Art. 19 Regulation (EU) 2021/963

Recording of the transponder code in the identification document

In forcesince 10 Jun 2021
1.

When an injectable transponder is implanted in an equine animal in accordance with Article 11, the competent authority or delegated body shall enter the following information in the single lifetime identification document:

(a)

at least the last 15 digits of the code transmitted by the transponder and displayed by the reader following implantation, and optionally

(i)

either a self-adhesive sticker with a bar-code, provided the page of the identification document is sealed afterwards; or

(ii)

a print of the bar-code referred to in point (i) encoding at least those last 15 digits of the code transmitted by the transponder;

(b)

the signature of either the person who completed the description in Part A and the outline diagram in Part B of Section I of the model identification document for equine animals set out in Part 1 of Annex II and read the code displayed by the transponder after its implantation, or of the person reproducing this information for the purpose of issuing the identification document in accordance with the rules of the competent authority, or as applicable the delegated body, or the breed society or organisation or association referred to respectively in paragraph (2) and (3) of Article 22.

2.

Where an equine animal was previously identified with an injectable transponder which does not comply with the current ISO standards, the reading system shall be inserted in point 5 of Part A of Section I of the model identification document for equine animals set out in Part 1 of Annex II.