Manufacturers shall collect real-world data together with the VINs of new passenger cars and new light commercial vehicles that are registered from 1 January 2021 and that are equipped with on-board fuel and/or energy consumption monitoring devices in accordance with Article 4a of Regulation (EU) 2017/1151, unless the vehicle owner expressly refuses to make that data available to the manufacturer or its authorised dealer or authorised repairer.
Where the real-world data and the VINs are not collected by the manufacturer via direct data transfer from the vehicle, the manufacturer shall ensure that the data is collected and transmitted to it by its authorised dealer or authorised repairer each time the vehicle is brought in for service or repairs or any other intervention and data is to be read out from the on-board diagnostics serial port of the vehicle. The device or scan tool used shall be capable of reading out the data as it is recorded on the on-board fuel and/or energy consumption monitoring device. The read-out of the data shall be free of charge and not subject to any specific conditions.
The manufacturer and, where applicable, its authorised dealer or repairer, shall ensure that secure means of communication are used for the collection of the VINs.
On 1 April each year, with effect from 2022, a manufacturer shall report to the Commission any real-world data and the VINs that were collected in the preceding calendar year, as specified in Table 1 of the Annex, by uploading it to the BDR.
In the event that several records referring to the same VIN are collected by a manufacturer in the same calendar year, the real-world data to be reported shall be the record indicating the highest total distance travelled. Real-world data for a given vehicle shall be collected for a maximum period of 15 years from the date on which the data for that vehicle was first reported to the EEA.
Where a manufacturer claims that real-world data cannot be reported, or can only be reported in part, it shall make a statement to that effect to the Commission and shall provide the reasons therefore. The statement and the justification shall be uploaded to the BDR.
Paragraphs 1, 2 and 3 shall not apply to small volume manufacturers as referred to in in Article 15(11) of Regulation (EU) 2017/1151.