68 3. MEASURES, Regulation (EU) 2017/271

In forcesince 16 Feb 2017

The applicant maintained and reiterated after disclosure that no workable dividing line could be drawn based on the above criteria and hence this would have created a disproportionate risk of circumvention. It argued that aluminium foils were interchangeable and that some AHF might be produced using the same aluminium foils as it was generally used to produce ACF. In particular it pointed to the alloys 8011 and 8079. Regarding the number of pinholes the applicant submitted that these were not a regulated requirement and generally based on an agreement between seller and buyer. Regarding the wettability criterion the applicant also argued that it was not a decisive factor to determine whether an aluminium foil was ACF. During the hearing after disclosure it also argued that even the cumulative application of the three criteria was not workable to establish the desired distinction. Even if all the three criteria for ACF were fulfilled, imports could still be used as household foil and distort competition. In the applicant's opinion the only way to differentiate between AHF and ACF was by its end-use. Following the additional disclosure the applicant submitted that the exporting producers exempted in accordance with Article 13(4) of the basic Regulation should be subject to end-use procedure in accordance with Article 254 of the Union Customs Code in order to prevent any future circumvention of the measures.