2 Appendix 1 for standard scenarios supporting a declaration, Regulation (EU) 2020/639

In forcesince 12 May 2020
(1)

During flight, the unmanned aircraft shall be maintained within 120 m from the closest point of the surface of the earth. The measurement of distances shall be adapted accordingly to the geographical characteristics of the terrain, such as plains, hills, mountains.

(2)

When flying an unmanned aircraft within a horizontal distance of 50 m from an artificial obstacle taller than 105 metres, the maximum height of the UAS operation may be increased up to 15 m above the height of the obstacle at the request of the entity responsible for the obstacle.

(3)

The maximum height of the operational volume shall not exceed 30 m above the maximum height allowed in points (1) and (2).

(4)

During flight, the unmanned aircraft shall not carry dangerous goods.

(1)

UAS operations in STS-01 shall meet all of the following conditions:

(a)

be conducted with the unmanned aircraft kept in VLOS at all times;

(b)

be conducted in accordance with the operations manual referred to in point (1) of point UAS.STS-01.030;

(c)

be conducted over a controlled ground area comprising:

(i)

for the operation of an untethered unmanned aircraft:

(A) the flight geography area;

(B) the contingency area, with its external limit(s) at least 10 m beyond the limit(s) of the flight geography area; and

(C) the ground risk buffer, which shall cover a distance beyond the external limit(s) of the contingency area that meets at least the following parameters:

Minimum distance to be covered by the ground risk buffer for untethered unmanned aircraft

Maximum height above ground | with an MTOM up to 10 kg | with an MTOM above 10 kg

30 m | 10 m | 20 m

60 m | 15 m | 30 m

90 m | 20 m | 45 m

120 m | 25 m | 60 m

(ii)

for operation of a tethered unmanned aircraft, a radius equal to the tether length plus 5 m and centred on the point where the tether is fixed over the surface of the earth.

(d)

be conducted at a ground speed of less than 5 m/s in the case of untethered unmanned aircraft;

(e)

be conducted by a remote pilot who:

(i)

holds a certificate of remote pilot theoretical knowledge in accordance with Attachment A to this Chapter for operations in the standard scenarios issued by the competent authority or by an entity designated by the competent authority of a Member State;

(ii)

holds an accreditation of completion of the STS-01 practical skill training, in accordance with Attachment A to this Chapter and issued by:

(A) an entity that has declared compliance with the requirements in Appendix 3 and is recognised by the competent authority of a Member State; or

(B) an UAS operator that has declared to the competent authority of the Member State of registration, compliance with STS-01 and that has declared compliance with the requirements in Appendix 3; and

(f)

be conducted with an unmanned aircraft which is marked as class C5 and complies with the requirements of that class, as defined in Part 16 of the Annex to Delegated Regulation (EU) 2019/945, and is operated with active and updated direct remote identification system.

(2)

The remote pilot shall obtain the certificate of theoretical knowledge for operations in the standard scenarios after:

(a)

having completed an online training course and passed the online theoretical knowledge examination as referred to in point (4)(b) of point UAS.OPEN.020; and

(b)

having passed an additional theoretical knowledge examination provided by the competent authority or by an entity designated by the competent authority of a Member State in accordance with Attachment A to this Chapter.

(3)

This certificate shall be valid for five years. The revalidation, within its validity period is subject to any of the following:

(a)

the demonstration of competencies in accordance with point (2);

(b)

the completion of a refresher training addressing the theoretical knowledge subjects as defined in point (2) provided by the competent authority or by an entity designated by the competent authority.

(4)

In order to revalidate the certificate upon its expiration, the remote pilot shall comply with point (2).

In addition to the responsibilities defined in UAS.SPEC.050, the UAS operator shall:

(1)

develop an operations manual including the elements defined in Appendix 5;

(2)

define the operational volume and ground risk buffer for the intended operations, including the controlled ground area covering the projections on the surface of the earth within both the volume and the buffer;

(3)

ensure the adequacy of the contingency and emergency procedures through any of the following:

(a)

dedicated flight tests;

(b)

simulations, provided that the representativeness of the simulation means is appropriate for the intended purpose;

(4)

develop an effective emergency response plan (ERP) suitable for the operation that includes at least:

(a)

the plan to limit any escalating effects of the emergency situation;

(b)

the conditions to alert the relevant authorities and organisations;

(c)

the criteria to identify an emergency situation;

(d)

clear delineation of the duties of the remote pilot(s) and any other personnel in charge of duties essential to the UAS operation;

(5)

ensure that the level of performance for any externally provided service necessary for the safety of the flight is adequate for the intended operation;

(6)

define the allocation of the roles and responsibilities between the operator and the external service provider(s), if applicable;

(7)

upload updated information into the geo-awareness, if the function is installed on the UAS, when required by the UAS geographical zone for the intended location of operation;

(8)

ensure that, before starting the operation, the controlled ground area is in place, effective and compliant with the minimum distance defined in point UAS.STS-01.020(1)(C)(i)(C) and, when required, coordination with the appropriate authorities has been conducted;

(9)

ensure that, before starting the operation, all persons present in the controlled ground area:

(a)

have been informed of the risks of the operation;

(b)

have been briefed or trained, as appropriate, on the safety precautions and measures established by the UAS operator for their protection; and

(c)

have explicitly agreed to participate in the operation;

(10)

ensure that:

(a)

the UAS is accompanied by the corresponding EU declaration(s) of conformity, including the reference to class C5 or reference to class C3 and to the accessories kit; and

(b)

the class C5 identification label is affixed to the unmanned aircraft or to the accessories kit.

In addition to the responsibilities defined in UAS.SPEC.060, the remote pilot:

(1)

before starting an UAS operation, shall verify that the means to terminate the flight of the unmanned aircraft are operational and check if the direct remote identification is active and up-to-date;

(2)

during the flight:

(a)

shall keep the unmanned aircraft in VLOS and maintain a thorough airspace scan of the airspace surrounding the unmanned aircraft in order to avoid any risk of a collision with any manned aircraft. The remote pilot shall discontinue the flight if the operation poses a risk to other aircraft, people, animals, environment or property;

(b)

for the purposes of point (a), may be assisted by an unmanned aircraft observer. In such case, clear and effective communication shall be established between the remote pilot and the unmanned aircraft observer;

(c)

shall have the ability to maintain control of the unmanned aircraft, except in the case of a lost command and control (C2) link;

(d)

shall operate only one unmanned aircraft at a time;

(e)

shall not operate the unmanned aircraft from a moving vehicle;

(f)

shall not hand over the control of the unmanned aircraft to another command unit;

(g)

shall perform the contingency procedures defined by the UAS operator for abnormal situations, including when the remote pilot has an indication that the unmanned aircraft may exceed the limits of the flight geography; and

(h)

shall perform the emergency procedures defined by the UAS operator for emergency situations, including triggering the means to terminate the flight when the remote pilot has an indication that the unmanned aircraft may exceed the limits of the operational volume.

(a)

The examination referred in point (2)(b) of point UAS.STS-01.020 shall comprise at least 40 multiple-choice questions aimed at assessing the remote pilot’s knowledge of the technical and operational mitigations, distributed appropriately across the following subjects:

(i)

aviation regulations;

(ii)

human performance limitations;

(iii)

operational procedures;

(iv)

technical and operational mitigations for ground risk;

(v)

UAS general knowledge;

(vi)

meteorology;

(vii)

the flight performance of the UAS; and

(viii)

technical and operational mitigations for air risks.

(b)

If the student remote pilot already holds a certificate of remote pilot competency as referred to in point (2) of point UAS.OPEN.030, the examination shall comprise at least 30 multiple-choice questions distributed appropriately across the subjects in points (1)(a)(i) to (1)(a)(v).

(c)

To pass the theoretical knowledge examination, the remote pilot student shall achieve at least 75 % of the overall marks.

The training and assessment of the practical skill for operations under any standard scenario shall cover at least the subjects and areas identified in Table 1:

Subject | Areas to be covered

(a)

Pre-flight actions

(i)

Operation planning, airspace considerations and site risk assessment. The following points are to be included:

(A) identify the objectives of the intended operation;

(B) make sure that the defined operational volume and relevant buffers (e.g. ground risk buffer) are suitable for the intended operation;

(C) spot the obstacles in the operational volume that could hinder the intended operation;

(D) identify whether the wind speed and/or direction may be affected by topography or by obstacles in the operational volume;

(E) select relevant data on airspace information (including on UAS geographical zones) that can have an impact on the intended operation;

(F) make sure the UAS is suitable for the intended operation;

(G) make sure that the selected payload is compatible with the UAS used for the operation;

(H) implement the necessary measures to comply with the limitations and conditions applicable to the operational volume and ground risk buffer for the intended operation in accordance with the operations manual procedures for the relevant scenario;

(I) implement the necessary procedures to operate in controlled airspace, including a protocol to communicate with ATC and obtain clearance and instructions, if necessary;

(J) confirm that all the necessary documents for the intended operation are on site; and

(K) brief all participants about the planned operation.

(ii)

UAS pre-flight inspection and set-up (including flight modes and power-source hazards). The following points are to be included:

(A) assess the general condition of the UAS;

(B) ensure that all the removable components of the UAS are properly secured;

(C) make sure that the UAS software configurations are compatible;

(D) calibrate the instruments in the UAS;

(E) identify any flaw that may jeopardise the intended operation;

(F) make sure that the energy level of the battery is sufficient for the intended operation;

(G) make sure that the flight termination system of the UAS and its triggering system are operational;

(H) check the correct functioning of the command and control link;

(I) activate the geo-awareness function and upload the information to it (if geo-awareness function is available); and

(J) set the height and speed limitation systems (if available).

(iii)

Knowledge of the basic actions to be taken in the event of an emergency situation, including issues with the UAS, or if a mid-air collision hazard arises during the flight.

(b)

In-flight procedures

(i)

Maintain an effective look-out and keep the unmanned aircraft within visual line of sight (VLOS) at all times to include: situational awareness of the location in relation to the operational volume and other airspace users, obstacles, terrain and persons who are not involved at all times.

(ii)

Perform accurate and controlled flight manoeuvres at different heights and distances representative of the corresponding STS (including flight in manual/non-GNSS assisted mode or the equivalent, where fitted). At least the following manoeuvres shall be performed:

(A) hover in position (only for rotorcraft);

(B) transition from hover into forward flight (only for rotorcraft);

(C) climb and descent from level flight;

(D) turns in level flight;

(E) speed control in level flight;

(F) actions after a failure of a motor/ propulsion system; and

(G) evasive action (manoeuvres) to avoid collisions

(iii)

Real-time monitoring of the UAS status and endurance limitations.

Flight under abnormal conditions:

(A) manage a partial or complete power shortage of the unmanned aircraft propulsion system while ensuring the safety of third parties on the ground;

(B) manage the path of the unmanned aircraft in abnormal situations;

(C) manage a situation in which the unmanned aircraft positioning equipment is impaired;

(D) manage a situation of an incursion by a person not involved into the operational volume or the controlled ground area, and take appropriate measures to maintain safety;

(E) react to, and take the appropriate corrective actions for a situations where the unmanned aircraft is likely to exceed the limit of the flight geography (contingency procedures) and from the operational volume (emergency procedures) as defined during the flight preparation;

(F) manage the situation when an aircraft approaches the operational volume; and

(G) demonstrate the recovery method following a deliberate (simulated) loss of the command and control link.

(c)

Post-flight actions

(i)

Shut down and secure the UAS.

(ii)

Post-flight inspection and recording of any relevant data relating to the general condition of the UAS (its systems, components and power sources) and crew fatigue.

(iii)

Conduct a debriefing about the operation.

(iv)

Identify situations when an occurrence report was necessary and complete the required occurrence report.

(1)

During flight, the unmanned aircraft shall be maintained within 120 m from the closest point of the surface of the earth. The measurement of distances shall be adapted according to the geographical characteristics of the terrain, such as plains, hills, mountains.

(2)

When flying an unmanned aircraft within a horizontal distance of 50 m from an artificial obstacle taller than 105 m, the maximum height of the UAS operation may be increased up to 15 m above the height of the obstacle at the request of the entity responsible for the obstacle.

(3)

The maximum height of the operational volume shall not exceed 30 m above the maximum height allowed in points (1) and (2).

(4)

During flight, the unmanned aircraft shall not carry dangerous goods.

UAS operations in STS-02 shall be conducted:

(1)

in accordance with the operations manual referred to in point (1) of point UAS.STS-02.030;

(2)

over a controlled ground area entirely located in a sparsely populated environment including:

(a)

the flight geography area,

(b)

the contingency, which its external limit(s) shall be located at least 10 m beyond the limit(s) of the flight geography area,

(c)

a ground risk buffer covering a distance that is at least equal to the distance most likely to be travelled by the UA after activation of the means to terminate the flight specified by the UAS manufacturer in manufacturer’s instructions, considering the operational conditions within the limitations specified by the UAS manufacturer;

(3)

in an area where the minimum flight visibility is more than 5 km;

(4)

with the unmanned aircraft in sight of the remote pilot during the launch and recovery of the unmanned aircraft, unless the latter is the result of an emergency flight termination;

(5)

if no airspace observer is used in the operation, with the unmanned aircraft flying no further than 1 km from the remote pilot, with the unmanned aircraft following a pre-programmed trajectory when the unmanned aircraft is not in VLOS of the remote pilot;

(6)

if one or more airspace observers are used in the operation, it shall comply with all of the following conditions:

(a)

the airspace observer(s) are positioned in a manner allowing for an adequate coverage of the operational volume and the surrounding airspace with the minimum flight visibility indicated in point (3);

(b)

the unmanned aircraft is operated no further than 2 km from the remote pilot;

(c)

the unmanned aircraft is operated no further than 1 km from the airspace observer who is nearest to the unmanned aircraft;

(d)

the distance between any airspace observer and the remote pilot is not more than 1 km;

(e)

robust and effective communication means are available for the communication between the remote pilot and the airspace observer(s);

(7)

by a remote pilot who holds:

(a)

a certificate of remote pilot theoretical knowledge for operations in standard scenarios, issued by the competent authority or by an entity designated by the competent authority of a Member State;

(b)

an accreditation of completion of the STS-02 practical skill training, in accordance with Attachment A to this Chapter and issued by:

(A) an entity that has declared compliance with the requirements in Appendix 3 and is recognised by the competent authority of a Member State; or

(B) by an UAS operator that has declared to the competent authority of the Member State of registration, compliance with STS-02 and that has declared compliance with the requirements in Appendix 3;

(8)

with an unmanned aircraft which complies with all of the following conditions:

(a)

is marked as class C6 and complies with the requirements of that class, as defined in Part 17 of the Annex to Delegated Regulation (EU) 2019/945;

(b)

is operated with an active system to prevent the unmanned aircraft from breaching the flight geography;

(c)

is operated with active and updated direct remote identification system.

(9)

The remote pilot shall obtain the certificate of theoretical knowledge for operations in the standard scenarios after:

(a)

having completed an online training course and passed the online theoretical knowledge examination as referred to in point (4)(b) of point UAS.OPEN.020; and

(b)

having passed an additional theoretical knowledge examination provided by the competent authority or by an entity designated by the competent authority of a Member State in accordance with Attachment A to this Chapter.

(10)

This certificate shall be valid for five years. The revalidation, within its validity period is subject to any of the following:

(a)

the demonstration of competencies in accordance with point (9);

(b)

the completion of a refresher training addressing the theoretical knowledge subjects as defined in point (9) provided by the competent authority or by an entity designated by the competent authority;

(11)

In order to revalidate the certificate upon its expiration, the remote pilot shall comply with point (9).

In addition to the responsibilities defined in UAS.SPEC.050, the UAS operator shall:

(1)

develop an operations manual including the elements defined in Appendix 5;

(2)

define the operational volume and ground risk buffer for the intended operations, including the controlled ground area covering the projections on the surface of the earth of both the volume and the buffer;

(3)

ensure the adequacy of the contingency and emergency procedures through any of the following:

(a)

dedicated flight tests;

(b)

simulations, provided that the representativeness of the simulation means is appropriate for the intended purpose;

(4)

develop an effective emergency response plan (ERP) suitable for the operation that includes at least:

(a)

the plan to limit the escalating effects of the emergency situation;

(b)

the conditions to alert the relevant authorities and organisations;

(c)

the criteria to identify an emergency situation;

(d)

clear delineation of the duties of the remote pilot(s) and any other personnel in charge of duties essential to the UAS operation;

(5)

ensure that the level of performance for any externally provided service necessary for the safety of the flight is adequate for the intended operation;

(6)

define the allocation of the roles and responsibilities between the operator and the external service provider(s), if applicable;

(7)

upload updated information into the geo-awareness, if the function is installed on the UAS, when required by the UAS geographical zone for the intended location of the operation;

(8)

ensure that, before starting the operation, all appropriate measures to reduce the risk of intrusion of uninvolved persons in the controlled ground area compliant with the minimum distance defined in point UAS.STS-02.020(2) have been taken and, when required, coordination with the appropriate authorities has been conducted;

(9)

ensure that, before starting the operation, all persons present in the controlled ground area:

(a)

have been informed of the risks of the operation;

(b)

have been briefed and, if applicable, trained on the safety precautions and measures established by the UAS operator for their protection; and

(c)

have explicitly agreed to participate in the operation;

(10)

before starting the operation, if airspace observers are used:

(a)

ensure the correct placement and number of airspace observers along the intended flight path;

(b)

verify:

(i)

that the visibility and the planned distance of the airspace observer are within acceptable limits as defined in the operations manual;

(ii)

the absence of potential terrain obstructions for each airspace observer;

(iii)

that there are no gaps between the zones covered by each of the airspace observers;

(iv)

that the communication with each airspace observer is established and effective;

(v)

that if means are used by the airspace observers to determine the position of the unmanned aircraft, those means are functioning and effective;

(c)

ensure that the airspace observers have been briefed on the intended path of the unmanned aircraft and the associated timing;

(11)

ensure that:

(a)

the UAS is accompanied by the corresponding EU declaration of conformity, including the reference to class C6;

(b)

the class C6 identification label is affixed to the unmanned aircraft.

In addition to the responsibilities defined in UAS.SPEC.060, the remote pilot shall:

(1)

before starting an UAS operation:

(a)

set the programmable flight volume of the unmanned aircraft to keep it within the flight geography;

(b)

verify that the means to terminate the flight and the programmable operational volume functionality of the unmanned aircraft are operational; and, check if the direct remote identification is active and up-to-date.

(2)

during flight:

This article is long: the rest is at the official publication.