ANNEX II, Regulation (EU) 2018/574

In forcesince 21 Dec 2023cited 1×

The messages required for regulatory purposes shall contain at least the data fields listed in this Annex.

Member States and the Commission may require an extension of the address data to include exact geographic coordinates (latitude and longitude). Both ID issuers and providers of data repositories (including the router) may decide to extend the message content for strictly technical reasons to secure smooth functioning of the traceability system. ID issuers may also decide to extend the message content for non-technical reasons to secure smooth functioning of the tobacco products traceability system with other systems used for regulatory purposes. Before becoming effective, such extensions shall be reflected in the technical specifications updated in accordance with Article 28.

The messages listed in this Annex do not include the messages to be sent back by ID issuers and providers of data repositories (including the router) to the economic operators, such as acknowledgments of receipt.

All the messages generated within the traceability system shall contain the identification of the message originator and a timestamp up to the millisecond (see Data Type: Time(L)). This timestamp does not replace the time of the occurrence of a reported event, which shall be reported separately in accordance with the data fields prescribed in this Annex. The identification of the message originator, which may concern a third-party IT service provider, does not replace the identification of the economic operator responsible for the reporting activity (via an EOID to be indicated in the EO_ID field). The means of the identification of the message originator shall be specified in the technical specifications established and updated in accordance with Article 28.

ID issuers and providers of data repositories (including the router) shall timestamp each received message up to the millisecond.

In case of amendments to this Annex, any changes in the key messages listed herein become applicable to the economic operators as of the moment such changes are duly reflected in the technical specifications and the common data dictionary established and updated in accordance with Article 28.

Data Type | Description | Example

ARC | Administrative Reference Code (ARC) or any successive code adopted under the Excise Movement and Control System (EMCS) | ‘15GB0123456789ABCDEF0’

aUI |

Aggregated level unique identifier coded with:

either

the invariant set of ISO646:1991 and composed of four blocks: (a) ID issuer's prefix in accordance with ISO15459-2:2015, (b) serialisation element in the format established by the ID issuer, (c) tobacco facility identifier code following the Data Type: FID and (d) timestamp following the Data Type: Time(s)

or

the invariant set of ISO646:1991 forming a code structured in accordance with ISO15459-1:2014 or ISO15459-4:2014 (or their latest equivalent)

Boolean | Boolean value |

‘0’ (false/disabled)

‘1’ (true/enabled)

Country |

Country name coded with ISO-3166-1:2013 alpha-2 (or its latest equivalent). For overseas and autonomous regions, the country code of the relevant Member State is applicable.

In case of Northern Ireland, the ‘XI’ code is applicable.

In case of the international waters, the ‘XZ’ code is applicable.

‘DE’

Currency | Currency name coded with ISO 4217:2015 (or its latest equivalent) | ‘EUR’

Date | UTC (Coordinated Universal Time) date corresponding to the following format: YYYY-MM-DD | ‘2019-05-20’

Decimal | Number values, decimal allowed | ‘1’ or ‘2,2’ or ‘3,33’

EOID | Economic operator identifier code corresponding to the format established by the ID issuer coded with the invariant set of ISO646:1991 |

FID | Tobacco facility identifier code corresponding to the format established by the ID issuer coded with the invariant set of ISO646:1991 |

Integer | Rounded number values, no decimal numbers | ‘1’ or ‘22’ or ‘333’

MID | Machine identifier code corresponding to the format established by the ID issuer coded with the invariant set of ISO646:1991 |

MRN | Movement Reference Number (MRN) is a unique customs registration number. It contains 18 digits and is composed of the following elements: (a) last two digits of the year of formal acceptance of export movement (YY), (b) country name coded with ISO-3166-1:2013 alpha-2 (or its latest equivalent) of the Member State to which the declaration was sent, (c) unique identifier for entry/import per year and country, and (d) check digit. | ‘11IT9876AB88901235’

SEED | Excise number composed of: (a) country name coded with ISO-3166-1:2013 alpha-2 (or its latest equivalent) (e.g. ‘LU’) and (b) eleven alphanumeric characters, if needed, padded to the left with zeroes (e.g. ‘00000987ABC’). | ‘LU00000987ABC’

ITU | Individual transport unit code (e.g. SSCC) generated in accordance with ISO15459-1:2014 (or its latest equivalent) | ‘001234560000000018’

Text | Set of characters coded with ISO8859-15:1999 | ‘Abcde:12345’

Time(L) |

UTC (Coordinated Universal Time) in the following format:

YYYY-MM- DDTHH:mm:ss.SSSZ

‘2019-07-16T19:20:30.205Z’

Time(s) | UTC (Coordinated Universal Time) in the following format: YYMMDDhh | ‘19071619’

TPID | Tobacco Product Identifier (TP-ID) – numeric identifier used in the EU-CEG system in the format: NNNNN-NN-NNNNN | ‘02565-16-00230’

PN | Product number – numeric identifier used in the EU-CEG system to identify product presentations (e.g. GTIN (Global Trade Identification Number) of the product) | ‘00012345600012’

upUI(L) | Unit packet level unique identifier coded with the invariant set of ISO646:1991 and composed of three blocks: (i) ID issuer’s prefix in accordance with ISO15459-2:2015, (ii) middle block in the format established by the ID issuer and (iii) timestamp following the Data Type: Time(s) |

upUI(i) | Unit packet level unique identifier coded with the invariant set of ISO646:1991 and composed of two blocks: (i) ID issuer’s prefix in accordance with ISO15459-2:2015 and (ii) middle block in the format established by the ID issuer (i.e. upUI(i) is upUI(L) without the timestamp, a code to be generated by ID issuers in accordance with Article 8(2) of this Regulation) |

upUI(s) |

Unit packet level unique identifier coded with the invariant set of ISO646:1991 and composed of two blocks: (i) ID issuer’s prefix in accordance with ISO15459-2:2015 and (ii) serialisation element in the format established by the ID issuer (i.e. UI made visible in the human readable format on the unit packets in accordance with Article 23 of this Regulation)

Whenever possible ID issuers are requested not to use upper-case letter ‘O’ (Oscar) and lower-case letter ‘l’ (lima) as well as upper-case letter ‘I’ (India) in order to avoid confusions with digits ‘0’ (zero) and ‘1’ (one), respectively.

Year | UTC (Coordinated Universal Time) year in the following format: YYYY | ‘2024’

Type | Description

Simple (S) | Single value

Multiple (M) | Multiple values

Type | Description

Mandatory (M) | The variable must be completed to successfully submit the message

Optional (O) | The variable relates to supplementary fields which remain optional

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-1

EO_Name1 | Economic operator's registered name | Text | S | M |

EO_Name2 | Economic operator's alternative or abridged name | Text | S | O |

EO_street | Economic operator’s street name and house number (or road number and kilometre) | Text | S | M |

EO_municipality | Economic operator’s municipality (city, town or village) | Text | S | M |

EO_postcode | Economic operator’s postal code | Text | S | M | ‘n/a’ is permitted value if no postal code has been assigned

EO_A_info | Additional information on economic operator’s address (e.g. location in the shopping mall or industrial area) | Text | S | O |

EO_CountryReg | Economic operator's country of registration | Country | S | M |

EO_Email | Economic operator's email address used to inform about registration process, including subsequent changes and other required correspondence | Text | S | M |

VAT_R | Indication of the VAT registration status | Boolean | S | M |

0 – No VAT registration

1 – VAT number exists

VAT_N | Economic operator's VAT number | Text | S | M, if VAT_R = 1 |

TAX_N | Economic operator's tax registration number | Text | S | M, if VAT_R = 0 |

EO_ExciseNumber1 | Indication if the economic operator has an excise number issued by the competent authority for the purpose of identification of persons/premises | Boolean | S | M |

0 – No SEED number

1 – SEED number exists

EO_ExciseNumber2 | Economic operator's excise number issued by the competent authority for the purpose of identification of persons/premises | SEED | S | M, if EO_ExciseNumber1 = 1 |

OtherEOID_R | Indication if the economic operator has been allocated an identifier by another ID Issuer | Boolean | S | M |

0 – No

1 – Yes

OtherEOID_N | Economic operator identifier codes allocated by other ID Issuers | EOID | M | M, if OtherEOID_R = 1 |

Reg_3RD | Indication if the registration is made on behalf of a retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes

Reg_EOID | Identifier of the economic operator that acts on behalf of a retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-2

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator's confirmation code provided in response to the registration of economic operator | Text | S | M |

EO_Name1 | Economic operator's registered name | Text | S | M |

EO_Name2 | Economic operator's alternative or abridged name | Text | S | O |

EO_street | Economic operator’s street name and house number (or road number and kilometre) | Text | S | M |

EO_municipality | Economic operator’s municipality (city, town or village) | Text | S | M |

EO_postcode | Economic operator’s postal code | Text | S | M | ‘n/a’ is permitted value if no postal code has been assigned

EO_A_info | Additional information on economic operator’s address (e.g. location in the shopping mall or industrial area) | Text | S | O |

EO_CountryReg | Economic operator's country of registration | Country | S | M |

EO_Email | Economic operator's email address used to inform about registration process, including subsequent changes | Text | S | M |

VAT_R | Indication of the VAT registration status | Boolean | S | M |

0 – No VAT registration

1 – VAT number exists

VAT_N | Economic operator's VAT number | Text | S | M, if VAT_R = 1 |

TAX_N | Economic operator's tax registration number | Text | S | M, if VAT_R = 0 |

EO_ExciseNumber1 | Indication if the economic operator has an excise number issued by the competent authority for the purpose of identification of persons/premises | Boolean | S | M |

0 – No SEED number

1 – SEED number exists

EO_ExciseNumber2 | Economic operator's excise number issued by the competent authority for the purpose of identification of persons/premises | SEED | S | M, if EO_ExciseNumber1 = 1 |

OtherEOID_R | Indication if the economic operator has been allocated an identifier by another ID Issuer | Boolean | S | M |

0 – No

1 – Yes

OtherEOID_N | Economic operator identifier codes allocated by other ID Issuers | EOID | M | M, if OtherEOID_R = 1 |

Reg_3RD | Indication if the registration is made on behalf of the retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes

Reg_EOID | Identifier of the economic operator that acts on behalf of the retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-3

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator's confirmation code provided in response to the registration of economic operator | Text | S | M |

Reg_3RD | Indication if the registration is made on behalf of the retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes

Reg_EOID | Identifier of the economic operator that acts on behalf of the retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-4

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator's confirmation code provided in response to the registration of economic operator | Text | S | M |

F_street | Facility’s street name and house number (or road number and kilometre) | Text | S | M |

F_municipality | Facility’s municipality (city, town or village) | Text | S | M |

F_postcode | Facility’s postal code | Text | S | M | ‘n/a’ is permitted value if no postal code has been assigned

F_A_info | Additional information on facility’s address (e.g. location in the shopping mall or industrial area) | Text | S | O |

F_Country | Facility's country | Country | S | M |

F_Type | Type of facility | Integer | S | M |

1 – manufacturing site with warehouse

2 – standalone warehouse

3 – retail outlet

4 – other

F_Type_Other | Description of other facility | Text | S | M, if F_Type = 4 |

F_Status | Indication if a part of the facility has a tax (excise) warehouse status | Boolean | S | M |

0 – No

1 – Yes

F_ExciseNumber1 | Indication if the facility has an excise number issued by the competent authority for the purpose of identification of persons/premises | Boolean | S | M |

0 – No SEED number

1 – SEED number exists

F_ExciseNumber2 | Facility's excise number issued by the competent authority for the purpose of identification of persons/premises | SEED | S | M, if F_ExciseNumber1 = 1 |

OtherFID_R | Indication if the facility has been allocated an identifier by another ID Issuer | Boolean | S | M |

0 – No

1 – Yes (possible only for non-EU facilities)

OtherFID_N | Facility identifier codes allocated by other ID Issuers | FID | M | M, if OtherFID_R = 1 |

PrevFID_B | Indication if the facility was acquired from another operator and had already a facility identifier code | Boolean | S | M |

0 – No (first time registration)

1 – Yes

PrevFID_ID | Previous facility identifier used by the former operator of the facility | FID | S | M, if PrevFID_B = 1 |

Reg_3RD | Indication if the registration is made on behalf of a retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes (possible only if F_Type = 3)

Reg_EOID | Identifier of the economic operator that acts on behalf of the retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-5

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator's confirmation code provided in response to the registration of economic operator | Text | S | M |

F_ID | Facility identifier code | FID | S | M |

F_street | Facility’s street name and house number (or road number and kilometre) | Text | S | M |

F_municipality | Facility’s municipality (city, town or village) | Text | S | M |

F_postcode | Facility’s postal code | Text | S | M | ‘n/a’ is permitted value if no postal code has been assigned

F_A_info | Additional information on facility’s address (e.g. location in the shopping mall or industrial area) | Text | S | O |

F_Country | Facility's country | Country | S | M |

F_Type | Type of facility | Integer | S | M |

1 – manufacturing site with warehouse

2 – standalone warehouse

3 – retail outlet

4 – other

F_Type_Other | Description of other facility | Text | S | M, if F_Type = 4 |

F_Status | Indication if a part of the facility has a tax (excise) warehouse status | Boolean | S | M |

0 – No

1 – Yes

F_ExciseNumber1 | Indication if the facility has an excise number issued by the competent authority for the purpose of identification of persons/premises | Boolean | S | M |

0 – No SEED number

1 – SEED number exists

F_ExciseNumber2 | Facility's excise number issued by the competent authority for the purpose of identification of persons/premises | SEED | S | M, if F_ExciseNumber1 = 1 |

OtherFID_R | Indication if the facility has been allocated an identifier by another ID Issuer | Boolean | S | M |

0 – No

1 – Yes (possible only for non-EU facilities)

OtherFID_N | Facility identifier codes allocated by other ID Issuers | FID | M | M, if OtherFID_R = 1 |

PrevFID_B | Indication if the facility was acquired from another operator and had already a facility identifier code | Boolean | S | M |

0 – No (first time registration)

1 – Yes

PrevFID_ID | Previous facility identifier used by the former operator of the facility | FID | S | M, if PrevFID_B = 1 |

Reg_3RD | Indication if the registration is made on behalf of the retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes (possible only if F_Type = 3)

Reg_EOID | Identifier of the economic operator that acts on behalf of the retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item # | Field | Comments | Data Type | Cardinality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-6

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator's confirmation code provided in response to the registration of economic operator | Text | S | M |

F_ID | Facility identifier code | FID | S | M |

Reg_3RD | Indication if the de-registration is made on behalf of a retail outlet operator not involved otherwise in the tobacco trade | Boolean | S | M |

0 – No

1 – Yes

Reg_EOID | Identifier of the economic operator that acts on behalf of the retail outlet operator not involved otherwise in the tobacco trade | EOID | S | M, if Reg_3RD = 1 |

Item

#

Field | Comments | Data Type | Cardin-ality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-7

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator’s confirmation code provided in response to the registration of economic operator | Text | S | M |

F_ID | Facility identifier code | FID | S | M |

PrevMID_B | Indication if the object of this request was already registered, e.g. in relation to another facility identifier code | Boolean | S | M |

0 – No (first time registration)

1 – Yes

PrevMID_ID | Previous machine identifier used for the object of this request | MID | S | M, if PrevMID_B = 1 |

M_entirety | Indication if this request concerns the machine (v. a part of thereof) | Boolean | S | M |

0 – No (machine part)

1 – Yes (machine)

P_Producer | Part’s producer | Text | S | M, if M_entirety = 0 |

P_Model | Part’s model | Text | S | M, if M_entirety = 0 |

P_Number | Part’s serial number | Text | S | M, if M_entirety = 0 |

P_Mobile | Indication if this part is intended to be used with multiple machines (fixed v. mobile part) | Boolean | S | M, if M_entirety = 0 |

0 – No (fixed part)

1 – Yes (mobile part)

P_ATD1 | Indication if an anti-tampering device in the sense of Article 2(7) records the functioning of this part | Boolean | S | M, if M_entirety = 0 |

0 – No

1 – Yes

P_ATD2 | Anti-tampering device’s serial number | Text | S | M, if M_entirety = 0 and P_ATD1 = 1 |

P_Description | Part’s description explaining its technical function | Text | S | O |

M_Producer | Machine’s producer | Text | S | M, if M_entirety = 1 |

M_Model | Machine’s model | Text | S | M, if M_entirety = 1 |

M_Number | Machine’s serial number | Text | S | M, if M_entirety = 1 |

M_parts | Indication if the machine consists of multiple separately identifiable parts | Boolean | S | M, if M_entirety = 1 |

0 – No

1 – Yes

M_plist | List of the identifiable parts | MID | M | M, if M_entirety = 1 and M_parts = 1 |

M_ATD | Serial number of the anti-tampering device in the sense of Article 2(7) | Text | S | M, if M_entirety = 1 and M_parts = 0 |

M_Capacity | Maximum capacity over 24-hour production cycle expressed in unit packets | Integer | S | M, if M_entirety = 1 |

Item

#

Field | Comments | Data Type | Cardin-ality | Priority | Values

Message_Type | Identification of message type | Text | S | M | 1-8

EO_ID | Economic operator identifier code | EOID | S | M |

EO_CODE | Economic operator’s confirmation code provided in response to the registration of economic operator | Text | S | M |

F_ID | Facility identifier code | FID | S | M |

M_ID | Machine identifier code (subject to the correction of information) | MID | S | M |

PrevMID_B | Indication if the object of this request was already registered, e.g. in relation to another facility identifier code | Boolean | S | M |

0 – No (first time registration)

1 – Yes

PrevMID_ID | Previous machine identifier code used for the object of this request | MID | S | M, if PrevMID_B = 1 |

M_entirety | Indication if this request concerns the machine (v. a part of thereof) | Boolean | S | M |

0 – No (machine part)

1 – Yes (machine)

P_Producer | Part’s producer | Text | S | M, if M_entirety = 0 |

P_Model | Part’s model | Text | S | M, if M_entirety = 0 |

P_Number | Part’s serial number | Text | S | M, if M_entirety = 0 |

P_Mobile | Indication if this part is intended to be used with multiple machines (fixed v. mobile part) | Boolean | S | M, if M_entirety = 0 |

0 – No (fixed part)

1 – Yes (mobile part)

P_ATD1 | Indication if an anti-tampering device in the sense of Article 2(7) records the functioning of this part | Boolean | S | M, if M_entirety = 0 |

0 – No

1 – Yes

P_ATD2 | Anti-tampering device’s serial number | Text | S | M, if M_entirety = 0 and P_ATD1 = 1 |

P_Description | Part’s description explaining its technical function | Text | S | O |

M_Producer | Machine’s producer | Text | S | M, if M_entirety = 1 |

M_Model | Machine’s model | Text | S | M, if M_entirety = 1 |

M_Number | Machine’s serial number | Text | S | M, if M_entirety = 1 |

M_parts | Indication if the machine consists of multiple separately identifiable parts | Boolean | S | M, if M_entirety = 1 |

0 – No

1 – Yes

M_plist | List of the identifiable parts | MID | M | M, if M_entirety = 1 and M_parts = 1 |

M_ATD | Serial number of the anti-tampering device in the sense of Article 2(7) | Text | S | M, if M_entirety = 1 and M_parts = 0 |

M_Capacity | Maximum capacity over 24-hour production cycle expressed in unit packets | Integer | S | M, if M_entirety = 1 |

This article is long: the rest is at the official publication.