ANNEX III, Regulation (EU) 2015/1861

In force

This Annex comprises the following items listed in the Missile Technology Control Regime, as defined therein. The introductory remarks (section 1) should be read as a tool to interpret the exact specifications of the items listed; they do not call into question the prohibition on the export of these items to Iran as provided by Article 4.

(a)

This Annex consists of two categories of items, which term includes equipment, materials, “software” or “technology”. Category I items, all of which are in Annex Items 1 and 2, are those items of greatest sensitivity. If a Category I item is included in a system, that system will also be considered as Category I, except when the incorporated item cannot be separated, removed or duplicated. Category II items are those items in the Annex not designated Category I.

(b)

In reviewing the proposed applications for transfers of complete rocket and unmanned aerial vehicle systems described in Items 1 and 19, and of equipment, materials, “software” or “technology” which is listed in the Technical Annex, for potential use in such systems, the Government will take account of the ability to trade off “range” and “payload”.

The transfer of “technology” directly associated with any goods controlled in the Annex is controlled according to the provisions in each Item to the extent permitted by national legislation. The approval of any Annex item for export also authorizes the export to the same end-user of the minimum “technology” required for the installation, operation, maintenance, or repair of the item.

Controls do not apply to “technology” “in the public domain” or to “basic scientific research”.

The Annex does not control “software” which is either:

1.

Generally available to the public by being:

a.

Sold from stock at retail selling points without restriction, by means of:

1.

Over-the-counter transactions;

2.

Mail order transactions; or

3.

Electronic transactions; or

4.

Telephone call transactions; and

b.

Designed for installation by the user without further substantial support by the supplier; or

2.

“In the public domain”.

The General Software Note only applies to general purpose, mass market “software”.

In some instances chemicals are listed by name and CAS number.

Chemicals of the same structural formula (including hydrates) are controlled regardless of name or CAS number. CAS numbers are shown to assist in identifying whether a particular chemical or mixture is controlled, irrespective of nomenclature. CAS numbers cannot be used as unique identifiers because some forms of the listed chemical have different CAS numbers, and mixtures containing a listed chemical may also have different CAS numbers.

For the purpose of this Annex, the following definitions apply:

“Accuracy”Usually measured in terms of inaccuracy, means the maximum deviation, positive or negative, of an indicated value from an accepted standard or true value.

“Basic scientific research”Experimental or theoretical work undertaken principally to acquire new knowledge of the fundamental principles of phenomena or observable facts, not primarily directed towards a specific practical aim or objective.

“Development”

Is related to all phases prior to “production” such as:

design

design research

design analysis

design concepts

assembly and testing of prototypes

pilot production schemes

design data

process of transforming design data into a product

configuration design

integration design

layouts

“In the public domain”This means “software” or “technology” which has been made available without restrictions upon its further dissemination. (Copyright restrictions do not remove “software” or “technology” from being “in the public domain”.)

“Microcircuit”A device in which a number of passive and/or active elements are considered as indivisibly associated on or within a continuous structure to perform the function of a circuit.

“Microprogrammes”A sequence of elementary instructions maintained in a special storage, the execution of which is initiated by the introduction of its reference instruction register.

“Payload”

The total mass that can be carried or delivered by the specified rocket system or unmanned aerial vehicle (UAV) system that is not used to maintain flight.

The particular equipment, subsystems, or components to be included in the “payload” depends on the type and configuration of the vehicle under consideration.

1.

Ballistic Missiles

a.

“Payload” for systems with separating re-entry vehicles (RVs) includes:

1.

The RVs, including:

a.

Dedicated guidance, navigation, and control equipment;

b.

Dedicated countermeasures equipment;

2.

Munitions of any type (e.g. explosive or non-explosive);

3.

Supporting structures and deployment mechanisms for the munitions (e.g. hardware used to attach to, or separate the RV from, the bus/post- boost vehicle) that can be removed without violating the structural integrity of the vehicle;

4.

Mechanisms and devices for safing, arming, fuzing or firing;

5.

Any other countermeasures equipment (e.g. decoys, jammers or chaff dispensers) that separate from the RV bus/post-boost vehicle;

6.

The bus/post-boost vehicle or attitude control/velocity trim module not including systems/subsystems essential to the operation of the other stages.

b.

“Payload” for systems with non-separating re-entry vehicles includes:

1.

Munitions of any type (e.g. explosive or non-explosive);

2.

Supporting structures and deployment mechanisms for the munitions that can be removed without violating the structural integrity of the vehicle;

3.

Mechanisms and devices for safing, arming, fuzing or firing;

4.

Any countermeasures equipment (e.g. decoys, jammers or chaff dispensers) that can be removed without violating the structural integrity of the vehicle.

2.

Space Launch Vehicles

“Payload” includes:

a.

Spacecraft (single or multiple), including satellites;

b.

Spacecraft-to-launch vehicle adapters including, if applicable, apogee/perigee kick motors or similar manoeuvering systems and separation systems.

3.

Sounding Rockets

“Payload” includes:

a.

Equipment required for a mission, such as data gathering, recording or transmitting devices for mission-specific data;

b.

Recovery equipment (e.g. parachutes) that can be removed without violating the structural integrity of the vehicle.

4.

Cruise Missiles

“Payload” includes:

a.

Munitions of any type (e.g. explosive or non-explosive);

b.

Supporting structures and deployment mechanisms for the munitions that can be removed without violating the structural integrity of the vehicle;

c.

Mechanisms and devices for safing, arming, fuzing or firing;

d.

Countermeasures equipment (e.g. decoys, jammers or chaff dispensers) that can be removed without violating the structural integrity of the vehicle;

e.

Signature alteration equipment that can be removed without violating the structural integrity of the vehicle.

5.

Other UAVs

“Payload” includes:

a.

Munitions of any type (e.g. explosive or non-explosive);

b.

Mechanisms and devices for safing, arming, fuzing or firing;

c.

Countermeasures equipment (e.g. decoys, jammers or chaff dispensers) that can be removed without violating the structural integrity of the vehicle;

d.

Signature alteration equipment that can be removed without violating the structural integrity of the vehicle;

e.

Equipment required for a mission such as data gathering, recording or transmitting devices for mission-specific data and supporting structures that can be removed without violating the structural integrity of the vehicle;

f.

Recovery equipment (e.g. parachutes) that can be removed without violating the structural integrity of the vehicle.

g.

Munitions supporting structures and deployment mechanisms that can be removed without violating the structural integrity of the vehicle.

“Production”

Means all production phases such as:

production engineering

manufacture

integration

assembly (mounting)

inspection

testing

quality assurance

“Production equipment”Means tooling, templates, jigs, mandrels, moulds, dies, fixtures, alignment mechanisms, test equipment, other machinery and components therefor, limited to those specially designed or modified for “development” or for one or more phases of “production”.

“Production facilities”Means “production equipment” and specially designed “software” therefor integrated into installations for “development” or for one or more phases of “production”.

“Programmes”A sequence of instructions to carry out a process in, or convertible into, a form executable by an electronic computer.

“Radiation hardened”Means that the component or equipment is designed or rated to withstand radiation levels which meet or exceed a total irradiation dose of 5 × 105 rads (Si).

“Range”

The maximum distance that the specified rocket system or unmanned aerial vehicle (UAV) system is capable of travelling in the mode of stable flight as measured by the projection of its trajectory over the surface of the Earth.

1.

The maximum capability based on the design characteristics of the system, when fully loaded with fuel or propellant, will be taken into consideration in determining “range”.

2.

The “range” for both rocket systems and UAV systems will be determined independently of any external factors such as operational restrictions, limitations imposed by telemetry, data links or other external constraints.

3.

For rocket systems, the “range” will be determined using the trajectory that maximises “range”, assuming ICAO standard atmosphere with zero wind.

4.

For UAV systems, the “range” will be determined for a one-way distance using the most fuel-efficient flight profile (e.g. cruise speed and altitude), assuming ICAO standard atmosphere with zero wind.

“Software”A collection of one or more “programmes”, or “micro-programmes”, fixed in any tangible medium of expression.

“Technology”Means specific information which is required for the “development”, “production” or “use” of a product. The information may take the form of “technical data” or “technical assistance”.

“Technical assistance”

May take forms such as:

instruction

skills

training

working knowledge

consulting services

“Technical data”

May take forms such as:

blueprints

plans

diagrams

models

formulae

engineering designs and specifications

manuals and instructions written or recorded on other media or devices such as:

disk

tape

read-only memories

“Use”

Means:

operation

installation (including on-site installation)

maintenance

repair

overhaul

refurbishing

Where the following terms appear in the text, they are to be understood according to the explanations below:

(a)

“Specially designed” describes equipment, parts, components, materials or “software” which, as a result of “development”, have unique properties that distinguish them for certain predetermined purposes. For example, a piece of equipment that is “specially designed” for use in a missile will only be considered so if it has no other function or use. Similarly, a piece of manufacturing equipment that is “specially designed” to produce a certain type of component will only be considered such if it is not capable of producing other types of components.

(b)

“Designed or modified” describes equipment, parts or components which, as a result of “development,” or modification, have specified properties that make them fit for a particular application. “Designed or modified” equipment, parts, components or “software” can be used for other applications. For example, a titanium coated pump designed for a missile may be used with corrosive fluids other than propellants.

(c)

“Usable in”, “usable for”, “usable as” or “capable of” describes equipment, parts, components, materials or “software” which are suitable for a particular purpose. There is no need for the equipment, parts, components or “software” to have been configured, modified or specified for the particular purpose. For example, any military specification memory circuit would be “capable of” operation in a guidance system.

(d)

“Modified” in the context of “software” describes “software” which has been intentionally changed such that it has properties that make it fit for specified purposes or applications. Its properties may also make it suitable for purposes or applications other than those for which it was “modified”.

1.A.1.

Complete rocket systems (including ballistic missile systems, space launch vehicles, and sounding rockets) capable of delivering at least a 500 kg “payload” to a “range” of at least 300 km.

1.A.2.

Complete unmanned aerial vehicle systems (including cruise missile systems, target drones and reconnaissance drones) capable of delivering at least a 500 kg “payload” to a “range” of at least 300 km.

1.B.1.

“Production facilities” specially designed for the systems specified in 1.A.

None.

1.D.1.

“Software” specially designed or modified for the “use” of “production facilities” specified in 1.B.

1.D.2.

“Software” which coordinates the function of more than one subsystem, specially designed or modified for “use” in systems specified in 1.A.

1.E.1.

“Technology”, in accordance with the General Technology Note, for the “development”, “production” or “use” of equipment or “software” specified in 1.A., 1.B., or 1.D.

2.A.1.

Complete subsystems usable in the systems specified in 1.A., as follows:

a.

Individual rocket stages usable in the systems specified in 1.A.;

b.

Re-entry vehicles, and equipment designed or modified therefor, usable in the systems specified in 1.A., as follows, except as provided in the Note below 2.A.1. for those designed for non-weapon payloads:

1.

Heat shields, and components therefor, fabricated of ceramic or ablative materials;

2.

Heat sinks and components therefor, fabricated of light-weight, high heat capacity materials;

3.

Electronic equipment specially designed for re-entry vehicles;

c.

Rocket propulsion subsystems, usable in the systems specified in 1.A., as follows;

1.

Solid propellant rocket motors or hybrid rocket motors having a total impulse capacity equal to or greater than 1.1 × 106 Ns;

2.

Liquid propellant rocket engines integrated, or designed or modified to be integrated, into a liquid propellant propulsion system which has a total impulse capacity equal to or greater than 1.1 × 106 Ns;

Liquid propellant apogee engines or station-keeping engines specified in 2.A.1.c.2., designed or modified for use on satellites, may be treated as Category II, if the subsystem is exported subject to end-use statements and quantity limits appropriate for the excepted end-use stated above, when having a vacuum thrust not greater than 1 kN.

d.

“Guidance sets”, usable in the systems specified in 1.A., capable of achieving system accuracy of 3.33 % or less of the “range” (e.g. a “CEP” of 10 km or less at a “range” of 300 km), except as provided in the Note below 2.A.1. for those designed for missiles with a “range” under 300 km or manned aircraft;

1.

A “guidance set” integrates the process of measuring and computing a vehicle's position and velocity (i.e. navigation) with that of computing and sending commands to the vehicle's flight control systems to correct the trajectory.

2.

“CEP” (circle of equal probability) is a measure of accuracy, defined as the radius of the circle centred at the target, at a specific range, in which 50 % of the payloads impact.

e.

Thrust vector control sub-systems, usable in the systems specified in 1.A., except as provided in the Note below 2.A.1. for those designed for rocket systems that do not exceed the “range”/“payload” capability of systems specified in 1.A.;

2.A.1.e. includes the following methods of achieving thrust vector control:

a.

Flexible nozzle;

b.

Fluid or secondary gas injection;

c.

Movable engine or nozzle;

d.

Deflection of exhaust gas stream (jet vanes or probes);

e.

Use of thrust tabs.

f.

Weapon or warhead safing, arming, fuzing, and firing mechanisms, usable in the systems specified in 1.A., except as provided in the Note below 2.A.1. for those designed for systems other than those specified in 1.A.

The exceptions in 2.A.1.b., 2.A.1.d., 2.A.1.e. and 2.A.1.f. above may be treated as Category II if the subsystem is exported subject to end-use statements and quantity limits appropriate for the excepted end-use stated above.

2.B.1.

“Production facilities” specially designed for the subsystems specified in 2.A.

2.B.2.

“Production equipment” specially designed for the subsystems specified in 2.A.

None.

2.D.1.

“Software” specially designed or modified for the “use” of “production facilities” specified in 2.B.1.

2.D.2.

“Software” specially designed or modified for the “use” of rocket motors or engines specified in 2.A.1.c.

2.D.3.

“Software”, specially designed or modified for the “use” of “guidance sets” specified in 2.A.1.d.

2.D.3. includes “software”, specially designed or modified to enhance the performance of “guidance sets” to achieve or exceed the accuracy specified in 2.A.1.d.

2.D.4.

“Software” specially designed or modified for the “use” of subsystems or equipment specified in 2.A.1.b.3.

2.D.5.

“Software” specially designed or modified for the “use” of systems in 2.A.1.e.

2.D.6.

“Software” specially designed or modified for the “use” of systems in 2.A.1.f.

Subject to end-use statements appropriate for the excepted end-use, “software” controlled by 2.D.2. - 2.D.6. may be treated as Category II as follows:

1.

Under 2.D.2. if specially designed or modified for liquid propellant apogee engines or station keeping engines, designed or modified for satellite applications as specified in the Note to 2.A.1.c.2.;

2.

Under 2.D.3. if designed for missiles with a “range” of under 300 km or manned aircraft;

3.

Under 2.D.4. if specially designed or modified for re-entry vehicles designed for non-weapon payloads;

4.

Under 2.D.5. if designed for rocket systems that do not exceed the “range” “payload” capability of systems specified in 1.A.;

5.

Under 2.D.6. if designed for systems other than those specified in 1.A.

2.E.1.

“Technology”, in accordance with the General Technology Note, for the “development”, “production” or “use” of equipment or “software” specified in 2.A., 2.B. or 2.D.

3.A.1.

Turbojet and turbofan engines, as follows:

a.

Engines having both of the following characteristics:

1.

“Maximum thrust value” greater than 400 N (achieved un-installed) excluding civil certified engines with a “maximum thrust value” greater than 8,89 kN (achieved un-installed); and

2.

Specific fuel consumption of 0.15 kg N– 1 h– 1 or less (at maximum continuous power at sea level static conditions using the ICAO standard atmosphere);

In 3.A.1.a.1., “maximum thrust value” is the manufacturer's demonstrated maximum thrust for the engine type un-installed. The civil type certified thrust value will be equal to or less than the manufacturer's demonstrated maximum thrust for the engine type.

b.

Engines designed or modified for systems specified in 1.A. or 19.A.2., regardless of thrust or specific fuel consumption.

Engines specified in 3.A.1. may be exported as part of a manned aircraft or in quantities appropriate for replacement parts for a manned aircraft.

3.A.2.

Ramjet/scramjet/pulse jet/“combined cycle engines”, including devices to regulate combustion, and specially designed components therefor, usable in the systems specified in 1.A. or 19.A.2.

In Item 3.A.2., “combined cycle engines” are the engines that employ two or more cycles of the following types of engines: gas-turbine engine (turbojet, turboprop, turbofan and turboshaft), ramjet, scramjet, pulse jet, pulse detonation engine, rocket motor (liquid/solid-propellant and hybrid).

3.A.3.

Rocket motor cases, “insulation” components and nozzles therefor, usable in the systems specified in 1.A. or 19.A.1.

In 3.A.3. “insulation” intended to be applied to the components of a rocket motor, i.e. the case, nozzle inlets, case closures, includes cured or semi-cured compounded rubber components comprising sheet stock containing an insulating or refractory material. It may also be incorporated as stress relief boots or flaps.

Refer to 3.C.2. for “insulation” material in bulk or sheet form.

3.A.4.

Staging mechanisms, separation mechanisms, and interstages therefor, usable in the systems specified in 1.A.

See also Item 11.A.5.

3.A.5.

Liquid, slurry and gel propellant (including oxidisers) control systems, and specially designed components therefor, usable in the systems specified in 1.A., designed or modified to operate in vibration environments greater than 10 g rms between 20 Hz and 2 kHz.

1.

The only servo valves, pumps and gas turbines specified in 3.A.5. are the following:

a.

Servo valves designed for flow rates equal to or greater than 24 litres per minute, at an absolute pressure equal to or greater than 7 MPa, that have an actuator response time of less than 100 ms.

b.

Pumps, for liquid propellants, with shaft speeds equal to or greater than 8000 rpm at the maximum operating mode or with discharge pressures equal to or greater than 7 MPa.

c.

Gas turbines, for liquid propellant turbopumps, with shaft speeds equal to or greater than 8000 rpm at the maximum operating mode.

2.

Systems and components specified in 3.A.5. may be exported as part of a satellite.

3.A.6.

Specially designed components for hybrid rocket motors specified in 2.A.1.c.1. and 20.A.1.b.1.

3.A.7.

Radial ball bearings having all tolerances specified in accordance with ISO 492 Tolerance Class 2 (or ANSI/ABMA Std 20 Tolerance Class ABEC-9 or other national equivalents), or better and having all the following characteristics:

a.

An inner ring bore diameter between 12 and 50 mm;

b.

An outer ring outside diameter between 25 and 100 mm; and

c.

A width between 10 and 20 mm.

3.A.8.

Liquid propellant tanks specially designed for the propellants controlled in Item 4.C. or other liquid propellants used in the systems specified in 1.A.1.

3.A.9.

“Turboprop engine systems” specially designed for the systems in 1.A.2. or 19.A.2., and specially designed components therefor, having a maximum power greater than 10 kW (achieved uninstalled at sea level static conditions using the ICAO standard atmosphere), excluding civil certified engines.

For the purposes of Item 3.A.9., a “turboprop engine system” incorporates all of the following:

a.

Turboshaft engine; and

b.

Power transmission system to transfer the power to a propeller.

3.A.10.

Combustion chambers and nozzles for liquid propellant rocket engines usable in the subsystems specified in 2.A.1.c.2. or 20.A.1.b.2.

3.B.1.

This article is long: the rest is at the official publication.