Art. 1 Directive (EU) 2018/851

Amendments

In forcesince 30 May 2018cited 3×

Directive 2008/98/EC is amended as follows:

(1)

Article 1 is replaced by the following:

This Directive lays down measures to protect the environment and human health by preventing or reducing the generation of waste, the adverse impacts of the generation and management of waste and by reducing overall impacts of resource use and improving the efficiency of such use, which are crucial for the transition to a circular economy and for guaranteeing the Union’s long-term competitiveness.’;

(2)

in Article 2(2), the following point is added:

‘(e) substances that are destined for use as feed materials as defined in point (g) of Article 3(2) of Regulation (EC) No 767/2009 of the European Parliament and of the Council [Regulation (EC) No 767/2009 of the European Parliament and of the Council of 13 July 2009 on the placing on the market and use of feed, amending European Parliament and Council Regulation (EC) No 1831/2003 and repealing Council Directive 79/373/EEC, Commission Directive 80/511/EEC, Council Directives 82/471/EEC, 83/228/EEC, 93/74/EEC, 93/113/EC and 96/25/EC and Commission Decision 2004/217/EC (OJ L 229, 1.9.2009, p. 1).’;] and that do not consist of or contain animal by-products.

(3)

Article 3 is amended as follows:

(a)

the following points are inserted:

‘2a. “non-hazardous waste” means waste which is not covered by point 2;

2b.

“municipal waste” means:

(a)

mixed waste and separately collected waste from households, including paper and cardboard, glass, metals, plastics, bio-waste, wood, textiles, packaging, waste electrical and electronic equipment, waste batteries and accumulators, and bulky waste, including mattresses and furniture;

(b)

mixed waste and separately collected waste from other sources, where such waste is similar in nature and composition to waste from households;

Municipal waste does not include waste from production, agriculture, forestry, fishing, septic tanks and sewage network and treatment, including sewage sludge, end-of-life vehicles or construction and demolition waste.

This definition is without prejudice to the allocation of responsibilities for waste management between public and private actors;

2c.

“construction and demolition waste” means waste generated by construction and demolition activities;’;

(b)

point 4 is replaced by the following:

‘4. “bio-waste” means biodegradable garden and park waste, food and kitchen waste from households, offices, restaurants, wholesale, canteens, caterers and retail premises and comparable waste from food processing plants;’;

(c)

the following point is inserted:

‘4a. “food waste” means all food as defined in Article 2 of Regulation (EC) No 178/2002 of the European Parliament and of the Council [Regulation (EC) No 178/2002 of the European Parliament and of the Council of 28 January 2002 laying down the general principles and requirements of food law, establishing the European Food Safety Authority and laying down procedures in matters of food safety (OJ L 31, 1.2.2002, p. 1).’;] that has become waste;

(d)

point 9 is replaced by the following:

‘9. “waste management” means the collection, transport, recovery (including sorting), and disposal of waste, including the supervision of such operations and the after-care of disposal sites, and including actions taken as a dealer or broker;’;

(e)

in point 12, point (c) is replaced by the following:

‘(c) the content of hazardous substances in materials and products;’;

(f)

the following point is inserted:

‘15a. “material recovery” means any recovery operation, other than energy recovery and the reprocessing into materials that are to be used as fuels or other means to generate energy. It includes, inter alia, preparing for re-use, recycling and backfilling;’;

(g)

the following point is inserted:

‘17a. “backfilling” means any recovery operation where suitable non-hazardous waste is used for purposes of reclamation in excavated areas or for engineering purposes in landscaping. Waste used for backfilling must substitute non-waste materials, be suitable for the aforementioned purposes, and be limited to the amount strictly necessary to achieve those purposes;’;

(h)

the following point is added:

‘21. “extended producer responsibility scheme” means a set of measures taken by Member States to ensure that producers of products bear financial responsibility or financial and organisational responsibility for the management of the waste stage of a product’s life cycle.’;

(4)

in Article 4, the following paragraph is added:

‘3. Member States shall make use of economic instruments and other measures to provide incentives for the application of the waste hierarchy, such as those indicated in Annex IVa or other appropriate instruments and measures.’;

(5)

Article 5 is amended as follows:

(a)

in paragraph 1, the introductory part is replaced by the following:

‘1. Member States shall take appropriate measures to ensure that a substance or object resulting from a production process the primary aim of which is not the production of that substance or object is considered not to be waste, but to be a by-product if the following conditions are met:’;

(b)

paragraph 2 is replaced by the following:

‘2. The Commission may adopt implementing acts in order to establish detailed criteria on the uniform application of the conditions laid down in paragraph 1 to specific substances or objects.

Those detailed criteria shall ensure a high level of protection of the environment and human health and facilitate the prudent and rational utilisation of natural resources.

Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 39(2). When adopting those implementing acts, the Commission shall take as a starting point the most stringent and environmentally protective of any criteria adopted by Member States in accordance with paragraph 3 of this Article and shall prioritise replicable practices of industrial symbiosis in the development of the detailed criteria.’;

(c)

the following paragraph is added:

‘3. Where criteria have not been set at Union level under paragraph 2, Member States may establish detailed criteria on the application of the conditions laid down in paragraph 1 to specific substances or objects.

Member States shall notify the Commission of those detailed criteria in accordance with Directive (EU) 2015/1535 of the European Parliament and of the Council [Directive (EU) 2015/1535 of the European Parliament and of the Council of 9 September 2015 laying down a procedure for the provision of information in the field of technical regulations and of rules on Information Society services (OJ L 241, 17.9.2015, p. 1).’;] where so required by that Directive.

(6)

Article 6 is amended as follows:

(a)

paragraph 1 is amended as follows:

(i)

the introductory part and point (a) are replaced by the following:

‘1. Member States shall take appropriate measures to ensure that waste which has undergone a recycling or other recovery operation is considered to have ceased to be waste if it complies with the following conditions:

(a)

the substance or object is to be used for specific purposes;’;

(ii)

the second subparagraph is deleted;

(b)

paragraphs 2, 3 and 4 are replaced by the following:

‘2. The Commission shall monitor the development of national end-of-waste criteria in Member States, and assess the need to develop Union-wide criteria on this basis. To that end, and where appropriate, the Commission shall adopt implementing acts in order to establish detailed criteria on the uniform application of the conditions laid down in paragraph 1 to certain types of waste.

Those detailed criteria shall ensure a high level of protection of the environment and human health and facilitate the prudent and rational utilisation of natural resources. They shall include:

(a)

permissible waste input material for the recovery operation;

(b)

allowed treatment processes and techniques;

(c)

quality criteria for end-of-waste materials resulting from the recovery operation in line with the applicable product standards, including limit values for pollutants where necessary;

(d)

requirements for management systems to demonstrate compliance with the end-of-waste criteria, including for quality control and self-monitoring, and accreditation, where appropriate; and

(e)

a requirement for a statement of conformity.

Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 39(2).

When adopting those implementing acts, the Commission shall take account of the relevant criteria established by Member States in accordance with paragraph 3 and shall take as a starting point the most stringent and environmentally protective of those criteria.

3.

Where criteria have not been set at Union level under paragraph 2, Member States may establish detailed criteria on the application of the conditions laid down in paragraph 1 to certain types of waste. Those detailed criteria shall take into account any possible adverse environmental and human health impacts of the substance or object and shall satisfy the requirements laid down in points (a) to (e) of paragraph 2.

Member States shall notify the Commission of those criteria in accordance with Directive (EU) 2015/1535 where so required by that Directive.

4.

Where criteria have not been set at either Union or national level under paragraph 2 or 3, respectively, a Member State may decide on a case-by-case basis, or take appropriate measures to verify, that certain waste has ceased to be waste on the basis of the conditions laid down in paragraph 1 and, where necessary, reflecting the requirements laid down in points (a) to (e) of paragraph 2, and taking into account limit values for pollutants and any possible adverse environmental and human health impacts. Such case-by-case decisions are not required to be notified to the Commission in accordance with Directive (EU) 2015/1535.

Member States may make information about case-by-case decisions and about the results of verification by competent authorities publicly available by electronic means.’;

(c)

the following paragraph is added:

‘5. The natural or legal person who:

(a)

uses, for the first time, a material that has ceased to be waste and that has not been placed on the market; or

(b)

places a material on the market for the first time after it has ceased to be waste,

shall ensure that the material meets relevant requirements under the applicable chemical and product related legislation. The conditions laid down in paragraph 1 have to be met before the legislation on chemicals and products applies to the material that has ceased to be waste.’;

(7)

Article 7 is amended as follows:

(a)

in paragraph 1, the first sentence is replaced by the following:

‘1. The Commission is empowered to adopt delegated acts in accordance with Article 38a in order to supplement this Directive by establishing, and reviewing in accordance with paragraphs 2 and 3 of this Article, a list of waste.’;

(b)

paragraph 2 is replaced by the following:

‘2. A Member State may consider waste as hazardous waste where, even though it does not appear as such on the list of waste, it displays one or more of the properties listed in Annex III. The Member State shall notify the Commission of any such cases without delay and provide the Commission with all relevant information. In the light of notifications received, the list shall be reviewed in order to decide on its adaptation.’;

(c)

paragraph 5 is deleted;

(8)

Article 8 is amended as follows:

(a)

in paragraph 1, the following subparagraphs are added:

‘Where such measures include the establishment of extended producer responsibility schemes, the general minimum requirements laid down in Article 8a shall apply.

Member States may decide that producers of products that undertake financial or financial and organisational responsibilities for the management of the waste stage of a product’s life cycle of their own accord should apply some or all of the general minimum requirements laid down in Article 8a.’;

(b)

paragraph 2 is replaced by the following:

‘2. Member States may take appropriate measures to encourage the design of products and components of products in order to reduce their environmental impact and the generation of waste in the course of the production and subsequent use of products, and in order to ensure that the recovery and disposal of products that have become waste take place in accordance with Articles 4 and 13.

Such measures may encourage, inter alia, the development, production and marketing of products and components of products that are suitable for multiple use, that contain recycled materials, that are technically durable and easily reparable and that are, after having become waste, suitable for preparing for re-use and recycling in order to facilitate proper implementation of the waste hierarchy. The measures shall take into account the impact of products throughout their life cycle, the waste hierarchy and, where appropriate, the potential for multiple recycling.’;

(c)

the following paragraph is added:

‘5. The Commission shall organise an exchange of information between Member States and the actors involved in extended producer responsibility schemes on the practical implementation of the general minimum requirements laid down in Article 8a. This includes, inter alia, exchange of information on best practices to ensure adequate governance, cross-border cooperation concerning extended producer responsibility schemes and a smooth functioning of the internal market, on the organisational features and the monitoring of organisations implementing extended producer responsibility obligations on behalf of producers of products, on the modulation of financial contributions, on the selection of waste management operators and on the prevention of littering. The Commission shall publish the results of the exchange of information and may provide guidelines on these and other relevant aspects.

The Commission shall publish guidelines, in consultation with Member States, on cross-border cooperation concerning extended producer responsibility schemes and on the modulation of financial contributions referred to in point (b) of Article 8a(4).

Where necessary to avoid distortion of the internal market, the Commission may adopt implementing acts in order to lay down criteria with a view to the uniform application of point (b) of Article 8a(4), but excluding any precise determination of the level of the contributions. Those implementing acts shall be adopted in accordance with the examination procedure referred to in Article 39(2).’;

(9)

the following article is inserted:

1.

Where extended producer responsibility schemes are established in accordance with Article 8(1), including pursuant to other legislative acts of the Union, Member States shall:

(a)

define in a clear way the roles and responsibilities of all relevant actors involved, including producers of products placing products on the market of the Member State, organisations implementing extended producer responsibility obligations on their behalf, private or public waste operators, local authorities and, where appropriate, re-use and preparing for re-use operators and social economy enterprises;

(b)

in line with the waste hierarchy, set waste management targets, aiming to attain at least the quantitative targets relevant for the extended producer responsibility scheme as laid down in this Directive, Directive 94/62/EC, Directive 2000/53/EC, Directive 2006/66/EC and Directive 2012/19/EU of the European Parliament and of the Council [Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE) (OJ L 197, 24.7.2012, p. 38).’;], and set other quantitative targets and/or qualitative objectives that are considered relevant for the extended producer responsibility scheme;

(c)

ensure that a reporting system is in place to gather data on the products placed on the market of the Member State by the producers of products subject to extended producer responsibility and data on the collection and treatment of waste resulting from those products specifying, where appropriate, the waste material flows, as well as other data relevant for the purposes of point (b);

(d)

ensure equal treatment of producers of products regardless of their origin or size, without placing a disproportionate regulatory burden on producers, including small and medium-sized enterprises, of small quantities of products.

2.

Member States shall take the necessary measures to ensure that the waste holders targeted by the extended producer responsibility schemes established in accordance with Article 8(1), are informed about waste prevention measures, centres for re-use and preparing for re-use, take-back and collection systems, and the prevention of littering. Member States shall also take measures to create incentives for the waste holders to assume their responsibility to deliver their waste into the separate collection systems in place, notably, where appropriate, through economic incentives or regulations.

3.

Member States shall take the necessary measures to ensure that any producer of products or organisation implementing extended producer responsibility obligations on behalf of producers of products:

(a)

has a clearly defined geographical, product and material coverage without limiting those areas to those where the collection and management of waste are the most profitable;

(b)

provides an appropriate availability of waste collection systems within the areas referred to in point (a);

(c)

has the necessary financial means or financial and organisational means to meet its extended producer responsibility obligations;

(d)

puts in place an adequate self-control mechanism, supported, where relevant, by regular independent audits, to appraise:

(i)

its financial management, including compliance with the requirements laid down in points (a) and (b) of paragraph 4;

(ii)

the quality of data collected and reported in accordance with point (c) of paragraph 1 of this Article and with the requirements of Regulation (EC) No 1013/2006;

(e)

makes publicly available information about the attainment of the waste management targets referred to in point (b) of paragraph 1, and, in the case of collective fulfilment of extended producer responsibility obligations, also information about:

(i)

its ownership and membership;

(ii)

the financial contributions paid by producers of products per unit sold or per tonne of product placed on the market; and

(iii)

the selection procedure for waste management operators.

4.

Member States shall take the necessary measures to ensure that the financial contributions paid by the producer of the product to comply with its extended producer responsibility obligations:

(a)

cover the following costs for the products that the producer puts on the market in the Member State concerned:

costs of separate collection of waste and its subsequent transport and treatment, including treatment necessary to meet the Union waste management targets, and costs necessary to meet other targets and objectives as referred to in point (b) of paragraph 1, taking into account the revenues from re-use, from sales of secondary raw material from its products and from unclaimed deposit fees,

costs of providing adequate information to waste holders in accordance with paragraph 2,

costs of data gathering and reporting in accordance with point (c) of paragraph 1.

This point shall not apply to extended producer responsibility schemes established pursuant to Directive 2000/53/EC, 2006/66/EC or 2012/19/EU;

(b)

in the case of collective fulfilment of extended producer responsibility obligations, are modulated, where possible, for individual products or groups of similar products, notably by taking into account their durability, reparability, re-usability and recyclability and the presence of hazardous substances, thereby taking a life-cycle approach and aligned with the requirements set by relevant Union law, and where available, based on harmonised criteria in order to ensure a smooth functioning of the internal market; and

(c)

do not exceed the costs that are necessary to provide waste management services in a cost-efficient way. Such costs shall be established in a transparent way between the actors concerned.

Where justified by the need to ensure proper waste management and the economic viability of the extended producer responsibility scheme, Member States may depart from the division of financial responsibility as laid down in point (a), provided that:

(i)

in the case of extended producer responsibility schemes established to attain waste management targets and objectives established under legislative acts of the Union, the producers of products bear at least 80 % of the necessary costs;

(ii)

in the case of extended producer responsibility schemes established on or after 4 July 2018 to attain waste management targets and objectives solely established in Member State legislation, the producers of products bear at least 80 % of the necessary costs;

(iii)

in the case of extended producer responsibility schemes established before 4 July 2018 to attain waste management targets and objectives solely established in Member State legislation, the producers of products bear at least 50 % of the necessary costs,

and provided that the remaining costs are borne by original waste producers or distributors.

This derogation may not be used to lower the proportion of costs borne by producers of products under extended producer responsibility schemes established before 4 July 2018.

5.

Member States shall establish an adequate monitoring and enforcement framework with a view to ensuring that producers of products and organisations implementing extended producer responsibility obligations on their behalf implement their extended producer responsibility obligations, including in the case of distance sales, that the financial means are properly used and that all actors involved in the implementation of the extended producer responsibility schemes report reliable data.

Where, in the territory of a Member State, multiple organisations implement extended producer responsibility obligations on behalf of producers of products, the Member State concerned shall appoint at least one body independent of private interests or entrust a public authority to oversee the implementation of extended producer responsibility obligations.

Each Member State shall allow the producers of products established in another Member State and placing products on its territory to appoint a legal or natural person established on its territory as an authorised representative for the purposes of fulfilling the obligations of a producer related to extended producer responsibility schemes on its territory.

This article is long: the rest is at the official publication.

  • Raad van State, 13-10-2021, 202004635/1/R1Decision

    … of door opneming via de mond of de huid kanker veroorzaken of de frequentie van kanker kunnen doen toenemen." > Artikel 1 van de richtlijn (EU) 2018/851 van het Europees Parlement en de Raad van 30 mei 2018 tot wijziging van Richtlijn …

    13 Oct 2021 · ECLI:NL:RVS:2021:2282

  • VwGH 29.01.2020, Ra 2019/13/0103Decision

    29 Jan 2020 · JWT_2019130103_20200129L00

  • VwGH Rechtssatz, Ra 2019/13/0103Decision

    29 Jan 2020 · JWR_2019130103_20200129L02