Art. 8 Commission Regulation (EU) No 1303/2014 of 18 November 2014 concerning the technical spe…

In forcesince 16 Jun 2019cited 1×
1.

In order to keep pace with technological progress, innovative solutions may be required which do not comply with the specifications set out in the Annex and/or for which the assessment methods set out in the Annex cannot be applied. In that case, new specifications and/or new assessment methods associated with those innovative solutions may be developed according to the provisions of paragraphs 2 to 5.

2.

Innovative solutions may be related to the subsystems referred to in Article 2, their parts and their interoperability constituents.

3.

If an innovative solution is proposed, the manufacturer or his authorised representative established within the Union shall declare how it deviates from or complements to the provisions of the relevant TSIs and shall submit the deviations to the Commission for analysis. The Commission may request the opinion of the Agency on the proposed innovative solution.

4.

The Commission shall deliver an opinion on the innovative solution proposed. If this opinion is positive, the appropriate functional and interface specifications and the assessment method, which need to be included in the relevant TSIs in order to allow the use of this innovative solution, shall be developed and subsequently integrated into the relevant TSIs during the revision process pursuant to Article 5 of Directive (EU) 2016/797. If the opinion is negative, the innovative solution proposed cannot be applied.

5.

Pending the review of the relevant TSIs, a positive opinion delivered by the Commission shall be considered as an acceptable means of compliance with the essential requirements of Directive (EU) 2016/797 and may be used for the assessment of the subsystem.