[Further details on the identity and the specification of the active substance are provided in the review report.]
Common Name,
Identification Numbers
IUPAC Name | Purity | Date of approval | Expiration of approval | Specific provisions
Metalaxyl-M
CAS No 70630-17-0 (R)
CIPAC No 580
methyl N-(methoxyacetyl)-N-(2,6-xylyl)-D-alaninate |
≥ 920 g/kg
The following impurities are of toxicological concern and must not exceed the following levels in the technical material:
2,6-dimethylphenylamine:
max. content ≤ 0,5 g/kg
4-methoxy-5-methyl-5H-[1,2]oxathiole 2,2-dioxide:
max. content ≤ 1 g/kg
2-[(2,6-dimethyl-phenyl)-(2-methoxyacetyl)-amino]-propionic acid 1-methoxycarbonyl-ethyl ester:
max. content < 10 g/kg
1 June 2020 | 31 May 2035 |
When used for seed treatment where treated seeds are to be sown outdoors, Member States shall, impose appropriate restrictions concerning the sowing density and require the use of precision drilling equipment. A sowing density above 2000000 seeds/ha shall not be exceeded unless the outcome of the risk assessment undertaken for the specific uses for which authorisation is applied for demonstrates that a higher rate does not lead to any unacceptable effects on birds and mammals.
For the implementation of the uniform principles, as referred to in Article 29(6) of Regulation (EC) No 1107/2009, the conclusions of the review report on metalaxyl-M, and in particular Appendices I and II thereto, shall be taken into account.
In this overall assessment Member States shall pay particular attention to:
the specification of the technical material as commercially manufactured;
the protection of operators and workers, ensuring that the conditions of use prescribe the use of adequate personal protective equipment, where appropriate;
the protection of groundwater, when the substance is applied in regions with vulnerable soil and/or climatic conditions;
the protection of non-target arthropods, birds and mammals.
Conditions of use shall include risk mitigation measures, where appropriate.
The applicant shall submit to the Commission, the Member States and the Authority confirmatory information as regards the effect of water treatment processes on the nature of residues present in drinking water, by 10 July 2026.