Art. 1 Regulation (EU) 2015/1136

In forcesince 13 Jul 2015

Implementing Regulation (EU) No 402/2013 is amended as follows:

(1)

Article 3 is amended as follows:

(a)

point (9) is replaced by the following:

‘(9) “safety requirements” means the safety characteristics (qualitative or quantitative, or when needed both qualitative and quantitative) necessary for the design, operation (including operational rules) and maintenance of a system in order to meet legal or company safety targets;’

(b)

point (23) is replaced by the following:

‘(23) “catastrophic accident” means an accident typically affecting a large number of people and resulting in multiple fatalities;’

(c)

the following points (32) to (37) are added:

‘(32) “systematic failure” means a failure that occurs repeatedly under some particular combination of inputs or under some particular environmental or application conditions;

(33)

“systematic fault” means an inherent fault in the specification, design, manufacturing, installation, operation or maintenance of the system under assessment;

(34)

“barrier” means a technical, operational or organisational risk control measure outside the system under assessment that either reduces the frequency of occurrence of a hazard or mitigates the severity of the potential consequence of that hazard;

(35)

“critical accident” means an accident typically affecting a very small number of people and resulting in at least one fatality;

(36)

“highly improbable” means an occurrence of failure at a frequency less than or equal to 10– 9 per operating hour;

(37)

“improbable” means an occurrence of failure at a frequency less than or equal to 10– 7 per operating hour.’

(2)

Annex I is amended in accordance with the Annex to this Regulation.