The Commission Communication on the circular economy [Communication from the Commission to the European Parliament, the Council, the European Economic Social Committee and the Committee of the Regions: Closing the loop — An EU action plan for the Circular Economy (COM(2015) 614 final of 2.12.2015).] and the Communication on the ecodesign working plan [Communication from the Commission: Ecodesign Working Plan 2016-2019 (COM(2016) 773 final of 30.11.2016).] underline the importance of using the ecodesign framework to support the move towards a more resource efficient and circular economy. Recital (11) and Article 4 of Directive 2012/19/EU of the European Parliament and of the Council [Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197, 24.7.2012, p. 38).] refer as well to Directive 2009/125/EC and indicate that ecodesign requirements should facilitate the re-use, dismantling and recovery of waste electrical and electronic equipment (WEEE) by tackling the issues upstream, thus facilitating the objectives of waste prevention and recovery in Member States as from Directive (EU) 2018/851 of the European Parliament and of the Council [Directive (EU) 2018/851 of the European Parliament and of the Council of 30 May 2018 amending Directive 2008/98/EC on waste (OJ L 150, 14.6.2018, p. 109).]. In addition, Decision No 1386/2013/EU of the European Parliament and of the Council [Decision No 1386/2013/EU of the European Parliament and of the Council of 20 November 2013 on a General Union Environment Action Programme to 2020 ‘Living well, within the limits of our planet’ (OJ L 354, 28.12.2013, p. 171).] on a General Union Environment Action Programme to 2020 includes the goal ‘to turn the Union into a resource-efficient, green and competitive low-carbon economy’. Implementable and enforceable requirements at the product design phase may be appropriate for optimising resource and material efficiency at end of life. Finally, in accordance with the Union action plan for the Circular Economy [COM(2015) 614 final.], the Commission should make sure that special emphasis is placed on aspects relevant to the circular economy when setting out or revising ecodesign criteria. This Regulation should therefore lay down appropriate non-energy related requirements contributing to circular economy objectives including requirements to facilitate repair and the availability of spare parts.
Recital 11, Regulation (EU) 2019/2021
In forcesince 1 Oct 2019
- num:eu=2009/125 (several documents carry this name)
- num:eu=2012/19 (several documents carry this name)