spraying equipment for ignitable liquid coating materials
|
EN 50050-2:2013
Electrostatic hand-held spraying equipment – Safety requirements – Part 2: Hand-held spraying equipment for ignitable coating powder
|
EN 50050-3:2013
Electrostatic hand-held spraying equipment – Safety requirements – Part 3: Hand-held spraying equipment for ignitable flock
|
EN 50104:2010
Electrical apparatus for the detection and measurement of oxygen – Performance requirements and test methods
|
EN 50104:2019
Electrical equipment for the detection and measurement of oxygen – Performance requirements and test methods
EN 50104:2019/A1:2023
|
EN 50176:2009
Stationary electrostatic application equipment for ignitable liquid coating material – Safety requirements
| EN 50176:2025 – Automatic electrostatic application system for ignitable liquid coating materials – Safety requirements
|
EN 50177:2009
Stationary electrostatic application equipment for ignitable coating powders – Safety requirements
EN 50177:2009/A1:2012
|
EN 50223:2015
Stationary electrostatic application equipment for ignitable flock material – Safety requirements
|
EN 50271:2018
Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen – Requirements and tests for apparatus using software and/or digital technologies
|
EN 50281-2-1:1998
Electrical apparatus for use in the presence of combustible dust – Part 2-1: Test methods – Methods for determining the minimum ignition temperatures of dust
EN 50281-2-1:1998/AC:1999
|
EN 50303:2000
Group I, Category M1 equipment intended to remain functional in atmospheres endangered by firedamp and/or coal dust
|
EN 50381:2004
Transportable ventilated rooms with or without an internal source of release
EN 50381:2004/AC:2005
|
EN 50495:2010
Safety devices required for the safe functioning of equipment with respect to explosion risks
|
EN IEC 60079-0:2018
Explosive atmospheres – Part 0: Equipment – General requirements (IEC 60079-0:2017)
|
EN 60079-1:2014
Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures ‘d’ (IEC 60079-1:2014)
|
EN 60079-2:2014
Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure ‘p’ (IEC 60079-2:2014)
EN 60079-2:2014/AC:2015
|
EN 60079-5:2015
Explosive atmospheres – Part 5: Equipment protection by powder filling ‘q’ (IEC 60079-5:2015)
|
EN 60079-6:2015
Explosive atmospheres – Part 6: Equipment protection by liquid immersion ‘o’ (IEC 60079-6:2015)
|
EN 60079-7:2015
Explosive atmospheres – Part 7: Equipment protection by increased safety ‘e’ (IEC 60079-7:2015)
EN IEC 60079-7:2015/A1:2018
|
EN 60079-11:2012
Explosive atmospheres – Part 11: Equipment protection by intrinsic safety ‘i’ (IEC 60079-11:2011)
|
EN 60079-15:2010
Explosive atmospheres – Part 15: Equipment protection by type of protection ‘n’ (IEC 60079-15:2010)
|
EN 60079-18:2015
Explosive atmospheres – Part 18: Equipment protection by encapsulation ‘m’ (IEC 60079-18:2014)
EN 60079-18:2015/A1:2017
|
EN 60079-20-1:2010
Explosive atmospheres – Part 20-1: Material characteristics for gas and vapour classification – Test methods and data (IEC 60079-20-1:2010)
|
EN 60079-25:2010
Explosive atmospheres – Part 25: Intrinsically safe electrical systems (IEC 60079-25:2010)
EN 60079-25:2010/AC:2013
|
EN 60079-26:2015
Explosive atmospheres – Part 26: Equipment with Equipment Protection Level (EPL) Ga (IEC 60079-26:2014)
|
EN 60079-28:2015
Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation (IEC 60079-28:2015)
|
EN IEC 60079-28:2026
Explosive atmospheres – Part 28: Protection of equipment and transmission systems using optical radiation.
|
EN 60079-29-1:2016
Explosive atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases (IEC 60079-29-1:2016, (Modified))
|
EN 60079-29-1:2016
Explosive atmospheres – Part 29-1: Gas detectors – Performance requirements of detectors for flammable gases
EN 60079-29-1:2016/A1:2022
EN 60079-29-1:2016/A11:2022
|
EN 60079-29-4:2010
Explosive atmospheres – Part 29-4: Gas detectors – Performance requirements of open path detectors for flammable gases (IEC 60079-29-4:2009, (Modified))
|
EN 60079-30-1:2017
Explosive atmospheres – Part 30-1: Electrical resistance trace heating – General and testing requirements (IEC/IEEE 60079-30-1:2015, (Modified))
|
EN 60079-31:2014
Explosive atmospheres – Part 31: Equipment dust ignition protection by enclosure ‘t’ (IEC 60079-31:2013)
|
EN 60079-35-1:2011
Explosive atmospheres – Part 35-1: Caplights for use in mines susceptible to firedamp – General requirements – Construction and testing in relation to the risk of explosion (IEC 60079-35-1:2011)
EN 60079-35-1:2011/AC:2011
|
EN ISO/IEC 80079-20-2:2016
Explosive atmospheres – Part 20-2: Material characteristics – Combustible dusts test methods (ISO/IEC 80079-20-2:2016)
EN ISO/IEC 80079-20-2:2016/AC:2017
|
EN ISO/IEC 80079-34:2011
Explosive atmospheres – Part 34: Application of quality systems for equipment manufacture (ISO/IEC 80079-34:2011)
|
EN ISO 80079-36:2016
Explosive atmospheres – Part 36: Non-electrical equipment for explosive atmospheres – Basic method and requirements (ISO 80079-36:2016)
|
EN ISO 80079-37:2016
Explosive atmospheres – Part 37: Non-electrical equipment for explosive atmospheres – Non-electrical type of protection constructional safety ‘c’, control of ignition sources ‘b’, liquid immersion ‘k’ (ISO 80079-37:2016)
|
EN ISO/IEC 80079-38:2016
Explosive atmospheres – Part 38: Equipment and components in explosive atmospheres in underground mines (ISO/IEC 80079-38:2016)
EN ISO/IEC 80079-38:2016/A1:2018
|
EN 17348:2022
Requirements for design and testing of vacuum cleaners for use in potentially explosive atmospheres