ANNEX 2 Format for the quality check report accompanying the data referred to in Annex 1, in accordance with Article 13(2) of Directive (EU) 2019/904 of the European Parliament and of the Council, Decision_act (EU) 2021/958

In forcesince 31 May 2021

The quality check report aims to gather information on the data compilation methods and the quality of the data submitted. The report is to allow a better understanding of the approaches taken by Member States on data collection as well as to enable data to be compared across Member States. It accompanies Member State reporting on fishing gear containing plastic placed on the market and waste fishing gear collected.

The quality check report is to evaluate the quality of data collection processes, including the scope and validation of administrative data sources and the statistical validity of survey-based approaches.

Moreover, the quality check report is to consider reasons for significant changes in reported data and ensure confidence in the accuracy of that data.

Member State: |

Organisation responsible for data submission: |

Contact email: |

Phone number: |

Reference year: |

Delivery date/version: |

Link to data publication by the Member State (if any): |

Name of institution | Key responsibilities

Add rows if needed

Data collection methods/data source |

Mandatory data

(method/source: yes/no)

Voluntary data (optional)

(method/source: yes/no)

Administrative reporting (census) | |

Surveys (census or sampling) | |

Trade statistics (e.g. using Prodcom or Comext data) | |

Extended producer responsibility (EPR) scheme | |

Gear producers/traders | |

Other (specify) | |

Indicate the number of the source of reference between brackets in cells answered ‘yes’, e.g. yes (1).

Add specific explanations in the table below for cells that were answered ‘yes’, using the reference numbers. Indicate the frequency of data collection (e.g. monthly, quarterly, annually, continuous) if available.

Ref. No | Further explanation/description

Add rows if needed

If conversion factors [A conversion factor is an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another] have been used to estimate voluntary data, specify them in the table below.

[Black shaded cells are not relevant.]

Total fishing gear containing plastic (tonnes) |

Net panels made of thick twine

(Ø >1mm)

Net panels and lines made of thin twine

(Ø≤1mm)

Other plastic-based gear or parts thereof | Non-plastic parts of gear | Buoys, floats, ropes | Total per type of material

Total (tonnes) | Mandatory value | | | | | |

Plastics total | | | | | | |

Polypropylene (PP)

Polyethylene (PE)

High molecular polyethylene (HMPE)

Nylon

Other

Mixed

Metals total | | | | | | |

Steel

Aluminium

Lead

Other metal or mixed metal

Rubber total | | | | | | |

Total per gear component | | | | | | |

Scope of the survey | Year | Statistical units | Percentage of population surveyed | Data (t) | Confidence level | Error margin | Adjustments from the survey year to the current year | Other details

Add rows for each survey made.

Add specific explanations in the table below by numbering/referencing the above cells.

No | Further explanation/description

Add rows if needed

Description of main issues affecting the accuracy of data, including errors related to sampling, coverage, measurement, processing and non-response. Description of estimates used.

No | Accuracy issue | Further explanation/description

1 | Sampling |

2 | Coverage |

3 | Measurement |

4 | Processing |

5 | Non-response |

6 | Estimates |

7 | Other (specify) |

Add rows if needed

Significant methodological changes in the calculation method for the current reference year, if any (please include in particular retrospective revisions, their nature and whether a break-flag is required for a certain year).

No | Further explanation/description

Add rows if needed

Cross-check

(yes/no)

Time-series check

(yes/no)

Audit

(yes/no)

Verification process

(yes/no)

Mandatory data | | | |

Voluntary data | | | |

Additional information about the methods, including the combination of methods used.

Detailed description of methods for verification

Mandatory data |

Voluntary data (optional) |

No | Description

Add rows if needed

No | Description

Add rows if needed

Topics to be listed below are related to data dissemination.

No | List of websites, documents, publications

List of documents related to data collection methodology, data processing and quality control.

Topic | Document exists (yes/no) | Reference to the document (title, year, web link if applicable)

Data collection | |

Data processing | |

Quality control | |

Member State: |

Organisation responsible for data submission: |

Contact email: |

Phone number: |

Reference year: |

Delivery date/version: |

Link to data publication by the Member State (if any): |

Name of institution | Key responsibilities

Add rows if needed

Data collection methods/data source |

Mandatory data

(method/source: yes/no)

Voluntary data (optional)

(method/source: yes/no)

Administrative reporting (census) | |

Surveys (census or sampling) | |

Ports | |

Extended producer responsibility (EPR) scheme | |

Gear producers/traders | |

Waste management operators | |

Other (specify) | |

Indicate the number of the source of reference between brackets in cells answered ‘yes’, e.g. yes (1).

Add specific explanations in the table below for cells that were answered ‘yes’, using the reference numbers. Indicate the frequency of data collection (e.g. monthly, quarterly, annually, continuous) if available.

Ref. No | Further explanation/description

Add rows if needed

If conversion factors [A conversion factor is an arithmetical multiplier for converting a quantity expressed in one set of units into an equivalent expressed in another.] have been used to estimate voluntary data, specify them in the table below.

[Black shaded cells are not relevant.]

Total fishing gear containing plastic (tonnes) |

Net panels made of thick twine

(Ø >1mm)

Net panels and lines made of thin twine

(Ø≤1mm)

Other plastic-based gear or parts thereof | Non-plastic parts of gear | Buoys, floats, ropes | Total per type of material

Total (tonnes) | Mandatory value | | | | | |

Plastics total | | | | | | |

Polypropylene (PP)

Polyethylene (PE)

High molecular polyethylene (HMPE)

Nylon

Other

Mixed

Metals total | | | | | | |

Steel

Aluminium

Lead

Other metal or mixed metal

Rubber total | | | | | | |

Total per gear component | | | | | | |

Scope of the survey | Year | Statistical units | Percentage of population surveyed | Data (t) | Confidence level | Error margin | Adjustments from the survey year to the current year | Other details

Add rows for each survey made.

Add specific explanations in the table below by numbering/referencing the above cells.

No | Further explanation/description

Add rows if needed

Description of main issues affecting the accuracy of data, including errors related to sampling, coverage, measurement, processing and non-response. Description of estimates used.

No | Accuracy issue | Further explanation/description

1 | Sampling |

2 | Coverage |

3 | Measurement |

4 | Processing |

5 | Non-response |

6 | Estimates |

7 | Other (specify) |

Add rows if needed

Significant methodological changes in the calculation method for the current reference year, if any (include in particular retrospective revisions, their nature and whether a break flag is required for a certain year).

No | Further explanation/description

Add rows if needed

Cross-check

(yes/no)

Time-series check

(yes/no)

Audit

(yes/no)

Verification process

(yes/no)

Mandatory data | | | |

Voluntary data | | | |

Additional information about the methods, including the combination of methods used.

Detailed description of methods for verification

Mandatory data |

Voluntary data (optional) |

No | Description

Add rows if needed

No | Description

Add rows if needed

Topics to be listed below are related to data dissemination.

No | List of websites, documents, publications

List of documents related to data collection methodology, data processing and quality control.

Topic | Document exists (yes/no) | Reference to the document (title, year, web link if applicable)

Data collection | |

Data processing | |

Quality control | |