To positively select any option, please tick or mark the relevant box with a cross (X).
Only one of the options may be selected in boxes I.18, I.20.
Select among points II.2.1, II.2.2, II.2.3 and II.2.4, the point(s) corresponding to the category of product and the hazard(s) for which the certification is given.
Unless otherwise indicated, all boxes are compulsory.
If the consignee, the entry border control post (BCP) or the transport details (that is to say, the means and date) change after the certificate has been issued, the operator responsible for the consignment must advise the competent authority of the Member State of entry. Such a change shall not result in a request for a replacement certificate.
In case the certificate is submitted in the information management system for official controls (IMSOC), the following applies:
the statements which are not relevant are crossed out.
the entries or boxes specified in Part I constitute the data dictionaries for the electronic version of the official certificate;
the sequences of boxes in Part I of the model official certificate and the size and shape of those boxes are indicative;
where a stamp is required, its electronic equivalent is an electronic seal.
In case the official certificate is not submitted in the IMSOC, the statements which are not relevant must be crossed out, initialled and stamped by the certifying officer, or completely removed from the certificate.
[International standard two-letter code for a country in accordance with the ISO 3166 alpha-2 international standard; http://www.iso.org/iso/country_codes/iso-3166-1_decoding_table.htm.] [Council Regulation (EEC) No 2658/87 of 23 July 1987 on the tariff and statistical nomenclature and on the Common Customs Tariff (OJ L 256, 7.9.1987, p. 1, ELI: http://data.europa.eu/eli/reg/1987/2658/oj).] [Last version: www.unece.org/uncefact/codelistrecs.html.]
Box | Description
Country
Indicate the name of the third country issuing the certificate.
1 | Consignor/Exporter
Indicate the name and address, country and ISO country code, of the natural or legal person dispatching the consignment. This person shall be established in a third country, except for the re-entry of consignments originating in the Union.
2 | Certificate reference
Indicate the unique alphanumeric code assigned by the competent authority of the third country. This box is not compulsory for certificates submitted in the IMSOC. Repeated in box II.a.
2a | IMSOC reference
This is the unique alphanumeric code assigned by the IMSOC. Repeated in box II.b.
This box shall not be completed if the certificate is not submitted in the IMSOC.
3 | Central competent authority
Indicate the name of the central authority in the third country issuing the certificate.
4 | Local competent authority
Indicate, if applicable, the name of the local authority in the third country issuing the certificate.
5 | Consignee/Importer
Indicate the name and address of the natural or legal person to whom the consignment is destined in the Member State of destination.
6 | Operator responsible for the consignment
Indicate the name and address, country and ISO country code, of the natural or legal person in the Member State in charge of the consignment when presented at the Border Control Post (BCP) who makes the necessary declarations to the competent authorities as the importer or on behalf of the importer. This operator may be the same as indicated in box I.5.
This box is optional.
7 | Country of origin
Indicate the name and ISO country code of the country where the goods originate from, were grown, harvested or produced for food and feed listed in the Annexes due to a possible risk of contamination by mycotoxins, including aflatoxins, or by plant toxins, or due to possible non-compliance with the maximum allowed levels of pesticide residues.
Indicate the name and ISO country code of the country where the goods were produced, manufactured or wrapped for food and feed listed in the Annexes due to the risk of presence of Salmonella or due to other hazards than those specified in the first paragraph.
8 | Region of origin
Not applicable.
9 | Country of destination
Indicate the name and ISO country code of Member State of destination of the products.
10 | Region of destination
Not applicable.
11 | Place of dispatch
Indicate the name and address, country and ISO country code of the establishment(s) from where the products come from. Where required by Union legislation, indicate its registration or approval number.
For other products: any unit of a company in the food or feed sector. Only the establishment shipping the products is to be named.
In the case of trade involving more than one third country (triangular trade), the place of dispatch is the last third-country establishment of the export chain from which the final consignment is transported to the Union.
12 | Place of destination
Indicate the name and address, country and ISO country code, of the place where the consignment is being delivered for final unloading. Where applicable, also indicate the registration or approval number of the establishment of destination.
13 | Place of loading
Not applicable.
14 | Date and time of departure
Indicate the date when the means of transport departs (aircraft, vessel, railway or road vehicle).
15 | Means of transport
Select one or more of the following means of transport for goods leaving the country of dispatch, and indicate its identification:
aircraft (indicate the flight number);
vessel (indicate the vessel name and number);
railway (indicate the train identity and wagon number);
road vehicle (indicate the registration number with trailer number, if applicable).
In the case of a ferry, tick ‘vessel’ and identify the road vehicle(s) with registration number (with trailer number, if applicable), in addition to the name and number of the scheduled ferry.
16 | Entry Border Control Post
Indicate the name of the BCP of entry into the Union for certificates not submitted in the IMSOC or select the name of the BCP of entry into the Union and its unique alphanumeric code assigned by the IMSOC.
17 | Accompanying documents
Indicate the type of required document: analytical report/ results of sampling and analyses referred to in Article 10 of Implementing Regulation (EU) 2019/1793, and indicate the unique code of required accompanying documents and country of issue.
Other documents: indicate the type and reference number of document when a consignment is accompanied by other documents such as commercial documents (for example, the airway bill number, the bill of lading number or the commercial number of the train or road vehicle).
18 | Transport conditions
Indicate the category of required temperature during the transport of products (ambient, chilled, frozen).
19 | Container number/Seal number
Where applicable, indicate the container number and seal number (more than one possible).
The container number must be provided if the goods are transported in closed containers.
Only the official seal number must be stated. An official seal applies if a seal is affixed to the container, truck or rail wagon under the supervision of the competent authority issuing the certificate.
20 | Certified as or for
Select the intended use of goods as specified in the relevant Union legislation:
Feedstuffs: concerns only products intended for animal feed.
Products for human consumption: concerns only products intended for human consumption for which an official certificate is required by Union legislation.
21 | For transit
Not applicable.
22 | For internal market
Tick this box where consignments are intended to be placed on the Union market.
23 | For re-entry
Not applicable.
24 | Total number of packages
Indicate the total number of packages in the consignment, where appropriate.
In the case of bulk consignments, this box is optional.
25 | Total quantity
Not applicable.
26 | Total net weight/gross weight (kg)
The total net weight is the mass of goods themselves, without immediate containers or any packaging. It is automatically calculated by the IMSOC on the basis of the information entered in box I.27. The declared net weight of glazed food shall be exclusive of the glaze.
Indicate the total gross weight, i.e. the aggregate mass of the goods, plus immediate containers and all their packaging, but excluding transport containers and other transport equipment.
27 | Description of consignment
Indicate the relevant Harmonised System (HS) code and the title defined by the World Customs Organisation as referred to in Council Regulation (EEC) No 2658/87. This customs description shall be supplemented, if necessary, by additional information required to classify the products. In addition, state any specific requirements relating to the nature/processing of the products as defined in the relevant Union legislation.
Indicate the species, and approval number of establishments when applicable together with ISO country code, number of packages, type of packaging, batch number, and net weight. Tick ‘final consumer’ where products are packaged for final consumers.
Species: indicate the scientific name or as defined in accordance with Union legislation.
Type of packaging: identify the type of packaging according to the definition given in Recommendation No 21 of UN/CEFACT (United Nations Centre for Trade Facilitation and Electronic Business).
Box | Description
Country
Indicate the name of the third country issuing the certificate.
Certificate model
This box refers to the specific title of each model of certificate.
II | Health information
This box refers to the specific Union health requirements applicable to the nature of the products and as defined in the equivalence agreements with certain third countries or in other Union legislation, such as that for certification.
2a | Certificate reference
This is the unique alphanumeric code indicated in box I.2.
2b | IMSOC reference
This is the unique alphanumeric code indicated in box I.2a.
Certifying officer
This box refers to the signature of the certifying officer as defined in Article 3, point (26), of Regulation (EU) 2017/625.
Indicate the name in capital letters, qualification and title, where applicable, of the signatory, and the name and original stamp of the competent authority the signatory is attached to and date of signature.