Recital 12, Decision_act (EU) 2020/1232

In forcesince 27 Aug 2020

With regard to the addition to the testing methodology of a run-in procedure for the motor-generator, neither the application nor the request set out with sufficient precision the details for how such run-ins should be performed nor how the run-in effect should be taken into account. Moreover, it is already integral to the testing methodology set out in Implementing Decision (EU) 2017/785 that such effects may be taken into account, where necessary, by the requirement that the efficiency of the generator function of the motor-generator must be measured at least five times. As the efficiency of the generator function of the motor-generator is determined on the basis of the average of the measurement results, any run-in effects, positive or negative, may therefore be adequately taken into account in the final efficiency determination, where necessary by increasing the number of measurements. Against that background, it is not appropriate to complement the testing methodology with an additional specific run-in procedure such as that proposed in the application and the request.

  • celex=32017D0785
  • num:eu=2017/785