In response to that mandate, CEPT issued Report 68 [CEPT Report 68: ‘Report B from CEPT to the European Commission in response to the Mandate “to develop harmonised technical conditions for spectrum use in support of the introduction of next-generation (5G) terrestrial wireless systems in the Union”, Harmonised technical conditions for the 24,25-27,5 GHz (“26 GHz”) frequency band’, link: https://www.ecodocdb.dk/document/3358.] (‘the CEPT Report’) on 6 July 2018. This specifies harmonised technical conditions in the 26 GHz frequency band for terrestrial systems capable of providing wireless broadband electronic communications services in the Union, which are suitable for 5G use. Those technical conditions are consistent with 5G standardisation developments regarding channelling arrangements [3GPP standardisation (Release 15, TS 38.104 transposed as ETSI TS 138104) defines the 26 GHz frequency band (band n258) for use with New Radio (NR) technology based on time division duplex, and channel bandwidths of 50 MHz, 100 MHz, 200 MHz, and 400 MHz.], namely channel size or duplex mode of operation, and active antenna systems and are therefore conducive to global harmonisation. They assume synchronised operation of neighbouring systems of different operators, which ensures that the spectrum is used efficiently. Unsynchronised or semi-synchronised operation of neighbouring systems requires further studies in order to develop relevant harmonised technical conditions. Such operation remains possible with geographical separation.
Recital 13, Decision_act (EU) 2019/784
In forcesince 14 May 2019