Under the mass balance methodology, the operator shall calculate the quantity of CO2 corresponding to each source stream included in the mass balance by multiplying the activity data related to the amount of fuel, material or CO2 transferred entering or leaving the boundaries of the mass balance, with the fuel’s, material’s or CO2 transfer’s carbon content multiplied by its fossil fraction and by 3,664 t CO2/t C, applying Section 3 of Annex II to this Regulation.
For the purpose of reporting memo-items, the operator shall also calculate for each source stream covered by the mass balance the following parameters which are defined by these calculations:
The total preliminary quantity of CO2 shall be calculated by multiplying the activity data related to the amount of fuel or material entering or leaving the boundaries of the mass balance, with the fuel’s or material’s carbon content and by 3,664 t CO2/t C;
The quantity of CO2 relating to biomass shall be calculated by multiplying the total preliminary quantity of CO2 by the biomass fraction;
The quantity of CO2 relating to zero-rated biomass shall be calculated by multiplying the total preliminary quantity of CO2 by the zero-rated biomass fraction;
If applicable, the quantity of CO2 relating to RFNBO, RCF or synthetic low-carbon fuels shall be calculated by multiplying the total preliminary quantity of CO2 by the RFNBO or RCF fraction or the synthetic low-carbon fraction;
If applicable, the quantity of CO2 relating to zero-rated RFNBO, RCF or synthetic low-carbon fuels shall be calculated by multiplying the total preliminary quantity of CO2 by the zero-rated RFNBO or RCF fraction or the zero-rated synthetic low-carbon fraction.
Notwithstanding Article 49, the emissions of the total process covered by the mass balance shall be the sum of the CO2 quantities corresponding to all source streams covered by the mass balance. CO emitted to the atmosphere shall be calculated in the mass balance as emission of the molar equivalent amount of CO2.
Where the operator uses a mass balance in accordance with this Article, and zero-rated carbon is contained in input materials or fuels, and output materials contain carbon, the operator shall provide to the competent authority data on the zero-rated fraction of the carbon content of the output streams. The operator shall thereby provide evidence that the installation’s total emissions are not systematically underestimated by the applied monitoring methodology and that the total mass of carbon corresponding to the zero-rated carbon fractions of the carbon contained in all relevant output materials, is not lower than the total mass of zero-rated fractions of the carbon contained in input materials and fuels.
For the purpose of the first subparagraph, Article 39, paragraphs 3 and 4 shall apply regarding the zero-rated biomass fraction of biogas and natural gas used as input.