ANNEX V, Regulation (EU) 2018/975

In forcesince 21 Aug 2026cited 2×
1.

The following fields of data shall be collected pursuant to Articles 16, 17 and 22:

(i)

Current vessel flag and name of vessel

(ii)

Registration number

(iii)

IRCS (if any)

(iv)

IMO number

(v)

Previous names (if known)

(vi)

Port of registry

(vii)

Previous flag

(viii)

Type of vessel

(ix)

Type of fishing method(s)

(x)

Length

(xi)

Length type e.g. ‘LOA’, ‘LBP’

(xii)

Gross tonnage – GT (to be provided as the preferred unit of tonnage)

(xiii)

Gross registered tonnage – GRT (to be provided if GT not available; may also be provided in addition to GT)

(xiv)

Power of main engine(s) (kw)

(xv)

Hold capacity (m3; if applicable)

(xvi) Freezer type (if applicable)

(xvii) Number of freezer units (if applicable)

(xviii) Freezing capacity (if applicable)

(xix) Vessel communication types and numbers (e.g. (INMARSAT A, B and C numbers, TSACOM, VSAT, STARLINK), which must be compatible with those used by the SPRFMO Secretariat

(xx)

VMS system details (brand, model, features and identification);

(xxi) Name of owner(s)

(xxii) Address of owner(s)

(xxiii) Vessel authorisation start date

(xxiv) Vessel authorisation end date

(xxv) Date of inclusion in the SPRFMO record of vessels

(xxvi) Good quality high resolution digital photographs of the vessel of appropriate brightness and contrast, no older than 5 years at the time the vessel is first authorised, which shall consist of at least:

(i)

one photograph showing the starboard side of the vessel displaying its full overall length and complete structural features;

(ii)

one photograph showing the port side of the vessel displaying its full overall length and complete structural features;

(iii)

one photograph showing the stern taken directly from astern, including any superstructure.

Photos shall be updated when changes to the vessel characteristics are made (e.g. modified hull, superstructure, external markings). Photos shall be submitted in one of the following file formats: jpeg, png, or tiff.

2.

The following information is to be provided if available when practicable:

(i)

External markings (such as vessel name, registration number or IRCS)

(ii)

Types of fish processing lines (if applicable)

(iii)

Date of construction

(iv)

Place of construction

(v)

Moulded depth

(vi)

Beam

(vii)

Electronic equipment on board (for example radio, echo sounder, radar, netsonda)

(viii)

Name of licence owner(s) (if different from vessel owner)

(ix)

Address of licence owner(s) (if different from vessel owner)

(x)

Name of operator(s) (if different from vessel owner)

(xi)

Address of operator(s) (if different from vessel owner)

(xii)

Name of vessel master

(xiii)

Nationality of vessel master

(xiv)

Name of fishing master

(xv)

Nationality of fishing master