Test report No:
Identification.
1.1. Vehicle make:
1.2 Type
1.3 Means of identification of type if marked on the vehicle:
1.4. Location of that marking:
1.5. Manufacturer’s name and address:
1.6. If applicable, name and address of manufacturer’s representative:
1.7. Manufacturer’s formal documentation package:
Documentation reference No:
Date of original issue:
Date of latest update:
Test vehicle(s)/system(s) description
2.1. General description:
2.2. Description of all the control functions of ‘The System’, and methods of operation:
2.3. Description of the components and diagrams of the interconnections within ‘The System’:
2.4. General description:
2.5. Description of all the control functions of ‘The System’, and methods of operation:
2.6. Description of the components and diagrams of the interconnections within “The System
Manufacturer’s safety concept
3.1. Description of signal flow and operating data and their priorities:
3.2. Manufacturer’s declaration:
The manufacturer(s)…affirm(s) that the strategy chosen to achieve‘The System’, objectives will not, under non-fault conditions, prejudice the safe operation of the vehicle.
3.3. Software outline architecture and the design methods and tools used:
3.4. Explanation of design provisions built into ‘The System’ under fault conditions:
3.5. Documented analyses of the behaviour of ‘The System’ under individual hazard or fault conditions:
3.6. Description of the measures in place for environmental conditions:
3.7. Provisions for the periodic roadworthiness test of ‘The System’:
3.8. Results of ‘The System’ verification test, referred to in point 3.1.1. of Annex II to Commission Implementing Regulation (EU) 2021/646 [Commission Implementing Regulation (EU) 2021/646 of 19 April 2021 laying down rules for the application of Regulation (EU) 2019/2144 of the European Parliament and of the Council as regards uniform procedures and technical specifications for the type-approval of motor vehicles with regard to their emergency lane-keeping systems (ELKS) (OJ L 133, 20.4.2021, p. 31).].
3.9. Results of safety concept verification test, referred to in point 3.1.2. of Annex II to Implementing Regulation (EU) 2021/646.
3.10. Date of test:
3.11. This test has been carried out and the results reported in accordance with Regulation (EU) 2021/646, as last amended by Regulation (EU) 2021/646
Technical Service carrying out the test
Signed: … Date: …
3.12. Comments: