ANNEX II, Regulation (EU) 2016/1076

In forcesince 16 Sep 2017

Article 1

Definitions

For the purposes of this Annex, the following definitions apply:

(a)

‘manufacture’ means any kind of working or processing including assembly or specific operations;

(b)

‘material’ means any ingredient, raw material, component or part, etc., used in the manufacture of the product;

(c)

‘product’ means the product being manufactured, even if it is intended for later use in another manufacturing operation;

(d)

‘goods’ means both materials and products;

(e)

‘customs value’ means the value as determined in accordance with the Agreement on implementation of Article VII of the GATT 1994 (WTO Agreement on customs valuation);

(f)

‘ex-works price’ means the price paid for the product ex works to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the materials used, minus any internal taxes which are, or may be, repaid when the product obtained is exported;

(g)

‘value of materials’ means the customs value at the time of importation of the non-originating materials used, or, if this is not known and cannot be ascertained, the first ascertainable price paid for the materials in the territory concerned;

(h)

‘value of originating materials’ means the value of such materials as defined in point (g) applied mutatis mutandis;

(i)

‘added value’ means the ex-works price minus the customs value of materials imported into either the Union or the ACP States;

(j)

‘chapters’ and ‘headings’ mean the chapters and the headings (four-digit codes) used in the nomenclature which makes up the Harmonised Commodity Description and Coding System, referred to in this Annex as ‘the Harmonised System’ or ‘HS’;

(k)

‘classified’ refers to the classification of a product or material under a particular heading;

(l)

‘consignment’ means products which are either sent simultaneously from one exporter to one consignee or covered by a single transport document covering their shipment from the exporter to the consignee or, in the absence of such a document, by a single invoice;

(m)

‘territories’ means territories, including territorial waters;

(n)

‘OCT’ means the overseas countries and territories as defined in Appendix 12.

Article 2

General requirements

1.

For the purposes of this Regulation, the following products shall be considered as originating in the ACP States listed in Annex I, hereinafter, for the purpose of this Annex, referred to as ‘ACP States’:

(a)

products wholly obtained in the ACP States within the meaning of Article 3 of this Annex;

(b)

products obtained in the ACP States incorporating materials which have not been wholly obtained there, provided that such materials have undergone sufficient working or processing in the ACP States within the meaning of Article 4 of this Annex.

2.

For the purpose of the implementation of paragraph 1, the territories of the ACP States shall be considered as being one territory.

Originating products made up of materials wholly obtained or sufficiently worked or processed in two or more ACP States shall be considered as products originating in the ACP State where the last working or processing took place, provided the working or processing carried out there goes beyond the operations referred to in Article 5 of this Annex.

3.

For products listed in Appendix 10, paragraph 2 shall apply only after 1 October 2015.

Article 3

Wholly obtained products

1.

The following shall be considered as wholly obtained in the ACP States or in the Union:

(a)

mineral products extracted from their soil or from their seabed;

(b)

vegetable products harvested there;

(c)

live animals born and raised there;

(d)

products from live animals raised there;

(e)

products obtained by hunting or fishing conducted there;

(f)

products of aquaculture, including mariculture, where the fish are born and raised there;

(g)

products of sea fishing and other products taken from the sea outside the territorial waters by their vessels;

(h)

products made aboard their factory ships exclusively from products referred to in point (g);

(i)

used articles collected there fit only for the recovery of raw materials, including used tyres fit only for retreading or for use as waste;

(j)

waste and scrap resulting from manufacturing operations conducted there;

(k)

products extracted from marine soil or subsoil outside their territorial waters provided that they have sole rights to work that soil or subsoil;

(l)

goods produced there exclusively from the products specified in points (a) to (k).

2.

The terms ‘their vessels’ and ‘their factory ships’ in points (g) and (h) of paragraph 1 shall apply only to vessels and factory ships which:

(a)

are registered in a Member State or in an ACP State;

(b)

fly the flag of a Member State or of an ACP State;

(c)

meet one of the following conditions:

(i)

they are at least 50 % owned by nationals of the ACP State or of a Member State; or

(ii)

they are owned by companies which;

have their head office and their main place of business in the ACP State or in a Member State, and

are at least 50 % owned by the ACP State, public entities of that State or nationals of that State or of a Member State.

3.

Notwithstanding paragraph 2, the Union shall, upon request by an ACP State, recognise vessels chartered or leased by the ACP State to undertake fisheries activities in its exclusive economic zone as ‘their vessels’ under the following conditions:

(a)

that the ACP State offered the Union the opportunity to negotiate a fisheries agreement and the Union did not accept that offer;

(b)

that the charter or lease contract has been accepted by the Commission as providing adequate opportunities for the development of the capacity of the ACP State to fish on its own account and in particular as conferring on the ACP State the responsibility for the nautical and commercial management of the vessel placed at its disposal for a significant period of time.

Article 4

Sufficiently worked or processed products

1.

For the purposes of this Annex, products which are not wholly obtained shall be considered to be sufficiently worked or processed in the ACP States or in the Union, when the conditions set out in the list in Appendix 2 or in Appendix 2A are fulfilled. Those conditions indicate, for all products covered by this Regulation, the working or processing which must be carried out on non-originating materials used in manufacturing and apply only in relation to such materials. Accordingly, it follows that if a product, which has acquired originating status by fulfilling the conditions set out in the list is used in the manufacture of another product, the conditions applicable to the product in which it is incorporated do not apply to it, and no account shall be taken of the non-originating materials which may have been used in its manufacture.

2.

Notwithstanding paragraph 1, non-originating materials which, according to the conditions set out in Appendices 2 and 2A, should not be used in the manufacture of a given product may nevertheless be used, provided that:

(a)

their total value does not exceed 15 % of the ex-works price of the product;

(b)

none of the percentages given in the list for the maximum value of non-originating materials are exceeded through the application of this paragraph.

This paragraph shall not apply to products falling within Chapters 50 to 63 of the Harmonised System.

3.

(a) Notwithstanding paragraph 1 and after prior notification of the Commission by a Pacific ACP State, processed fishery products of headings 1604 and 1605 processed or manufactured in on-land premises in that State from non-originating materials of heading 0302 or 0303 that have been landed in a port of that State shall be considered as sufficiently worked or processed for the purposes of Article 2. The notification to the Commission shall indicate the development benefits to the fisheries sector in that State, and shall include the necessary information concerning the species concerned, the products to be manufactured and an indication of the respective quantities to be involved.

(b)

A report to the Union on the implementation of point (a) shall be drawn up by the Pacific ACP State no later than three years after the notification.

(c)

Point (a) shall apply without prejudice to sanitary and phytosanitary measures in force in the Union, effective conservation and sustainable management of fishing resources and support to combat illegal, unreported and unregulated fishing activities in the region.

4.

Paragraphs 1, 2 and 3 shall apply except as provided for in Article 5.

Article 5

Insufficient working or processing operations

1.

Without prejudice to paragraph 2, the following operations shall be considered as insufficient working or processing to confer the status of originating products, whether or not the requirements of Article 4 are satisfied:

(a)

preserving operations to ensure that the products remain in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts and like operations);

(b)

simple operations consisting of the removal of dust, sifting or screening, sorting, classifying, matching (including the making-up of sets of articles), washing, painting, cutting up;

(c)

changes of packaging and breaking up and assembly of packages;

(d)

simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc., and all other simple packaging operations;

(e)

affixing marks, labels and other like distinguishing signs on products or their packaging;

(f)

simple mixing of products, whether or not of different kinds; mixing of sugar with any other material;

(g)

simple assembly of parts to constitute a complete product;

(h)

a combination of two or more of the operations specified in points (a) to (g);

(i)

slaughter of animals;

(j)

husking, partial or total bleaching, polishing and glazing of cereals and rice;

(k)

operations to colour sugar or form sugar lumps; partial or total milling of sugar;

(l)

peeling, stoning and shelling of fruits, nuts and vegetables.

2.

All the operations carried out in either the ACP States or the Union on a given product shall be considered together when determining whether the working or processing undergone by that product is to be regarded as insufficient within the meaning of paragraph 1.

Article 6

Cumulation of origin

1.

Materials originating in the Union or in the OCT shall be considered as materials originating in the ACP States when incorporated into a product obtained there. It shall not be necessary for such materials to have undergone sufficient working or processing, provided they have undergone working or processing beyond that referred to in Article 5.

2.

Working and processing carried out in the Union or in the OCT shall be considered as having been carried out in the ACP States when the materials undergo subsequent working or processing in the ACP States beyond that referred to in Article 5.

3.

For the purpose of determining whether the products originate in the OCT, the provisions of this Annex shall apply mutatis mutandis.

4.

For products listed in Appendix 10, the provisions of this Article shall apply only after 1 October 2015.

5.

Subject to the provisions of paragraphs 6, 7, 8 and 11, materials originating in South Africa shall be considered as originating in the ACP States when incorporated into a product obtained there provided they have undergone working or processing beyond that referred to in Article 5. It shall not be necessary for such materials to have undergone sufficient working or processing.

6.

Products which have acquired originating status by virtue of paragraph 5 shall continue to be considered as products originating in the ACP States only when the value added there exceeds the value of the materials used that originate in South Africa. If that is not so, the products concerned shall be considered as originating in South Africa. In the allocation of origin, no account shall be taken of materials originating in South Africa which have undergone sufficient working or processing in the ACP States.

7.

The cumulation provided for in paragraph 5 shall not apply to the products listed in Appendices 7, 10 and 11.

8.

The cumulation provided for in paragraph 5 shall apply to the products listed in Appendix 8 only when the tariffs on those products in the framework of the TDCA have been eliminated. The Commission shall publish the date on which the conditions of this paragraph have been fulfilled in the Official Journal of the European Union (C series).

9.

Without prejudice to paragraphs 7 and 8, working and processing carried out in South Africa shall be considered as having been carried out in another Member State of the South African Customs Union (SACU), being an ACP State, when the materials undergo subsequent working or processing in that other Member State of the SACU.

10.

Without prejudice to paragraphs 7 and 8 and at the request of the ACP States, working and processing carried out in South Africa shall be considered as having been carried out in the ACP States when the materials undergo subsequent working or processing in an ACP State within the context of a regional economic integration agreement.

11.

The requests of the ACP States shall be decided on in accordance with the examination procedure referred to in Article 19(5) of this Regulation.

12.

The cumulation provided for in paragraph 5 may be applied only where the South African materials used have acquired the status of originating products through the application of rules of origin identical to those set out in this Annex. The cumulation provided for in paragraphs 9 and 10 may be applied only through the application of rules of origin identical to those set out in this Annex.

13.

At the request of the ACP States, materials originating in a neighbouring developing country, other than an ACP State, belonging to a coherent geographical entity, shall be considered as materials originating in the ACP States when incorporated into a product obtained there. It shall not be necessary for such materials to have undergone sufficient working or processing, provided that:

the working or processing carried out in the ACP State exceeds the operations listed in Article 5,

the ACP States, the Union and the other countries concerned have concluded an agreement on adequate administrative procedures which will ensure correct implementation of this paragraph.

This paragraph shall not apply to tuna products classified under Harmonised System Chapter 3 or 16 and to rice products under tariff heading 1006.

For the purpose of determining whether products originate in a neighbouring developing country, the provisions of this Annex shall apply.

The requests of the ACP States shall be decided on in accordance with the examination procedure referred to in Article 19(5) of this Regulation. Such decisions shall also identify the products for which cumulation provided for under this paragraph may not be permitted.

Article 7

Unit of qualification

1.

The unit of qualification for the application of this Annex shall be the particular product which is considered as the basic unit when determining classification using the nomenclature of the Harmonised System.

This means that:

(a)

when a product composed of a group or assembly of articles is classified under the terms of the Harmonised System in a single heading, the whole shall constitute the unit of qualification;

(b)

when a consignment consists of a number of identical products classified under the same heading of the Harmonised System, each product shall be taken individually when this Annex is applied.

2.

Where, under General Rule 5 of the Harmonised System, packaging is included with the product for classification purposes, it shall be included for the purposes of determining origin.

Article 8

Accessories, spare parts and tools

Accessories, spare parts and tools dispatched with a piece of equipment, machine, apparatus or vehicle, which are part of the normal equipment and included in the price thereof or which are not separately invoiced, shall be regarded as one with the piece of equipment, machine, apparatus or vehicle in question.

Article 9

Sets

Sets, as defined in General Rule 3 of the Harmonised System, shall be regarded as originating when all the component products are originating. Nevertheless, when a set is composed of originating and non-originating products, the set as a whole shall be regarded as originating, provided that the value of the non-originating products does not exceed 15 % of the ex-works price of the set.

Article 10

Neutral elements

In order to determine whether a product is an originating product, it shall not be necessary to determine the origin of the following which might be used in its manufacture:

(a)

energy and fuel;

(b)

plant and equipment;

(c)

machines and tools;

(d)

goods which do not enter and which are not intended to enter into the final composition of the product.

Article 11

Principle of territoriality

1.

Except as provided for in Article 6, the conditions for acquiring originating status set out in Title II shall be fulfilled without interruption in the ACP States.

2.

Except as provided for in Article 6, if originating goods exported from the ACP States, the Union or the OCT to another country return, they shall be considered as non-originating, unless it can be demonstrated to the satisfaction of the customs authorities that:

(a)

the returning goods are the same goods as those exported; and

(b)

they have not undergone any operation beyond that necessary to preserve them in good condition while in that country or while being exported.

Article 12

Direct transport

1.

The preferential treatment provided for in this Regulation shall apply only to products that satisfy the requirements of this Annex and are transported directly between the territory of the ACP States, of the Union, of the OCT or of South Africa for the purposes of Article 6 without entering any other territory. However, products constituting one single consignment may be transported through other territories with, should the occasion arise, transhipment or temporary warehousing in such territories, provided that they remain under the surveillance of the customs authorities in the country of transit or warehousing and do not undergo operations other than unloading, reloading or any operation designed to preserve them in good condition.

Originating products may be transported by pipeline across territory other than that of an ACP State or of the Union.

2.

Evidence that the conditions set out in paragraph 1 have been fulfilled shall be supplied to the customs authorities of the importing country by the production of:

(a)

a single transport document covering the passage from the exporting country through the country of transit; or

(b)

a certificate issued by the customs authorities of the country of transit:

(i)

giving an exact description of the products;

(ii)

stating the dates of unloading and reloading of the products and, where applicable, the names of the ships, or the other means of transport used; and

(iii)

certifying the conditions under which the products remained in the transit country;

or

(c)

failing those, any substantiating documents.

Article 13

Exhibitions

1.

Originating products sent from an ACP State for exhibition in a country or a territory other than those referred to in Article 6 and sold after the exhibition for importation into the Union shall benefit on importation from the provisions of this Regulation provided it is shown to the satisfaction of the customs authorities that:

(a)

an exporter has consigned those products from an ACP State to the country or territory in which the exhibition is held and has exhibited them there;

(b)

the products have been sold or otherwise disposed of by that exporter to a person in the Union;

(c)

the products have been consigned during the exhibition or immediately thereafter in the state in which they were sent for exhibition; and

(d)

the products have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.

2.

A proof of origin shall be issued or made out in accordance with the provisions of Title IV and submitted to the customs authorities of the importing country in the normal manner. The name and address of the exhibition shall be indicated thereon. Where necessary, additional documentary evidence of the conditions under which they have been exhibited may be required.

3.

Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organised for private purposes in shops or business premises with a view to the sale of foreign products and during which the products remain under customs control.

Article 14

General requirements

1.

Products originating in the ACP States shall, on importation into the Union, benefit from the provisions of this Regulation upon submission of either:

(a)

a movement certificate EUR.1, a specimen of which appears in Appendix 3; or

(b)

in the cases specified in Article 19(1), a declaration, hereinafter referred to as the ‘invoice declaration’, given by the exporter on an invoice, a delivery note or any other commercial document which describes the products concerned in sufficient detail to enable them to be identified. The text of the invoice declaration appears in Appendix 4.

2.

Notwithstanding paragraph 1, originating products within the meaning of this Annex shall, in the cases specified in Article 25, benefit from the provisions of this Regulation without it being necessary to submit any of the documents referred to in that paragraph.

Article 15

Procedure for the issue of a movement certificate EUR.1

1.

A movement certificate EUR.1 shall be issued by the customs authorities of the exporting country on application having been made in writing by the exporter or, under the exporter's responsibility, by the authorised representative of the exporter.

2.

For that purpose, the exporter or the authorised representative of the exporter shall fill out both the movement certificate EUR.1 and the application form, specimens of which appear in Appendix 3. Those forms shall be completed in accordance with the provisions of this Annex. If they are handwritten, they shall be completed in ink in printed characters. The description of the products shall be given in the box reserved for that purpose without leaving any blank lines. Where the box is not completely filled, a horizontal line shall be drawn below the last line of the description, the empty space being crossed through.

This article is long: the rest is at the official publication.