Recital 1, Regulation (EU) 2020/387

In forcesince 9 Mar 2020

Pursuant to Article 54(2) and (3) of Directive (EU) 2016/797, vehicles authorised for placing in service prior to 15 June 2016 are to receive a new authorization for placing on the market in accordance with Article 21 of that Directive before they can be operated on one or more networks which are not already covered by their initial authorisation. Such vehicles are thus required either to conform to the technical specifications for interoperability (TSIs) in force or be entitled not to apply those TSIs pursuant to Article 7(1) of that Directive. At the same time, one of the objectives of Directive (EU) 2016/797 is the streamlining and harmonisation of authorisation procedures at Union level to facilitate the free movement of vehicles. To this end, clause 7.6.1 of the Annex to Commission Regulation (EU) No 321/2013 [Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem ‘rolling stock – freight wagons’ of the rail system in the European Union and repealing Decision 2006/861/EC (OJ L 104, 12.4.2013, p. 1).] and clause 7.5.2.3 of the Annex to Commission Regulation (EU) No 1302/2014 [Commission Regulation (EU) No 1302/2014 of 18 November 2014 concerning a technical specification for interoperability relating to the ‘rolling stock – locomotives and passenger rolling stock’ subsystem of the rail system in the European Union (OJ L 356, 12.12.2014, p. 228).] call for the development of flexibility provisions with regards to compliance with the TSI requirements. Those provisions are to set out which level of flexibility could be granted in case of extension of the area of use of vehicles placed in service before 15 June 2016, while fulfilling the essential requirements, maintaining the appropriate safety level, and where reasonably practicable, improving it. Those Regulations should therefore be amended accordingly. The provision related to ‘extension of area of use’ also covers the case of vehicles needing modifications to ensure technical compatibility with the new network(s); in such case, the unchanged parts of the vehicle remain validated under the previous authorisation. Restrictions and limitations of previous authorisation continue to apply. For the same reasons, such clarification should also be provided for Commission Regulation (EU) 2016/919 [Commission Regulation (EU) 2016/919 of 27 May 2016 on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union (OJ L 158, 15.6.2016, p. 1).].