ANNEX VI, Directive (EU) 2018/2001

In forcesince 20 Nov 2023cited 1×

WOODCHIPS

Biomass fuel production system | Transport distance | Greenhouse gas emissions savings –typical value | Greenhouse gas emissions savings – default value

Heat | Electricity | Heat | Electricity

Woodchips from forest residues | 1 to 500 km | 93 % | 89 % | 91 % | 87 %

500 to 2500 km | 89 % | 84 % | 87 % | 81 %

2500 to 10000 km | 82 % | 73 % | 78 % | 67 %

Above 10000 km | 67 % | 51 % | 60 % | 41 %

Woodchips from short rotation coppice (Eucalyptus) | 2500 to 10000 km | 77 % | 65 % | 73 % | 60 %

Woodchips from short rotation coppice (Poplar – Fertilised) | 1 to 500 km | 89 % | 83 % | 87 % | 81 %

500 to 2500 km | 85 % | 78 % | 84 % | 76 %

2500 to 10000 km | 78 % | 67 % | 74 % | 62 %

Above 10000 km | 63 % | 45 % | 57 % | 35 %

Woodchips from short rotation coppice (Poplar – No fertilisation) | 1 to 500 km | 91 % | 87 % | 90 % | 85 %

500 to 2500 km | 88 % | 82 % | 86 % | 79 %

2500 to 10000 km | 80 % | 70 % | 77 % | 65 %

Above 10000 km | 65 % | 48 % | 59 % | 39 %

Woodchips from stemwood | 1 to 500 km | 93 % | 89 % | 92 % | 88 %

500 to 2500 km | 90 % | 85 % | 88 % | 82 %

2500 to 10000 km | 82 % | 73 % | 79 % | 68 %

Above 10000 km | 67 % | 51 % | 61 % | 42 %

Woodchips from industry residues | 1 to 500 km | 94 % | 92 % | 93 % | 90 %

500 to 2500 km | 91 % | 87 % | 90 % | 85 %

2500 to 10000 km | 83 % | 75 % | 80 % | 71 %

Above 10000 km | 69 % | 54 % | 63 % | 44 %

[Case 1 refers to processes in which a natural gas boiler is used to provide the process heat to the pellet mill. Electricity for the pellet mill is supplied from the grid; Case 2a refers to processes in which a woodchips boiler, fed with pre-dried chips, is used to provide process heat. Electricity for the pellet mill is supplied from the grid; Case 3a refers to processes in which a CHP, fed with pre-dried woodchips, is used to provide electricity and heat to the pellet mill.]

WOOD PELLETS

Biomass fuel production system | Transport distance | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Heat | Electricity | Heat | Electricity

Wood briquettes or pellets from forest residues | Case 1 | 1 to 500 km | 58 % | 37 % | 49 % | 24 %

500 to 2500 km | 58 % | 37 % | 49 % | 25 %

2500 to 10000 km | 55 % | 34 % | 47 % | 21 %

Above 10000 km | 50 % | 26 % | 40 % | 11 %

Case 2a | 1 to 500 km | 77 % | 66 % | 72 % | 59 %

500 to 2500 km | 77 % | 66 % | 72 % | 59 %

2500 to 10000 km | 75 % | 62 % | 70 % | 55 %

Above 10000 km | 69 % | 54 % | 63 % | 45 %

Case 3a | 1 to 500 km | 92 % | 88 % | 90 % | 85 %

500 to 2500 km | 92 % | 88 % | 90 % | 86 %

2500 to 10000 km | 90 % | 85 % | 88 % | 81 %

Above 10000 km | 84 % | 76 % | 81 % | 72 %

Wood briquettes or pellets from short rotation coppice (Eucalyptus) | Case 1 | 2500 to 10000 km | 52 % | 28 % | 43 % | 15 %

Case 2a | 2500 to 10000 km | 70 % | 56 % | 66 % | 49 %

Case 3a | 2500 to 10000 km | 85 % | 78 % | 83 % | 75 %

Wood briquettes or pellets from short rotation coppice (Poplar – Fertilised) | Case 1 | 1 to 500 km | 54 % | 32 % | 46 % | 20 %

500 to 10000 km | 52 % | 29 % | 44 % | 16 %

Above 10000 km | 47 % | 21 % | 37 % | 7 %

Case 2a | 1 to 500 km | 73 % | 60 % | 69 % | 54 %

500 to 10000 km | 71 % | 57 % | 67 % | 50 %

Above 10000 km | 66 % | 49 % | 60 % | 41 %

Case 3a | 1 to 500 km | 88 % | 82 % | 87 % | 81 %

500 to 10000 km | 86 % | 79 % | 84 % | 77 %

Above 10000 km | 80 % | 71 % | 78 % | 67 %

Wood briquettes or pellets from short rotation coppice (Poplar – No fertilisation) | Case 1 | 1 to 500 km | 56 % | 35 % | 48 % | 23 %

500 to 10000 km | 54 % | 32 % | 46 % | 20 %

Above 10000 km | 49 % | 24 % | 40 % | 10 %

Case 2a | 1 to 500 km | 76 % | 64 % | 72 % | 58 %

500 to 10000 km | 74 % | 61 % | 69 % | 54 %

Above 10000 km | 68 % | 53 % | 63 % | 45 %

Case 3a | 1 to 500 km | 91 % | 86 % | 90 % | 85 %

500 to 10000 km | 89 % | 83 % | 87 % | 81 %

Above 10000 km | 83 % | 75 % | 81 % | 71 %

Stemwood | Case 1 | 1 to 500 km | 57 % | 37 % | 49 % | 24 %

500 to 2500 km | 58 % | 37 % | 49 % | 25 %

2500 to 10000 km | 55 % | 34 % | 47 % | 21 %

Above 10000 km | 50 % | 26 % | 40 % | 11 %

Case 2a | 1 to 500 km | 77 % | 66 % | 73 % | 60 %

500 to 2500 km | 77 % | 66 % | 73 % | 60 %

2500 to 10000 km | 75 % | 63 % | 70 % | 56 %

Above 10000 km | 70 % | 55 % | 64 % | 46 %

Case 3a | 1 to 500 km | 92 % | 88 % | 91 % | 86 %

500 to 2500 km | 92 % | 88 % | 91 % | 87 %

2500 to 10000 km | 90 % | 85 % | 88 % | 83 %

Above 10000 km | 84 % | 77 % | 82 % | 73 %

Wood briquettes or pellets from wood industry residues | Case 1 | 1 to 500 km | 75 % | 62 % | 69 % | 55 %

500 to 2500 km | 75 % | 62 % | 70 % | 55 %

2500 to 10000 km | 72 % | 59 % | 67 % | 51 %

Above 10000 km | 67 % | 51 % | 61 % | 42 %

Case 2a | 1 to 500 km | 87 % | 80 % | 84 % | 76 %

500 to 2500 km | 87 % | 80 % | 84 % | 77 %

2500 to 10000 km | 85 % | 77 % | 82 % | 73 %

Above 10000 km | 79 % | 69 % | 75 % | 63 %

Case 3a | 1 to 500 km | 95 % | 93 % | 94 % | 91 %

500 to 2500 km | 95 % | 93 % | 94 % | 92 %

2500 to 10000 km | 93 % | 90 % | 92 % | 88 %

Above 10000 km | 88 % | 82 % | 85 % | 78 %

[This group of materials includes agricultural residues with a low bulk density and it comprises materials such as straw bales, oat hulls, rice husks and sugar cane bagasse bales (not exhaustive list).] [The group of agricultural residues with higher bulk density includes materials such as corn cobs, nut shells, soybean hulls, palm kernel shells (not exhaustive list).]

AGRICULTURE PATHWAYS

Biomass fuel production system | Transport distance | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Heat | Electricity | Heat | Electricity

Agricultural Residues with density < 0,2 t/m3 | 1 to 500 km | 95 % | 92 % | 93 % | 90 %

500 to 2500 km | 89 % | 83 % | 86 % | 80 %

2500 to 10000 km | 77 % | 66 % | 73 % | 60 %

Above 10000 km | 57 % | 36 % | 48 % | 23 %

Agricultural Residues with density > 0,2 t/m3 | 1 to 500 km | 95 % | 92 % | 93 % | 90 %

500 to 2500 km | 93 % | 89 % | 92 % | 87 %

2500 to 10000 km | 88 % | 82 % | 85 % | 78 %

Above 10000 km | 78 % | 68 % | 74 % | 61 %

Straw pellets | 1 to 500 km | 88 % | 82 % | 85 % | 78 %

500 to 10000 km | 86 % | 79 % | 83 % | 74 %

Above 10000 km | 80 % | 70 % | 76 % | 64 %

Bagasse briquettes | 500 to 10000 km | 93 % | 89 % | 91 % | 87 %

Above 10000 km | 87 % | 81 % | 85 % | 77 %

Palm Kernel Meal | Above 10000 km | 20 % | -18 % | 11 % | -33 %

Palm Kernel Meal (no CH4 emissions from oil mill) | Above 10000 km | 46 % | 20 % | 42 % | 14 %

[Case 1 refers to pathways in which electricity and heat required in the process are supplied by the CHP engine itself. Case 2 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by the CHP engine itself. In some Member States, operators are not allowed to claim the gross production for subsidies and case 1 is the more likely configuration. Case 3 refers to pathways in which the electricity required in the process is taken from the grid and the process heat is supplied by a biogas boiler. This case applies to some installations in which the CHP engine is not on-site and biogas is sold (but not upgraded to biomethane).] [The values for biogas production from manure include negative emissions for emissions saved from raw manure management. The value of esca considered is equal to – 45 g CO2eq/MJ manure used in anaerobic digestion.] [Open storage of digestate accounts for additional emissions of CH4 and N2O. The magnitude of those emissions changes with ambient conditions, substrate types and the digestion efficiency.] [Close storage means that the digestate resulting from the digestion process is stored in a gas-tight tank and that the additional biogas released during storage is considered to be recovered for production of additional electricity or biomethane. No greenhouse gas emissions are included in that process.] [Maize whole plant means maize harvested as fodder and ensiled for preservation.]

BIOGAS FOR ELECTRICITY

Biogas production system | Technological option | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Wet manure | Case 1 | Open digestate | 146 % | 94 %

Close digestate | 246 % | 240 %

Case 2 | Open digestate | 136 % | 85 %

Close digestate | 227 % | 219 %

Case 3 | Open digestate | 142 % | 86 %

Close digestate | 243 % | 235 %

Maize whole plant | Case 1 | Open digestate | 36 % | 21 %

Close digestate | 59 % | 53 %

Case 2 | Open digestate | 34 % | 18 %

Close digestate | 55 % | 47 %

Case 3 | Open digestate | 28 % | 10 %

Close digestate | 52 % | 43 %

Biowaste | Case 1 | Open digestate | 47 % | 26 %

Close digestate | 84 % | 78 %

Case 2 | Open digestate | 43 % | 21 %

Close digestate | 77 % | 68 %

Case 3 | Open digestate | 38 % | 14 %

Close digestate | 76 % | 66 %

BIOGAS FOR ELECTRICITY – MIXTURES OF MANURE AND MAIZE

Biogas production system | Technological option | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Manure – Maize

80 % - 20 %

Case 1 | Open digestate | 72 % | 45 %

Close digestate | 120 % | 114 %

Case 2 | Open digestate | 67 % | 40 %

Close digestate | 111 % | 103 %

Case 3 | Open digestate | 65 % | 35 %

Close digestate | 114 % | 106 %

Manure – Maize

70 % - 30 %

Case 1 | Open digestate | 60 % | 37 %

Close digestate | 100 % | 94 %

Case 2 | Open digestate | 57 % | 32 %

Close digestate | 93 % | 85 %

Case 3 | Open digestate | 53 % | 27 %

Close digestate | 94 % | 85 %

Manure – Maize

60 % - 40 %

Case 1 | Open digestate | 53 % | 32 %

Close digestate | 88 % | 82 %

Case 2 | Open digestate | 50 % | 28 %

Close digestate | 82 % | 73 %

Case 3 | Open digestate | 46 % | 22 %

Close digestate | 81 % | 72 %

[The greenhouse gas emissions savings for biomethane only refer to compressed biomethane relative to the fossil fuel comparator for transport of 94 g CO2eq/MJ.]

BIOMETHANE FOR TRANSPORT

Biomethane production system | Technological options | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Wet manure | Open digestate, no off-gas combustion | 117 % | 72 %

Open digestate, off-gas combustion | 133 % | 94 %

Close digestate, no off-gas combustion | 190 % | 179 %

Close digestate, off-gas combustion | 206 % | 202 %

Maize whole plant | Open digestate, no off-gas combustion | 35 % | 17 %

Open digestate, off-gas combustion | 51 % | 39 %

Close digestate, no off-gas combustion | 52 % | 41 %

Close digestate, off-gas combustion | 68 % | 63 %

Biowaste | Open digestate, no off-gas combustion | 43 % | 20 %

Open digestate, off-gas combustion | 59 % | 42 %

Close digestate, no off-gas combustion | 70 % | 58 %

Close digestate, off-gas combustion | 86 % | 80 %

[The greenhouse gas emissions savings for biomethane only refer to compressed biomethane relative to the fossil fuel comparator for transport of 94 g CO2eq/MJ.] [This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Swing Adsorption (PSA), Pressure Water Scrubbing (PWS), Membranes, Cryogenic, and Organic Physical Scrubbing (OPS). It includes an emission of 0,03 MJ CH4/MJ biomethane for the emission of methane in the off-gases.] [This category includes the following categories of technologies for biogas upgrade to biomethane: Pressure Water Scrubbing (PWS) when water is recycled, Pressure Swing Adsorption (PSA), Chemical Scrubbing, Organic Physical Scrubbing (OPS), Membranes and Cryogenic upgrading. No methane emissions are considered for this category (the methane in the off-gas is combusted, if any).]

BIOMETHANE – MIXTURES OF MANURE AND MAIZE

Biomethane production system | Technological options | Greenhouse gas emissions savings – typical value | Greenhouse gas emissions savings – default value

Manure – Maize

80 % - 20 %

Open digestate, no off-gas combustion | 62 % | 35 %

Open digestate, off-gas combustion | 78 % | 57 %

Close digestate, no off-gas combustion | 97 % | 86 %

Close digestate, off-gas combustion | 113 % | 108 %

Manure – Maize

70 % - 30 %

Open digestate, no off-gas combustion | 53 % | 29 %

Open digestate, off-gas combustion | 69 % | 51 %

Close digestate, no off-gas combustion | 83 % | 71 %

Close digestate, off-gas combustion | 99 % | 94 %

Manure – Maize

60 % - 40 %

Open digestate, no off-gas combustion | 48 % | 25 %

Open digestate, off-gas combustion | 64 % | 48 %

Close digestate, no off-gas combustion | 74 % | 62 %

Close digestate, off-gas combustion | 90 % | 84 %

1.

Greenhouse gas emissions from the production and use of biomass fuels, shall be calculated as follows:

(a)

Greenhouse gas emissions from the production and use of biomass fuels before conversion into electricity, heating and cooling, shall be calculated as:

E = eec + el + ep + etd + eu – esca – eccs – eccr,

Where

Etotal emissions from the production of the fuel before energy conversion;

eecemissions from the extraction or cultivation of raw materials;

elannualised emissions from carbon stock changes caused by land-use change;

epemissions from processing;

etdemissions from transport and distribution;

euemissions from the fuel in use;

escaemission savings from soil carbon accumulation via improved agricultural management;

eccsemission savings from CO2 capture and geological storage; and

eccremission savings from CO2 capture and replacement.

Emissions from the manufacture of machinery and equipment shall not be taken into account.

(b)

In the case of co-digestion of different substrates in a biogas plant for the production of biogas or biomethane, the typical and default values of greenhouse gas emissions shall be calculated as:

where

Egreenhouse gas emissions per MJ biogas or biomethane produced from co-digestion of the defined mixture of substrates

SnShare of feedstock n in energy content

EnEmission in g CO2/MJ for pathway n as provided in Part D of this Annex (*)

where

Pnenergy yield [MJ] per kilogram of wet input of feedstock n (**)

Wnweighting factor of substrate n defined as:

Wn

In

n1In

1AMn1SMn

where:

InAnnual input to digester of substrate n [tonne of fresh matter]

AMnAverage annual moisture of substrate n [kg water/kg fresh matter]

SMnStandard moisture for substrate n (***).

(*) For animal manure used as substrate, a bonus of 45 g CO2eq/MJ manure (– 54 kg CO2eq/t fresh matter) is added for improved agricultural and manure management.

(**) The following values of Pn shall be used for calculating typical and default values:

P(Maize): 4,16 [MJbiogas/kgwet maize @ 65 % moisture]

P(Manure): 0,50 [MJbiogas/kgwet manure @ 90 % moisture]

P(Biowaste) 3,41 [MJbiogas/kgwet biowaste @ 76 % moisture]

(***) The following values of the standard moisture for substrate SMn shall be used:

SM(Maize): 0,65 [kg water/kg fresh matter]

SM(Manure): 0,90 [kg water/kg fresh matter]

SM(Biowaste): 0,76 [kg water/kg fresh matter]

(c)

In the case of co-digestion of n substrates in a biogas plant for the production of electricity or biomethane, actual greenhouse gas emissions of biogas and biomethane are calculated as follows:

E

n1

Sneec,netd,feedstock,nel,nesca,nepetd,producteueccseccr

where

Etotal emissions from the production of the biogas or biomethane before energy conversion;

SnShare of feedstock n, in fraction of input to the digester;

eec,nemissions from the extraction or cultivation of feedstock n;

etd,feedstock,nemissions from transport of feedstock n to the digester;

el,nannualised emissions from carbon stock changes caused by land-use change, for feedstock n;

escaemission savings from improved agricultural management of feedstock n (*);

epemissions from processing;

etd,productemissions from transport and distribution of biogas and/or biomethane;

euemissions from the fuel in use, that is greenhouse gases emitted during combustion;

eccsemission savings from CO2 capture and geological storage; and

eccremission savings from CO2 capture and replacement.

(*) For esca a bonus of 45 g CO2eq/MJ manure shall be attributed for improved agricultural and manure management in the case animal manure is used as a substrate for the production of biogas and biomethane.

(d)

Greenhouse gas emissions from the use of biomass fuels in producing electricity, heating and cooling, including the energy conversion to electricity and/or heat or cooling produced, shall be calculated as follows:

(i)

For energy installations delivering only heat:

ECh

E

ηh

(ii)

For energy installations delivering only electricity:

ECel

E

ηel

where

ECh,elTotal greenhouse gas emissions from the final energy commodity.

ETotal greenhouse gas emissions of the fuel before end-conversion.

ηelThe electrical efficiency, defined as the annual electricity produced divided by the annual fuel input, based on its energy content.

ηhThe heat efficiency, defined as the annual useful heat output divided by the annual fuel input, based on its energy content.

(iii)

For the electricity or mechanical energy coming from energy installations delivering useful heat together with electricity and/or mechanical energy:

ECel

E

ηel

Celηel

CelηelChηh

(iv)

For the useful heat coming from energy installations delivering heat together with electricity and/or mechanical energy:

ECh

E

ηh

Chηh

CelηelChηh

where:

ECh,elTotal greenhouse gas emissions from the final energy commodity.

ETotal greenhouse gas emissions of the fuel before end-conversion.

ηelThe electrical efficiency, defined as the annual electricity produced divided by the annual energy input, based on its energy content.

ηhThe heat efficiency, defined as the annual useful heat output divided by the annual energy input, based on its energy content.

CelFraction of exergy in the electricity, and/or mechanical energy, set to 100 % (Cel = 1).

ChCarnot efficiency (fraction of exergy in the useful heat).

The Carnot efficiency, Ch, for useful heat at different temperatures is defined as:

Ch

ThT0

Th

where:

ThTemperature, measured in absolute temperature (kelvin) of the useful heat at point of delivery.

T0Temperature of surroundings, set at 273,15 kelvin (equal to 0 °C).

If the excess heat is exported for heating of buildings, at a temperature below 150 °C (423,15 kelvin), Ch can alternatively be defined as follows:

ChCarnot efficiency in heat at 150 °C (423,15 kelvin), which is: 0,3546

For the purposes of that calculation, the following definitions apply:

(i)

‘cogeneration’ shall mean the simultaneous generation in one process of thermal energy and electricity and/or mechanical energy;

(ii)

‘useful heat’ shall mean heat generated to satisfy an economical justifiable demand for heat, for heating or cooling purposes;

(iii)

‘economically justifiable demand’ shall mean the demand that does not exceed the needs for heat or cooling and which would otherwise be satisfied at market conditions.

2.

Greenhouse gas emissions from biomass fuels shall be expressed as follows:

(a)

greenhouse gas emissions from biomass fuels, E, shall be expressed in terms of grams of CO2 equivalent per MJ of biomass fuel, g CO2eq/MJ;

(b)

greenhouse gas emissions from heating or electricity, produced from biomass fuels, EC, shall be expressed in terms of grams of CO2 equivalent per MJ of final energy commodity (heat or electricity), g CO2eq/MJ.

When heating and cooling are co-generated with electricity, emissions shall be allocated between heat and electricity (as under point 1(d)), irrespective if the heat is used for actual heating purposes or for cooling. [Heat or waste heat is used to generate cooling (chilled air or water) through absorption chillers. Therefore, it is appropriate to calculate only the emissions associated to the heat produced, per MJ of heat, irrespectively if the end-use of the heat is actual heating or cooling via absorption chillers.]

Where the greenhouse gas emissions from the extraction or cultivation of raw materials eec are expressed in unit g CO2eq/dry-ton of feedstock, the conversion to grams of CO2 equivalent per MJ of fuel, g CO2eq /MJ, shall be calculated as follows [The formula for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec describes cases where feedstock is converted into biofuels in one step. For more complex supply chains, adjustments are needed for calculating greenhouse gas emissions from the extraction or cultivation of raw materials eec for intermediate products.]:

eecfuela

gCO2eq

MJ fuel

ec

eecfeedstocka

gCO2eq

tdry

LHVa

MJ feedstock

t dry feedstock

Fuel feedstock factoraAllocation factor fuela

Where

Allocation factor fuela

Energy in fuel

Energy fuelEnergy in co-products

Fuel feedstock factoraRatio of MJ feedstock required to make 1 MJ fuel

Emissions per dry-ton feedstock shall be calculated as follows:

eecfeedstocka

gCO2eq

tdry

eecfeedstocka

gCO2eq

tmoist

1moisture content

3.

Greenhouse gas emissions savings from biomass fuels shall be calculated as follows:

(a)

greenhouse gas emissions savings from biomass fuels used as transport fuels:

SAVING = (EF(t) – EB)/EF(t)

where

EBtotal emissions from biomass fuels used as transport fuels; and

EF(t)total emissions from the fossil fuel comparator for transport

(b)

greenhouse gas emissions savings from heat and cooling, and electricity being generated from biomass fuels:

SAVING = (ECF(h&c,el) – ECB(h&c,el))/ECF (h&c,el),

where

ECB(h&c,el)total emissions from the heat or electricity,

ECF(h&c,el)total emissions from the fossil fuel comparator for useful heat or electricity.

4.

The greenhouse gases taken into account for the purposes of point 1 shall be CO2, N2O and CH4. For the purposes of calculating CO2 equivalence, those gases shall be valued as follows:

CO2: 1

N2O: 298

CH4: 25

5.

Emissions from the extraction, harvesting or cultivation of raw materials, eec, shall include emissions from the extraction, harvesting or cultivation process itself; from the collection, drying and storage of raw materials; from waste and leakages; and from the production of chemicals or products used in extraction or cultivation. Capture of CO2 in the cultivation of raw materials shall be excluded. Estimates of emissions from agriculture biomass cultivation may be derived from the regional averages for cultivation emissions included in the reports referred to in Article 31(4) of this Directive or the information on the disaggregated default values for cultivation emissions included in this Annex, as an alternative to using actual values. In the absence of relevant information in those reports it is allowed to calculate averages based on local farming practises based for instance on data of a group of farms, as an alternative to using actual values.

Estimates of emissions from cultivation and harvesting of forestry biomass may be derived from the use of averages for cultivation and harvesting emissions calculated for geographical areas at national level, as an alternative to using actual values.

This article is long: the rest is at the official publication.