2 ‘ANNEX II, Regulation (EU) 2015/830

In force

0.1.1.

This Annex sets out the requirements that the supplier shall fulfil for the compilation of a safety data sheet that is provided for a substance or a mixture in accordance with Article 31.

0.1.2.

The information provided in the safety data sheet shall be consistent with the information in the chemical safety report, where one is required. Where a chemical safety report has been completed, the relevant exposure scenario(s) shall be placed in an annex to the safety data sheet.

0.2.1.

The safety data sheet shall enable users to take the necessary measures relating to protection of human health and safety at the workplace, and protection of the environment. The writer of the safety data sheet shall take into account that a safety data sheet must inform its audience of the hazards of a substance or a mixture and provide information on the safe storage, handling and disposal of the substance or the mixture.

0.2.2.

The information provided by safety data sheets shall also meet the requirements set out in Directive 98/24/EC. In particular, the safety data sheet shall enable employers to determine whether any hazardous chemical agents are present in the workplace and to assess any risk to the health and safety of workers arising from their use.

0.2.3.

The information in the safety data sheet shall be written in a clear and concise manner. The safety data sheet shall be prepared by a competent person who shall take into account the specific needs and knowledge of the user audience, as far as they are known. Suppliers of substances and mixtures shall ensure that such competent persons have received appropriate training, including refresher training.

0.2.4.

The language used in the safety data sheet shall be simple, clear and precise, avoiding jargon, acronyms and abbreviations. Statements such as “may be dangerous”, “no health effects”, “safe under most conditions of use” or “harmless” or any other statements indicating that the substance or mixture is not hazardous or any other statements that are inconsistent with the classification of that substance or mixture shall not be used.

0.2.5.

The date of compilation of the safety data sheet shall be given on the first page. When a safety data sheet has been revised and the new, revised version is provided to recipients, the changes shall be brought to the attention of the recipients in Section 16 of the safety data sheet, unless the changes have been indicated elsewhere. For the revised safety data sheets, the date of compilation, identified as “Revision: (date)”, as well as a version number, revision number, supersedes date or some other indication of what version is replaced shall appear on the first page.

0.3.1.

A safety data sheet is not a fixed length document. The length of the safety data sheet shall be commensurate with the hazard of the substance or mixture and the information available.

0.3.2.

All pages of a safety data sheet, including any annexes, shall be numbered and shall bear either an indication of the length of the safety data sheet (such as “page 1 of 3”) or an indication whether there is a page following (such as “Continued on next page” or “End of safety data sheet”).

The information required by this Annex shall be included in the safety data sheet, where applicable and available, in the relevant subsections set out in Part B. The safety data sheet shall not contain blank subsections.

The inclusion of additional relevant and available information in the relevant subsections may be necessary in some cases in view of the wide range of properties of substances and mixtures.

Additional safety and environmental information is required to address the needs of seafarers and other transport workers in the bulk transport of dangerous goods in seagoing or inland navigation bulk carriers or tank-vessels subject to International Maritime Organisation (IMO) or national regulations. Subsection 14.7 recommends the inclusion of basic classification information when such cargoes are transported in bulk according to Annex II of the International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978 relating thereto (Marpol) [Marpol — Consolidated edition 2006, London, IMO 2007, ISBN 978-92-801-4216-7.] and the International Code for the Construction and Equipment of Ships carrying Dangerous Chemicals in Bulk (International Bulk Chemical Code) (the IBC Code) [IBC Code, 2007 edition, London, IMO 2007, ISBN 978-92-801-4226-6.]. In addition, ships carrying oil or oil fuel, as defined in Annex I of Marpol, in bulk or bunkering oil fuel are required, before loading, to be provided with a “material safety data sheet” in accordance with the IMO's Maritime Safety Committee (MSC) resolution “Recommendations for Material Safety Data Sheets (MSDS) for Marpol Annex I Oil Cargo and Oil Fuel” (MSC.286(86)). Therefore, in order to have one harmonised safety data sheet for maritime and non-maritime use, the additional provisions of Resolution MSC.286(86) may be included in the safety data sheets, where appropriate, for marine transport of Marpol Annex I cargoes and marine fuel oils.

The units of measurement as set out in Council Directive 80/181/EEC [Council Directive 80/181/EEC of 20 December 1979 on the approximation of the laws of the Member States relating to units of measurement and on the repeal of Directive 71/354/EEC (OJ L 39, 15.2.1980, p. 40).] shall be used.

Safety data sheets shall also be required for the special cases listed in paragraph 1.3 of Annex I to Regulation (EC) No 1272/2008 for which there are labelling derogations.

This section of the safety data sheet shall prescribe how the substance or mixture shall be identified and how the identified relevant uses, the name of the supplier of the substance or mixture and the contact detail information of the supplier of the substance or mixture, including an emergency contact, shall be provided in the safety data sheet.

The product identifier shall be provided in accordance with Article 18(2) of Regulation (EC) No 1272/2008 in the case of a substance and in accordance with Article 18(3)(a) of Regulation (EC) No 1272/2008 in the case of a mixture, and as provided on the label in the official language(s) of the Member State(s) where the substance or mixture is placed on the market, unless the Member State(s) concerned provide(s) otherwise.

For substances subject to registration, the product identifier shall be consistent with that provided in the registration and the registration number assigned under Article 20(3) of this Regulation shall also be indicated.

Without affecting the obligations of downstream users laid down in Article 39 of this Regulation, the part of the registration number referring to the individual registrant of a joint submission may be omitted by a supplier who is a distributor or a downstream user provided that:

(a)

this supplier assumes the responsibility to provide the full registration number upon request for enforcement purposes or, if the full registration number is not available to him, to forward the request to his supplier, in line with point (b); and

(b)

this supplier provides the full registration number to the Member State authority responsible for enforcement (the enforcement authority) within 7 days upon request, received either directly from the enforcement authority or forwarded by his recipient, or, if the full registration number is not available to him, this supplier shall forward the request to his supplier within 7 days upon request and at the same time inform the enforcement authority thereof.

A single safety data sheet may be provided to cover more than one substance or mixture where the information in that safety data sheet fulfils the requirements of this Annex for each of those substances or mixtures.

Other names or synonyms by which the substance or mixture is labelled or commonly known, such as alternative names, numbers, company product codes, or other unique identifiers may be provided.

At least the identified uses relevant for the recipient(s) of the substance or mixture shall be indicated. This shall be a brief description of what the substance or mixture is intended to do, such as “flame retardant”, “antioxidant”.

The uses which the supplier advises against and the reasons why shall, where applicable, be stated. This need not be an exhaustive list.

Where a chemical safety report is required, the information in this subsection of the safety data sheet shall be consistent with the identified uses in the chemical safety report and the exposure scenarios from the chemical safety report set out in the annex to the safety data sheet.

The supplier, whether it is the manufacturer, importer, only representative, downstream user or distributor, shall be identified. The full address and telephone number of the supplier shall be given as well as an e-mail address for a competent person responsible for the safety data sheet.

In addition, if the supplier is not located in the Member State where the substance or mixture is placed on the market and he has nominated a responsible person for that Member State, a full address and telephone number for that responsible person shall be given.

For registrants, the information shall be consistent with the information on the identity of the manufacturer or importer provided in the registration.

Where an only representative has been appointed, details of the non-Union manufacturer or formulator may also be provided.

References to emergency information services shall be provided. If an official advisory body exists in the Member State where the substance or mixture is placed on the market (this may be the body responsible for receiving information relating to health referred to in Article 45 of Regulation (EC) No 1272/2008), its telephone number shall be given and can suffice. If availability of such services is limited for any reasons, such as hours of operation, or if there are limits on specific types of information provided, this shall be clearly stated.

This section of the safety data sheet shall describe the hazards of the substance or mixture and the appropriate warning information associated with those hazards.

The classification of the substance or the mixture which results from the application of the classification criteria in Regulation (EC) No 1272/2008 shall be given. Where the supplier has notified information regarding the substance to the classification and labelling inventory in accordance with Article 40 of Regulation (EC) No 1272/2008, the classification given in the safety data sheet shall be the same as the classification provided in that notification.

If the mixture does not meet the criteria for classification in accordance with Regulation (EC) No 1272/2008, this shall be clearly stated.

Information on the substances in the mixture is provided under subsection 3.2.

If the classification, including the hazard statements, is not written out in full, reference shall be made to Section 16 where the full text of each classification, including each hazard statement, shall be given.

The most important adverse physical, human health and environmental effects shall be listed in accordance with Sections 9 to 12 of the safety data sheet, in such a way as to allow non-experts to identify the hazards of the substance or mixture.

Based on the classification, at least the following elements appearing on the label in accordance with Regulation (EC) No 1272/2008 shall be provided: hazard pictogram(s), signal word(s), hazard statement(s) and precautionary statement(s). A graphical reproduction of the full hazard pictogram in black and white or a graphical reproduction of the symbol only may be substituted for the colour pictogram provided in Regulation (EC) No 1272/2008.

The applicable label elements in accordance with Article 25 and Article 32(6) of Regulation (EC) No 1272/2008 shall be provided.

Information on whether the substance or mixture meets the criteria for PBT or vPvB in accordance with Annex XIII shall be provided.

Information shall be provided on other hazards which do not result in classification but which may contribute to the overall hazards of the substance or mixture, such as formation of air contaminants during hardening or processing, dustiness, explosive properties which do not fulfil the classification criteria of part 2 Section 2.1 of Annex I to Regulation (EC) No 1272/2008, dust explosion hazards, cross-sensitisation, suffocation, freezing, high potency for odour or taste, or environmental effects like hazards to soil-dwelling organisms, or photochemical ozone creation potential. The statement “May form explosible dust-air mixture if dispersed” is appropriate in the case of a dust explosion hazard.

This section of the safety data sheet shall describe the chemical identity of the ingredient(s) of the substance or mixture, including impurities and stabilising additives as set out below. Appropriate and available safety information on surface chemistry shall be indicated.

The chemical identity of the main constituent of the substance shall be provided by providing at least the product identifier or one of the other means of identification given in subsection 1.1.

The chemical identity of any impurity, stabilising additive, or individual constituent other than the main constituent, which is itself classified and which contributes to the classification of the substance shall be provided as follows:

(a)

the product identifier in accordance with Article 18(2) of Regulation (EC) No 1272/2008;

(b)

if the product identifier is not available, one of the other names (usual name, trade name, abbreviation) or identification numbers.

Suppliers of substances may choose to list in addition all constituents including non-classified ones.

This subsection may also be used to provide information on multi-constituent substances.

The product identifier, the concentration or concentration ranges and the classifications shall be provided for at least all substances referred to in points 3.2.1 or 3.2.2. Suppliers of mixtures may choose to list in addition all substances in the mixture, including substances not meeting the criteria for classification. This information shall enable the recipient to identify readily the hazards of the substances in the mixture. The hazards of the mixture itself shall be given in Section 2.

The concentrations of the substances in a mixture shall be described as either of the following:

(a)

exact percentages in descending order by mass or volume, if technically possible;

(b)

ranges of percentages in descending order by mass or volume, if technically possible.

When using a range of percentages, the health and environmental hazards shall describe the effects of the highest concentration of each ingredient.

If the effects of the mixture as a whole are available, this information shall be included under Section 2.

Where the use of an alternative chemical name is permitted in accordance with Article 24 of Regulation (EC) No 1272/2008, that name can be used.

3.2.1.

For a mixture meeting the criteria for classification in accordance with Regulation (EC) No 1272/2008, the following substances shall be indicated, together with their concentration or concentration range in the mixture:

(a)

substances presenting a health or environmental hazard within the meaning of Regulation (EC) No 1272/2008, if those substances are present in concentrations equal to or greater than the lowest of any of the following:

(ia)

the generic cut-off values set out in Table 1.1 of Annex I to Regulation (EC) No 1272/2008;

(ib)

the generic concentration limits given in parts 3 to 5 of Annex I to Regulation (EC) No 1272/2008, taking into account the concentrations specified in the notes to certain tables in part 3 in relation to the obligation to make available a safety data sheet for the mixture upon request, and for aspiration hazard (Section 3.10 of Annex I to Regulation (EC) No 1272/2008) ≥ 10 %;

1.1. Hazard class and category

Concentration limit

(%)

Acute toxicity, category 1, 2 and 3 | ≥ 0,1

Acute toxicity, category 4 | ≥ 1

Skin corrosion/irritation, category 1, sub-categories 1A, 1B, 1C and category 2 | ≥ 1

Serious damage to eyes/eye irritation, category 1 and 2 | ≥ 1

Respiratory/skin sensitisation | ≥ 0,1

Germ cell mutagenicity category 1A and 1B | ≥ 0,1

Germ cell mutagenicity category 2 | ≥ 1

Carcinogenicity category 1A, 1B and 2 | ≥ 0,1

Reproductive toxicity, category 1A, 1B, 2 and effects on or via lactation | ≥ 0,1

Specific target organ toxicity (STOT) — single exposure, category 1 and 2 | ≥ 1

Specific target organ toxicity (STOT) — repeated exposure, category 1 and 2 | ≥ 1

Aspiration hazard | ≥ 10

Hazardous to the aquatic environment — Acute, category 1 | ≥ 0,1

Hazardous to the aquatic environment — Chronic, category 1 | ≥ 0,1

Hazardous to the aquatic environment — Chronic, category 2, 3 and 4 | ≥ 1

Hazardous for the ozone layer | ≥ 0,1

(ii)

the specific concentration limits given in Part 3 of Annex VI to Regulation (EC) No 1272/2008;

(iii)

if an M-factor has been given in Part 3 of Annex VI to Regulation (EC) No 1272/2008, the generic cut-off value in Table 1.1 of Annex I to that Regulation, adjusted using the calculation set out in Section 4.1 of Annex I to that Regulation;

(iv)

the specific concentration limits provided to the classification and labelling inventory established under Regulation (EC) No 1272/2008;

(v)

the concentration limits set out in Annex II to Regulation (EC) No 1272/2008;

(vi)

if an M-factor has been provided to the classification and labelling inventory established under Regulation (EC) No 1272/2008, the generic cut-off value in Table 1.1 of Annex I to that Regulation, adjusted using the calculation set out in Section 4.1 of Annex I to that Regulation.

(b)

substances for which there are Union workplace exposure limits which are not already included under point (a);

(c)

substances that are persistent, bioaccumulative and toxic or very persistent and very bioaccumulative in accordance with the criteria set out in Annex XIII, or substances included in the list established in accordance with Article 59(1) for reasons other than the hazards referred to in point (a), if the concentration of an individual substance is equal to or greater than 0,1 %.

3.2.2.

For a mixture not meeting the criteria for classification in accordance with Regulation (EC) No 1272/2008, substances present in an individual concentration equal to or greater than the following concentrations shall be indicated, together with their concentration or concentration range:

(a)

1 % by weight in non-gaseous mixtures and 0,2 % by volume in gaseous mixtures for:

(i)

substances which present a health or environmental hazard within the meaning of Regulation (EC) No 1272/2008; or

(ii)

substances for which Union workplace exposure limits have been assigned;

(b)

0,1 % by weight for substances which are persistent, bioaccumulative and toxic in accordance with the criteria set out in Annex XIII, very persistent and very bioaccumulative in accordance with the criteria set out in Annex XIII, or included in the list established in accordance with Article 59(1) for reasons other than the hazards referred to in point (a).

3.2.3.

For the substances indicated in subsection 3.2, the classification of the substance according to Regulation (EC) No 1272/2008, including the hazard class(es) and category code(s) as provided in Table 1.1 of Annex VI to that Regulation as well as the hazard statements which are assigned in accordance with their physical, human health and environmental hazards, shall be provided. The hazard statements do not need to be written out in full in this section; their codes shall be sufficient. In cases where they are not written out in full, reference shall be made to Section 16, where the full text of each relevant hazard statement shall be listed. If the substance does not meet the classification criteria, the reason for indicating the substance in subsection 3.2 shall be described, such as “non-classified vPvB substance” or “substance with a Union workplace exposure limit”.

3.2.4.

For the substances indicated in subsection 3.2 the name and, if available, the registration number, as assigned under Article 20(3) of this Regulation, shall be given.

Without affecting the obligations of downstream users laid down in Article 39 of this Regulation, the part of the registration number referring to the individual registrant of a joint submission may be omitted by the supplier of the mixture provided that:

(a)

this supplier assumes the responsibility to provide the full registration number upon request for enforcement purposes or, if the full registration number is not available to him, to forward the request to his supplier, in line with point (b); and

(b)

this supplier provides the full registration number to the Member State authority responsible for enforcement (hereinafter referred to as the enforcement authority) within seven days upon request, received either directly from the enforcement authority or forwarded by his recipient, or, if the full registration number is not available to him, this supplier shall forward the request to his supplier within seven days upon request and at the same time inform the enforcement authority thereof.

The EC number, if available, shall be given in accordance with Regulation (EC) No 1272/2008. The CAS number, if available, and the IUPAC name, if available, may also be given.

For substances indicated in this subsection by means of an alternative chemical name in accordance with Article 24 of Regulation (EC) No 1272/2008, the registration number, EC number and other precise chemical identifiers are not necessary.

This section of the safety data sheet shall describe the initial care in such a way that an untrained responder can understand and provide it without the use of sophisticated equipment and without the availability of a wide selection of medications. If medical attention is required, the instructions shall state this, including its urgency.

4.1.1.

First aid instructions shall be provided by relevant routes of exposure. Subdivisions shall be used to indicate the procedure for each route, such as inhalation, skin, eye and ingestion.

4.1.2.

Advice shall be provided as to whether:

(a)

immediate medical attention is required and if delayed effects can be expected after exposure;

(b)

movement of the exposed individual from the area to fresh air is recommended;

(c)

removal and handling of clothing and shoes from the individual is recommended; and

(d)

personal protective equipment for first aid responders is recommended.

Briefly summarised information shall be provided on the most important symptoms and effects, both acute and delayed, from exposure.

This article is long: the rest is at the official publication.