Information document No … relating to the EC type-approval of a 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component (3).
The following information shall be supplied in triplicate and include a list of contents. Any drawings shall be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, shall show sufficient detail.
If the separate technical unit or component referred to in this information document have electronic controls, information concerning their performance shall be supplied.
0.1.
Make (trade name of manufacturer): …
0.2.
Type: …
0.3.
Means of identification of type, if marked on the Separate Technical Unit (1): …
0.3.1.
Location of that marking: …
0.4.
In case of STU, intended for category of vehicle (2): …
0.5.
Company name and address of manufacturer: …
0.7.
Location and method of affixing of the EC approval mark: …
0.9.
Name and address of the manufacturer's representative (if any): …
12.8.
eCall system
12.8.2.
Technical description and/or schematic drawings: …
12.8.3.1.
Photographs and/or drawings in sufficient detail and to an appropriate scale to enable the STU or component to be identified. The drawings must show the intended position of the STU or component on the vehicle and the space intended for the EC type-approval mark of the STU or component: …
12.8.3.1.1.
Instructions for installation in the vehicle, including the position and orientation of the 112-based eCall in-vehicle system component: …
12.8.3.1.2.
Location and method of mounting the 112-based eCall in-vehicle STU in the vehicle: …
12.8.3.2.
List of the main constituent parts of the STU or component: …
12.8.7.
Declaration of conformity with the standards referred to in Article 5(8) of Regulation (EU) 2015/758: yes/no (3).
If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).
As defined in Section A of Annex II to Directive 2007/46/EC.
Delete where not applicable.
Stamp of type-approval authority
Communication concerning:
[Delete where not applicable.]
EC type-approval
extension of EC type-approval
refusal of EC type-approval
withdrawal of EC type-approval
of 112-based eCall in-vehicle STU/ 112-based eCall in-vehicle system component
with regard to Regulation (EU) 2015/758.
EC type-approval number: …
Reason for extension: …
0.1.
Make (trade name of manufacturer): …
0.2.
Type: …
0.3.
Means of identification of type if marked on the separate technical unit/component [If the means of identification of type contains characters not relevant to describe the vehicle, component or separate technical unit types covered by this information document, such characters shall be represented in the documentation by the symbol ‘?’ (e.g. ABC??123??).]: …
0.3.1.
Location of that marking: …
0.4.
In case of separate technical unit, intended for category of vehicle (3): …
0.5.
Name and address of manufacturer: …
0.7.
Location and method of affixing of the EC approval mark: …
0.9.
Name and address of the manufacturer's representative (if any): …
1.
Additional information (where applicable): see Addendum
2.
Technical service responsible for carrying out the tests: …
3.
Date of test report: …
4.
Number of test report: …
5.
Remarks (if any): see Addendum.
6.
Place: …
7.
Date: …
8.
Signature: …
Attachments: |
Information package.
Test report.
1.
The EC component and separate technical unit type-approval mark shall consist of:
1.1.
A rectangle surrounding the lower-case letter ‘e’ followed by the distinguishing number of the Member State which has granted the EC component or separate technical unit type-approval:
1 | for Germany | 12 | for Austria | 26 | for Slovenia
2 | for France | 13 | for Luxembourg | 27 | for Slovakia
3 | for Italy | 17 | for Finland | 29 | for Estonia
4 | for the Netherlands | 18 | for Denmark | 32 | for Latvia
5 | for Sweden | 19 | for Romania | 34 | For Bulgaria
6 | for Belgium | 20 | for Poland | 36 | For Lithuania
7 | for Hungary | 21 | for Portugal | 49 | For Cyprus
8 | for the Czech Republic | 23 | for Greece | 50 | For Malta
9 | for Spain | 24 | for Ireland | |
11 | for the United Kingdom | 25 | for Croatia | |
1.2.
In the vicinity of the rectangle the ‘base approval number’ contained in Section 4 of the type-approval number preceded by the two figures indicating the sequence number assigned to this Regulation. The sequence number is ‘00’ at present.
1.3.
In case of a 112-based eCall in-vehicle STU, in the vicinity of the rectangle the sequence number shall be preceded by the symbol ‘ECALL’.
2.
The EC type-approval mark is affixed to a main part of the 112-based eCall in-vehicle STU or 112-based eCall in-vehicle system component in such a way as to be indelible as well as clearly and easily legible.
3.
Example of EC type-approval marks for 112-based eCall in-vehicle STUs and 112-based eCall in-vehicle system components is shown respectively in Figure 1 and Figure 2.
LegendThe EC separate technical unit type-approval was issued by Bulgaria under number 0046. The first two digits ‘00’ indicate that the separate technical unit was approved according to this Regulation.
LegendThe EC component type-approval was issued by Germany under number 00026. The first two digits ‘00’ indicate that the component was approved according to this Regulation.