These specifications concern data about the following structural subsystems of the Union rail system:
the infrastructure subsystem;
the energy subsystem;
the trackside control-command and signalling subsystem.
The main purpose of the register of infrastructure is to set out transparent characteristics of the network and be used as a reference database.
The register of infrastructure shall support the following processes:
check before the use of authorised vehicles in accordance with Article 23 of Directive (EU) 2016/797;
design of mobile subsystems;
check of the feasibility of train services;
publication of rules and restrictions of a strictly local nature in accordance with Article 14(11) of Directive (EU) 2016/797;
verification of technical compatibility between fixed installations in accordance with point (b) of Article 18(4) of Directive (EU) 2016/797;
monitoring of the progress of interoperability in the Union rail system;
establishment of the network statement relating to the nature of infrastructure;
compilation of the Route Book referred to in Appendix D2 to Implementing Regulation (EU) 2019/773 in accordance with Article 6(2);
reuse of data in the register of infrastructure in other IT tools.
The register of infrastructure shall:
provide the value of the parameters to be used to check the technical compatibility between vehicle and route;
provide relevant data to identify infrastructure characteristics of the intended area of use and facilitate the design of rolling stock and the feasibility check of train services;
enable Member States to include in the register of infrastructure rules and restrictions of a strictly local nature;
provide relevant data to facilitate the verification of the technical compatibility between a fixed subsystem and the network into which it is incorporated and to monitor the progress of interoperability of railway fixed installations;
provide the information necessary for the Route Book;
enable the use of the register of infrastructure as reference database for the network statement or other IT tools.
The characteristics set out in this Annex shall be applied across the Union rail system, as a common vocabulary specification enabling:
the infrastructure managers to publish their railway network data;
the railway undertakings and any other infrastructure data users to access and use these data.
For the purposes of this Annex, the following definitions shall apply:
‘section of line’ (SoL) means the part of line between adjacent operational points that may consist of several tracks;
‘operational point’ (OP) means any location for train service operations, where train services may begin and end or change route and where passenger or freight services may be provided; it includes locations at boundaries between Member States or infrastructure managers;
‘location point’ (LP) means any specific point on a track of a SoL where value of a parameter changes;
‘running track’ means any track used for train service movements; it does not include passing loops and meeting loops on plain line or track connections only required for train operation;
‘siding’ means any track within an operational point, which is not used for operational routing of a train;
‘common characteristics subset’ means a subset of items shared by sections of lines and/or operational points.
3.2.1.
For the purposes of the register of infrastructure, each infrastructure manager shall describe its railway network at least by sections of line and operational points and optionally via common characteristic subsets.
3.2.2.
Items to be published for ‘section of line’ related to infrastructure, energy and track-side control-command and signalling subsystems shall be assigned to the infrastructure element ‘running track’.
3.2.3.
Items to be published for ‘operational point’ related to infrastructure subsystem shall be assigned to the infrastructure elements ‘running track’ and ‘siding’.
3.3.1.
Items shall be published in accordance with Table 1.
3.3.2.
The register of infrastructure application guide referred to in Article 7 shall specify the specific format and the governance process of the data listed in Table 1 presented in one of the following ways:
a single or multiple selection from a predefined list;
a CharacterString or the predefined CharacterString;
a number indicated inside square brackets.
3.3.3.
The value of a parameter shall be provided when the corresponding item exists on the network that is described in accordance with the deadlines in Table 1.
The data presentation of the parameters listed in Table 1 shall be in accordance with the ERA Vocabulary referred to in Article 7a and referenced in Appendix A-1, index [A].
Any information relevant to the parameters is provided in Table 1. When Table 1 refers to a document of the infrastructure manager, the infrastructure manager in accordance with Article 5 shall submit such document to the Agency in an electronic format. Documents referred to in parameters 1.1.1.1.2.4.4, 1.1.1.1.6.4, 1.1.1.1.6.5, 1.1.1.3.7.1.3 and 1.1.1.3.11.3 shall be submitted in two EU languages.
Number | Title | Definition | Deadline to provide the parameter
1 | MEMBER STATE
1.1 | SECTION OF LINE
1.1.0.0.0 | Generic information
1.1.0.0.0.1 | Infrastructure manager (IM)'s code | Infrastructure manager means anybody or undertaking that is responsible in particular for establishing and maintaining railway infrastructure or a part thereof. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.0.2 | National line identification | Unique line identification or unique line number within Member State. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.0.3 | Operational point at start of section of line | Unique OP ID at start of section of line (kilometres increasing from start OP to the end OP). | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.0.4 | Operational point at end of section of line | Unique OP ID at end of section of line (kilometres increasing from start OP to the end OP) | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.0.5 | Length of section of line | Length between operational points at start and end of section of line. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.0.6 | Nature of Section of Line | Kind of section of line expressing size of presented data which depends on fact whether it connects OPs generated by division of a big node into several OPs or not. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.0.0.1 | Route book specific parameters (Specifical technical characteristics)
1.1.0.0.1.1 | Industrial risks — locations where it is dangerous for the driver to step out | Well Known Text polygonal shape | 12 months after publication of Article 7 Guide
1.1.0.0.1.2 | Operating language | The language or languages used in daily operation by infrastructure manager and published in its Network Statement, for the communication of operational or safety related messages between the staff of the infrastructure manager and the railway undertaking | 12 months after publication of Article 7 Guide
1.1.0.0.1.3 | Operational regime | Double track type | 12 months after publication of Article 7 Guide
1.1.1 | RUNNING TRACK
1.1.1.0.0 | Generic information
1.1.1.0.0.1 | Identification of track | Unique track identification or unique track number within section of line | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.0.0.2 | Normal running direction |
The normal running direction is:
the same as the direction defined by the start and end of the SoL: (N)
the opposite to the direction defined by the start and end of the SoL: (O)
both directions: (B)
In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.0.0.3 | Lineside indications of distance (frequency, appearance and positioning) |
[NNNN] frequency in meters
Appearance – selectable list
[L/R] – the side along the track where the lineside indication is positioned (left or right)
12 months after publication of Article 7 Guide
1.1.1.0.1 | Topology information
1.1.1.0.1.1 | Accurate geographical description | Well Known Text line string representing the geographical shape of the track | 12 months after publication of Article 7 Guide
1.1.1.0.1.2 | Tracks connectivity to operational points |
The first character string uniquely identifies the track inside the operational point at start connected to this track
The second character string uniquely identifies the track inside the operational point at end connected to this track
12 months after publication of Article 7 Guide
1.1.1.1 | Infrastructure subsystem
1.1.1.1.1 | Declarations of verification for track
1.1.1.1.1.1 | EC declaration of verification for track relating to compliance with the requirements from technical specifications for interoperability (TSIs) applicable to infrastructure subsystem | Unique number for EC declarations in accordance with Commission Implementing Regulation (EU) 2019/250 (1). | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.1.2 | EI declaration of demonstration (as defined Commission 2014/881/EU (2)) for track relating to compliance with the requirements from TSIs applicable to infrastructure subsystem | Unique number for EI declarations following the same format requirements as specified for EC declarations in Annex VII of Commission Implementing Regulation (EU) 2019/250. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2 | Performance parameter
1.1.1.1.2.1 | Trans-European Network (TEN) classification of track | Indication of the part of the trans-European network the line belongs to. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.1.2 | TEN geographic information system identity (GIS ID) | Indication of the GIS ID of the section of TEN-T database to which the track belongs | 1 January 2021
1.1.1.1.2.2 | Category of line | Classification of a line according to the TSI INF | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.3 | Part of a Railway Freight Corridor | Indication whether the line is designated to a Railway Freight Corridor | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.4 | Load capability | A combination of the line category and speed at the weakest point of the track | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.4.1 | National classification for load capability | National classification for load capability | 16 January 2020
1.1.1.1.2.4.2 | Compliance of structures with the High Speed Load Model (HSLM) |
For sections of line with a maximum permitted speed of 200 km/h or more.
Information regarding the procedure to be used to perform the dynamic compatibility check
16 January 2020
1.1.1.1.2.4.3 | Railway location of structures requiring specific checks | Localisation of structures requiring specific checks | 16 January 2020
1.1.1.1.2.4.4 | Document with the procedure(s) for static and dynamic route compatibility checks |
Electronic document available in two EU languages from the IM stored by the Agency with:
precise procedures for the static and dynamic route compatibility checks;
Or
relevant information for carrying out the checks for specific structures.
16 January 2020
1.1.1.1.2.5 | Maximum permitted speed | Nominal maximum operational speed on the line as a result of infrastructure, energy and control, command and signalling subsystem characteristics expressed in kilometres/hour. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.6 | Temperature range | Temperature range for unrestricted access to the line according to European standard. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.7 | Maximum altitude | HighFest point of the section of line above sea level in reference to Normal Amsterdam's Peil (NAP). | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.2.8 | Existence of severe climatic conditions | Climatic conditions on the line are severe according to European standard. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.3 | Line layout
1.1.1.1.3.1.1 | Gauging |
Gauges as defined in European standard or other local gauges, including lower or upper part.
In accordance with point 7.3.2.2 of TSI LOC&PAS, sections of lines of the United Kingdom of Great Britain network may not have gauge reference profile.
16 January 2020
1.1.1.1.3.1.2 | Railway location of particular points requiring specific checks | Location of particular points requiring specific checks due to deviations from gauging referred to in 1.1.1.1.3.1.1. | 16 January 2020
1.1.1.1.3.1.3 | Document with the transversal section of the particular points requiring specific checks | Electronic document available from the IM stored by the Agency with the transversal section of the particular points requiring specific checks due to deviations from gauging referred to in 1.1.1.1.3.1.1. Where relevant, guidance for the check with the particular point may be attached to the document with the transversal section. | 16 January 2020
1.1.1.1.3.4 | Standard combined transport profile number for swap bodies | Coding for combined transport with swap bodies (for all freight and mixed-traffic lines) in accordance with the specification referenced in Appendix A-1, index [B] |
by 16 March 2019 at the latest for lines belonging to the TEN (1.1.1.1.2.1)
For lines Off-TEN (1.1.1.1.2.1), when data not yet provided, upon justified request:
When data available, publication of the codification one month after the request
When data is not available and field measurements are needed, publication of the codification one year after the request
1.1.1.1.3.5 | Standard combined transport profile number for semi-trailers | Coding for combined transport for semi-trailers (for all freight and mixed-traffic lines) in accordance with the specification referenced in Appendix A-1, index [B] |
by 16 March 2019 at the latest for lines belonging to the TEN (1.1.1.1.2.1)
For lines Off-TEN (1.1.1.1.2.1), when data not yet provided, upon justified request:
When data available, publication of the codification one month after the request
When data is not available and field measurements are needed, publication of the codification one year after the request
1.1.1.1.3.5.1 | Specific information | Any relevant information from the IM relating to the line layout | 1 January 2021
1.1.1.1.3.6 | Gradient profile | Sequence of gradient values and locations of change in gradient | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.3.7 | Minimum radius of horizontal curve | Radius of the smallest horizontal curve of the track in metres. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.3.8 | Standard combined transport profile number for containers | Coding for combined transport for containers (for all freight and mixed-traffic lines) in accordance with the specification referenced in Appendix A-1, index [B] |
12 months after the adoption of the Article 7 Guide for lines belonging to the TEN (1.1.1.1.2.1)
For lines Off-TEN (1.1.1.1.2.1), When data not yet provided, upon justified request:
When data available, publication of the codification one month after the request
When data is not available and field measurements are needed, publication of the codification one year after the request
1.1.1.1.3.9 | Standard combined transport profile number for roller units | Coding for combined transport for roller units (for all freight and mixed-traffic lines) in accordance with the specification referenced in Appendix A-1, index [B] |
12 months after the adoption of the Article 7 Guide for lines belonging to the TEN (1.1.1.1.2.1)
For lines Off-TEN (1.1.1.1.2.1), When data not yet provided, upon justified request:
When data available, publication of the codification one month after the request
When data is not available and field measurements are needed, publication of the codification one year after the request
1.1.1.1.4 | Track parameters
1.1.1.1.4.1 | Nominal track gauge | Value expressed in millimetres that identifies the track gauge. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.4.2 | Cant deficiency | Maximum cant deficiency expressed in millimetres defined as difference between the applied cant and a higher equilibrium cant the line has been designed for. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.4.3 | Rail inclination | An angle defining the inclination of the head of a rail relative to the running surface | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.4.4 | Existence of ballast | Specifies whether track construction is with sleepers embedded in ballast or not. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.5 | Switches and crossings
1.1.1.1.5.1 | TSI compliance of in service values for switches and crossings | Switches and crossings are maintained to in service limit dimension as specified in TSI. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.5.2 | Minimum wheel diameter for fixed obtuse crossings | Maximum unguided length of fixed obtuse crossings is based on a minimum wheel diameter in service expressed in millimetres. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.6 | Track resistance to applied loads
1.1.1.1.6.1 | Maximum train deceleration | Limit for longitudinal track resistance given as a maximum allowed train deceleration and expressed in metres per square second. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.6.2 | Use of eddy current brakes | Indication of limitations on the use of eddy current brakes. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.6.3 | Use of magnetic brakes | Indication of limitations on the use of magnetic brakes. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.6.4 | Document with the conditions for the use of eddy current brakes | Electronic document available in two EU languages from the IM stored by the Agency with conditions for the use of eddy current brakes identified in 1.1.1.1.6.2. | 16 January 2020
1.1.1.1.6.5 | Document with the conditions for the use of magnetic brakes | Electronic document available in two EU languages from the IM stored by the Agency with conditions for the use of magnetic brakes identified in 1.1.1.1.6.3. | 16 January 2020
1.1.1.1.7 | Health, safety and environment
1.1.1.1.7.1 | Use of flange lubrication forbidden | Indication whether the use of on-board device for flange lubrication is forbidden. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.7.2 | Existence of level crossings | Indication whether level crossings (including pedestrian track crossing) exist on the section of line. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.7.3 | Acceleration allowed near level crossing | Existence of limit for acceleration of train if stopping or recovering speed close to a level crossing expressed in a specific reference acceleration curve. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.7.4 | Existence of trackside hot axle box detector (HABD) | Existence of trackside HABD | 16 January 2020
1.1.1.1.7.5 | Trackside HABD TSI compliant |
Specific for the French, Italian and Swedish networks.
Trackside hot axle box detector TSI compliant.
16 January 2020
1.1.1.1.7.6 | Identification of trackside HABD |
Specific for the French, Italian and Swedish networks.
Applicable if trackside HABD is not TSI compliant, identification of trackside hot axle box detector.
16 January 2020
1.1.1.1.7.7 | Generation of trackside HABD |
Specific for the French Italian and Swedish networks.
Generation of trackside hot axle box detector.
16 January 2020
1.1.1.1.7.8 | Railway location of trackside HABD |
Specific for the French Italian and Swedish networks.
Applicable if trackside HABD is not TSI compliant, localisation of trackside hot axle box detector.
16 January 2020
1.1.1.1.7.9 | Direction of measurement of trackside HABD |
Specific for the French Italian and Swedish networks.
Applicable if trackside HABD is not TSI compliant, direction of measurement of trackside Hot Axle Box Detector.
If the direction of measurement is:
the same as the direction defined by the start and end of the SoL: (N)
the opposite to the direction defined by the start and end of the SoL: (O)
both directions: (B)
16 January 2020
1.1.1.1.7.10 | Steady red lights required | Sections where two steady red lights are required in accordance with TSI OPE | 1 January 2021
1.1.1.1.7.11 | Belonging to a quieter route | Belonging to a ‘quieter route’ in accordance with Article 5b of TSI NOI | 1 January 2021
1.1.1.1.7.12 | Permit of use of reflective plates | Sections where is permitted to use the reflective plates on rail freight corridors, with a view to prioritise the current bottlenecks. Specific case for Belgium, France, Italy, Portugal and Spain until 1.1.2026 | 12 months after publication of Article 7 Guide
1.1.1.1.7.12.1 | Conditions for use of reflective plates | Details of any conditions for using the reflective plates on freight corridors. Specific case for Portugal and Spain until 1.1.2025 and Belgium and France until 1.1.2026 | 12 months after publication of Article 7 Guide
1.1.1.1.8 | Tunnel
1.1.1.1.8.1 | IM's code | Infrastructure Manager means anybody or undertaking that is responsible in particular for establishing and maintaining railway infrastructure or a part thereof. | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest
1.1.1.1.8.2 | Tunnel identification | Unique tunnel identification or unique number within Member State | In accordance with Implementing Decision 2014/880/EU and by 16 March 2019 at the latest