6 SUPPLEMENTAL GUIDELINES FOR DESIGN AND DEPLOYMENT OF TORI LINES, Regulation (EU) 2017/2107

In forcesince 15 Jul 2019

Minimum technical standards for deployment of tori lines are found in the Table above. These supplemental guidelines are designed to assist in preparation and implementation of tori line regulations for longline vessels. While these guidelines are relatively explicit, improvement in tori line effectiveness through experimentation is encouraged, within the requirements of the Table above. The guidelines take into account environmental and operational variables such as weather conditions, setting speed and ship size, all of which influence tori line performance and design in protecting baits from birds. Tori line design and use may change to take account of these variables provided that line performance is not compromised. Ongoing improvement in tori line design is envisaged and consequently review of these guidelines should be undertaken in the future.

1.

An appropriate towed device on the section of the tori line in the water can improve the aerial extension.

2.

The above water section of the line should be sufficiently light that its movement is unpredictable to avoid habituation by birds and sufficiently heavy to avoid deflection of the line by wind.

3.

The line is best attached to the vessel with a robust barrel swivel to reduce tangling of the line.

4.

The streamers should be made of material that is conspicuous and produces an unpredictable lively action (e.g. strong fine line sheathed in red polyurethane tubing) suspended from a robust three-way swivel (that again reduces tangles) attached to the tori line.

5.

Each streamer should consist of two or more strands.

6.

Each streamer pair should be detachable by means of a clip so that line stowage is more efficient.

1.

The line should be suspended from a pole affixed to the vessel. The tori pole should be set as high as possible so that the line protects bait a good distance astern of the vessel and will not tangle with fishing gear. Greater pole height provides greater bait protection. For example, a height of around 7 m above the water line can give about 100 m of bait protection.

2.

If vessels use only one tori line it should be set to windward of sinking baits. If baited hooks are set outboard of the wake, the tori line attachment point to the vessel should be positioned several metres outboard of the side of the vessel that baits are deployed. If vessels use two tori lines, baited hooks should be deployed within the area bounded by the two tori lines.

3.

Deployment of multiple tori lines is encouraged to provide even greater protection of baits from birds.

4.

Because of the potential for line breakage and tangling, spare tori lines should be carried on board to replace damaged lines and to ensure fishing operations can continue uninterrupted. Breakaways can be incorporated into the tori line to minimise safety and operational problems should a longline float foul or tangle with the in-water extent of a tori line.

5.

When fishermen use a bait casting machine (BCM), they must ensure coordination of tori line and machine by ensuring that a BCM throws directly under the tori line protection. When using a BCM (or multiple BCMs) that allows throwing to both port and starboard, two tori lines should be used.

6.

When casting branchline by hand, fishermen should ensure that the baited hooks and coiled branchline sections are cast under the tori line protection, avoiding the propeller turbulence which may slow the sink rate.

7.

Fishermen are encouraged to install manual, electric or hydraulic winches to improve ease of deployment and retrieval of tori lines.