Annexes I, III and IV are amended as follows:
Annex I is amended as follows:
the following points (6a), (6b) and (6c) are inserted:
‘(6a) “Aeronautical Information Circular (AIC)” means a notice containing information that does not qualify for the origination of a notice to air men (NOTAM) or for inclusion in the AIP, but which relates to flight safety, air navigation, technical, administrative or legislative matters;
“aeronautical information product” means aeronautical data and aeronautical information provided either as digital data sets or as a standardised presentation in paper or electronic media. Aeronautical information products include the following:
AIP, including amendments and supplements,
AIC,
aeronautical charts,
NOTAM,
digital data sets;
“Aeronautical Information Publication (AIP)” means a publication issued by or with the authority of a Member State and containing aeronautical information of a lasting character essential to air navigation;’;
the following point (15a) is inserted:
‘(15a) “contaminated runway” means a runway whose surface area (whether in isolated areas or not) within the length and width being used is covered in significant part by one or more of the substances listed under the runway surface condition descriptors’;
the following point (17a) is inserted:
‘(17a) “data set” means an identifiable collection of data;’;
the following point (18a) is inserted:
‘(18a) “dry”, in respect of runway conditions, means that the surface of the runway is free of visible moisture and not contaminated within the area intended to be used;’;
the following point (19a) is inserted:
‘(19a) “foreign object debris (FOD)” means an inanimate object within the movement area which has no operational or aeronautical function and which has the potential to be a hazard to aircraft operation;’;
the following points (24a) and (24b) are inserted:
‘(24a) “lighting system reliability” means the probability that the complete installation operates within the specified tolerances and the system is operationally usable;
“Location Indicators” means the latest effective edition of the “Location Indicators” (Doc 7910), approved and published by the International Civil Aviation Organization;’;
the following points (34a) and (34b) are inserted:
‘(34a) “notice to airmen (NOTAM)” means a notice distributed by means of telecommunication containing information concerning the establishment, condition or change in any aeronautical facility, service, procedure or hazard, the timely knowledge of which is essential to personnel concerned with flight operations;
“NOTAM code” means the code contained in the latest effective edition of the “Procedures for Air Navigation Services – ICAO Abbreviations and Codes” (PANS ABC – Doc 8400), approved and published by the International Civil Aviation Organization;’;
the following points (38a), (38b), (38c), (38d), (38e), (38f), (38g) and (38h) are inserted:
‘(38a) “runway condition assessment matrix (RCAM)” means a matrix that allows the assessment of the runway condition code (RWYCC), using associated procedures, from a set of observed runway surface conditions and pilot report of braking action;
“runway condition code (RWYCC)” means a number, to be used in the runway condition report (RCR), that describes the effect of the runway surface condition on aeroplane deceleration performance and lateral control;
“runway condition report (RCR)” means a comprehensive standardised report relating to the conditions of the runway surface and their effects on the aeroplane landing and take-off performance, described by means of runway conditions code;
“runway-end safety area (RESA)” means an area symmetrical about the runway centre line and adjacent to the end of the strip primarily intended to reduce the risk of damage to an aeroplane undershooting or overrunning the runway;
“runway-holding position” means a designated position intended to protect a runway, an obstacle limitation surface, or an Instrument Landing Systems (ILS) or Microwave Landing System (MLS) critical or sensitive area at which taxiing aircraft and vehicles must stop and hold, unless otherwise authorised by the aerodrome control tower;
“runway strip” means a defined area including the runway and stopway, if provided, intended to:
reduce the risk of damage to aircraft running off a runway;
protect aircraft flying over it during take-off or landing operations;
“runway surface condition” means a description of the condition of the runway surface used in the RCR which establishes the basis for the determination of the RWYCC for aeroplane performance purposes;’;
‘runway surface condition descriptors’ means one of the following substances on the surface of the runway:
compacted snow: snow that has been compacted into a solid mass such that aeroplane tyres, at operating pressures and loadings, will run on the surface without significant further compaction or rutting of the surface;
dry snow: snow from which a snowball cannot readily be made;
frost: ice crystals formed from airborne moisture on a surface whose temperature is at or below freezing; frost differs from ice in that frost crystals grow independently and therefore, have a more granular texture;
ice: water that has frozen or compacted snow that has transitioned into ice in cold and dry conditions;
slush: snow that is so water-saturated that water will drain from it when a handful is picked up or will splatter if stepped on forcefully;
standing water: water of depth greater than 3 mm;
wet ice: ice with water on top of it or ice that is melting;
wet snow: snow that contains enough water to be able to make a well compacted, solid snowball, but water will not squeeze out’;
the following points (41a), (41b) and (41c) are inserted:
‘(41a) “slippery wet runway” means a wet runway whose surface friction characteristics for a significant portion of it have been determined to be degraded;
“SNOWTAM” means:
with effect from 7 January 2021 until 12 August 2021, a special series NOTAM notifying the presence or removal of hazardous conditions due to snow, ice, slush or standing water associated with snow, slush and ice on the movement area, by means of a specific format;
with effect from 12 August 2021, a special series NOTAM given in a standard format, which provides a surface condition report notifying the presence or cessation of conditions due to snow, ice, slush, frost or water associated with snow, slush, ice, or frost on the movement area;
“specially prepared winter runway” means a runway with a dry frozen surface of compacted snow or ice, or both, which has been treated with sand or grit or has been mechanically treated to improve runway friction;’;
point (47) is replaced by the following:
‘(47) “terms of the certificate” means the following:
ICAO Location Indicators,
conditions to operate (VFR/IFR, day/night),
aeroplane operations on specially prepared winter runways,
runway,
declared distances,
runway types and approaches provided,
aerodrome reference code,
scope of aircraft operations with higher aerodrome reference code letter,
provision of apron management services (yes/no),
rescue and firefighting level of protection;’;
point (48) is replaced by the following:
‘(48) “visual aids” means indicators and signalling devices, markings, lights, signs and markers or combinations thereof;’;
the following point (49) is added:
‘(49) “wet runway” means a runway whose surface is covered by any visible dampness or water up to and including 3 mm deep within the area intended to be used.’;
Annex III is amended as follows:
point ADR.OR.D.007 is replaced by the following:
‘ADR.OR.D.007 Management of aeronautical data and aeronautical information
As part of its management system, the aerodrome operator shall implement and maintain a quality management system covering the following activities:
its aeronautical data activities;
its aeronautical information provision activities.
The aerodrome operator shall, as part of its management system, establish a security management system to ensure the security of operational data it receives, or produces, or otherwise employs, so that access to that operational data is restricted only to those authorised.
The security management system of the aerodrome operator shall define the following elements:
the procedures relating to data security risk assessment and mitigation, security monitoring and improvement, security reviews and lesson dissemination;
the means designed to detect security breaches and to alert personnel with appropriate security warnings;
the means of controlling the effects of security breaches and of identifying recovery action and mitigation procedures to prevent reoccurrence.
The aerodrome operator shall ensure the security clearance of its personnel with respect to aeronautical data security.
The aerodrome operator shall take the necessary measures to protect its aeronautical data against cyber security threats.’;
point ADR.OR.D.017 is replaced by the following:
‘ADR.OR.D.017 Training and proficiency check programmes
The aerodrome operator shall establish and implement a training programme for personnel involved in the operation, maintenance and management of the aerodrome, to ensure their continued competence, and that they are aware of the rules and procedures relevant to operation of the aerodrome and the relationship of their functions and tasks to the aerodrome operation as a whole.
The training referred to in point (a) shall:
include initial, recurrent, refresher and continuation training;
be appropriate to the functions and tasks for the personnel;
include the applicable operational procedures and requirements of the aerodrome, as well as driving.
The aerodrome operator shall ensure that any other personnel, including personnel of other organisations that operate or provide services at the aerodrome, allowed unescorted access to the movement area and other operational areas of the aerodrome, is adequately trained and qualified for such unescorted access.
The training referred to in point (c) shall:
include initial, recurrent, refresher and continuation training;
include the applicable operational procedures and requirements of the aerodrome, as well as driving.
The aerodrome operator shall ensure that personnel referred to in points (a) and (c) have successfully completed the necessary initial training prior to being allowed:
to perform their duties unattended;
unescorted access to the movement area and other operational areas of the aerodrome.
The initial training shall include theoretical and practical training of adequate duration and competence assessments of the personnel following the provision of the training.
In order to continue to perform their duties unattended and being allowed unescorted access to the movement area and other operational areas of the aerodrome and unless otherwise specified in this Part and Part-ADR.OPS, the aerodrome operator shall ensure that personnel referred to in points (a) and (c) have been trained on the rules and procedures relevant to operation of the aerodrome by successfully completing:
recurrent training, at intervals not exceeding 24 months since the completion of their initial training. If the recurrent training is undertaken within the last 3 calendar months of the interval, the new interval period shall be counted from the expiry date of the original interval;
refresher training, prior to performing their duties unattended or being allowed unescorted access to the movement area or other operational area of the aerodrome, when they are absent from their duties for a period not less than 3 and not more than 12 consecutive months. In case of absence beyond 12 consecutive months, such personnel shall undergo initial training in accordance with point (c);
continuation training due to changes to their operating environment or assigned tasks, as necessary.
The aerodrome operator shall establish and implement a proficiency check programme for personnel referred to in point (a), and ensure for personnel referred to in point (c) that they have demonstrated their capabilities in the performance of their tasks, in accordance with a proficiency check programme, in order to ensure:
their continued competence;
that they are aware of the rules and procedures relevant to their functions and tasks.
Unless otherwise specified in this Part and Part-ADR.OPS, the aerodrome operator shall ensure that persons referred to in points (a) and (c) undergo proficiency checks at intervals not exceeding 24 months since the completion of their initial training.
The aerodrome operator shall ensure that:
adequately qualified and experienced instructors for the provision of training and assessors for the assessments and the proficiency checks are used;
suitable facilities, means and equipment are used for the provision of the training and, where applicable, for the conduct of the proficiency checks.
The aerodrome operator shall establish and implement procedures for the implementation of the training and proficiency check programmes and shall:
maintain appropriate qualification, training and proficiency check records to demonstrate compliance with this requirement;
upon request, make such records available to its personnel concerned;
if a person is employed by another employer, upon request, make such records of that person available to that new employer.’;
point ADR.OR.D.035(d) is amended as follows:
point (6) is replaced by the following:
‘(6) the current version of the hazard register;’;
the following points (7) and (8) are added:
‘(7) driving authorisations and, if appropriate, language proficiency certificates, for at least four years after the end of a person’s employment, or the revocation or cancelation of a driving authorisation, or until this area of activity has been audited by the competent authority;
vehicle authorisations and aerodrome operator’s vehicle maintenance records, for at least four years after a vehicle is removed from operations, or until this area has been audited by the competent authority.’;
Annex IV is amended as follows:
point ADR.OPS.A.010 is replaced by the following:
‘ADR.OPS.A.010 Data quality requirements
The aerodrome operator shall have formal arrangements with the organisations with which it exchanges aeronautical data or aeronautical information and shall ensure the following:
all data relevant to the aerodrome and available services is provided with the required quality; data quality requirements (DQRs) are complied with at data origination and maintained during data transmission;
the accuracy of aeronautical data is as specified in the aeronautical data catalogue;
the integrity of aeronautical data is maintained throughout the data process from origination to transmission, based on the integrity classification specified in the aeronautical data catalogue. In addition, procedures shall be put in place so that:
for routine data, corruption is avoided throughout the processing of the data;
for essential data, corruption does not occur at any stage of the entire process and additional processes are included, as needed, to address potential risks in the overall system architecture to ensure data integrity at that level;
for critical data, corruption does not occur at any stage of the entire process and additional integrity assurance processes are included to fully mitigate the effects of faults identified by thorough analysis of the overall system architecture as potential data integrity risks;
the resolution of the aeronautical data is commensurate with the actual data accuracy;
the traceability of the aeronautical data;
the timeliness of the aeronautical data, including any limits on the effective period;
the completeness of the aeronautical data;
the format of the delivered data meets the specified requirements.’;
the following points ADR.OPS.A.020 to ADR.OPS.A.055 are added:
‘ADR.OPS.A.020 Common reference systems
For the purpose of air navigation, the aerodrome operator shall use:
the World Geodetic System – 1984 (WGS-84) as the horizontal reference system;
the mean sea level (MSL) datum as the vertical reference system;
the Gregorian calendar and coordinated universal time (UTC) as the temporal reference systems.
ADR.OPS.A.025 Data error detection and authentication
When originating, processing or transmitting data to the aeronautical information service (AIS) provider, the aerodrome operator shall:
ensure that digital data error detection techniques are used during the transmission and storage of aeronautical data, in order to support the applicable data integrity levels;
ensure that the transfer of aeronautical data is subject to a suitable authentication process such that recipients are able to confirm that the data or information has been transmitted by an authorised source.
ADR.OPS.A.030 Aeronautical data catalogue
When originating, processing or transmitting data to the AIS provider, the aerodrome operator shall ensure that the aeronautical data referred to in Appendix 1 to Annex III (Part-ATM/ANS.OR) to Commission Implementing Regulation (EU) 2017/373 [Commission Implementing Regulation (EU) 2017/373 of 1 March 2017 laying down common requirements for providers of air traffic management/air navigation services and other air traffic management network functions and their oversight, repealing Regulation (EC) No 482/2008, Implementing Regulations (EU) No 1034/2011, (EU) No 1035/2011 and (EU) 2016/1377 and amending Regulation (EU) No 677/2011 (OJ L 62, 8.3.2017, p. 1).’;] conform to the data catalogue specifications.
ADR.OPS.A.035 Data validation and verification
When originating, processing or transmitting data to the AIS provider, the aerodrome operator shall ensure that validation and verification techniques are employed so that the aeronautical data meets the associated DQRs. In addition:
the verification shall ensure that the aeronautical data is received without corruption and that the aeronautical data process does not introduce corruption;
aeronautical data and aeronautical information entered manually shall be subject to independent verification to detect any errors that may have been introduced;
when using aeronautical data to obtain or calculate new aeronautical data, the initial data shall be verified and validated, except when provided by an authoritative source.
ADR.OPS.A.040 Error handling requirements
The aerodrome operator shall ensure that:
errors identified during data origination and after data delivery are addressed, corrected or resolved;
priority is given to managing errors in critical and essential aeronautical data.
ADR.OPS.A.045 Metadata
The aerodrome operator shall ensure that metadata include, as a minimum:
the identification of the organisations or entities performing any action of originating, transmitting or manipulating the aeronautical data;
the action performed;
the date and time the action was performed.
ADR.OPS.A.050 Data transmission
The aerodrome operator shall ensure that aeronautical data is transmitted by electronic means.
ADR.OPS.A.055 Tools and software
When originating, processing or transmitting aeronautical data to the AIS provider, the aerodrome operator shall ensure that tools and software used to support or automate aeronautical data processes perform their functions without adversely impacting the quality of the aeronautical data.
the following point ADR.OPS.A.057 is added:
‘ADR.OPS.A.057 Origination of NOTAM
The aerodrome operator shall:
establish and implement procedures in accordance with which it originates a NOTAM issued by the relevant aeronautical information services provider:
that contains information on the establishment, condition, or change of any aeronautical facility, service, procedure or hazard, the timely knowledge of which is essential to personnel involved with flight operations;
that contains information of a temporary nature and of short duration or that concerns operationally significant permanent changes or temporary changes of long duration that are made at short notice, except for extensive text or graphics, or both;
designate aerodrome personnel, who have successfully completed relevant training and demonstrated their competence, to originate NOTAM and provide relevant information to the aeronautical information service providers with which it has arrangements;
ensure that all other aerodrome personnel whose duties involve the use of NOTAM have successfully completed relevant training and demonstrated their competence to do so.
The aerodrome operator shall originate a NOTAM when it is necessary to provide the following information:
establishment of, closure of, or significant changes in the operation of aerodromes or heliports or runways;
establishment of, withdrawal of, or significant changes in the operation of the aerodrome services;
establishment of, withdrawal of, or significant changes in the operational capability of radio navigation and air-ground communication services for which the aerodrome operator is responsible;
unavailability of backup and secondary systems, having a direct operational impact;
establishment of, withdrawal of, or significant changes to visual aids;
interruption of, or return to operation of, major components of aerodrome lighting systems;
establishment of, withdrawal of, or significant changes to procedures for air navigation services for which the aerodrome operator is responsible;
occurrence or correction of major defects or impediments in the manoeuvring area;
changes to, and limitations on, the availability of fuel, oil and oxygen;
establishment of, withdrawal of, or return to, operation of hazard beacons marking obstacles to air navigation;
planned laser emissions, laser displays and search lights in the aerodrome surroundings, if pilots’ night vision is likely to be impaired;
erecting or removal of, or changes to, obstacles to air navigation in the takeoff, climb, missed approach, approach areas, as well as on the runway strip;
changes in aerodrome or heliport rescue and firefighting category;
presence of, removal of, or significant changes in, hazardous conditions due to snow, slush, ice, radioactive material, toxic chemicals, volcanic ash deposition or water on the movement area;
presence of a runway or portion thereof which is slippery wet;