A Technical Specification for Interoperability (TSI) is a specification that covers a subsystem, or part thereof, as defined in Article 2(11) of Directive (EU) 2016/797 of the European Parliament and of the Council [Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Union (OJ L 138, 26.5.2016, p. 44).].
This technical specification for interoperability (TSI) is a specification by which a particular subsystem is addressed in order to meet the essential requirements and ensure the interoperability of the Union's rail system as described in Article 1 of Directive (EU) 2016/797.
The particular subsystem is the rolling stock of the Union's rail system referred to in section 2.7 of Annex II to Directive (EU) 2016/797.
This TSI is applicable to rolling stock:
which is (or is intended to be) operated on the rail network defined in the Section 1.2 ‘Geographical scope’ of this TSI,
and
which is of one of the following types (as defined in section 2 of Annex I to Directive (EU) 2016/797):
Self-propelling thermal or electric trains,
Thermal or electric traction units,
Passenger carriages,
Mobile railway infrastructure construction and maintenance equipment.
Rolling stock of the types mentioned in Articles 1(3) and (4) of Directive (EU) 2016/797 are excluded from the scope of this TSI:
Metros, tram, and other light rail vehicles,
Vehicles for the operation of local, urban or suburban passenger services on networks that are functionally separate from the rest of the railway system,
Vehicles exclusively used on privately owned railway infrastructure that exists solely for use by the owner for its own freight operations,
Vehicles reserved for a strictly local, historical or touristic use.
The detailed definition of the rolling stock in the scope of this TSI is given in Chapter 2.
This TSI applies to the Union rail system.
In accordance with Article 4(3) of Directive (EU) 2016/797, this TSI covers the ‘rolling stock - Locomotives and passenger rolling stock’ subsystem.
The Union's rail system has been broken down into subsystems as set out in Annex II to Directive (EU) 2016/797.
The Locomotives and passenger rolling stock subsystem has interfaces with other subsystems of the Union rail system. Those interfaces are considered within the frame of an integrated system, compliant with all the relevant TSIs.
In addition to the rolling stock subsystem, other TSIs describe specific aspects of the railway system and concern several subsystems.
The requirements concerning the rolling stock subsystem expressed in the Commission Regulation (EU) No 1300/2014 [Commission Regulation (EU) No 1300/2014 of 18 November 2014 on the technical specifications for interoperability relating to accessibility of the Union's rail system for persons with disabilities and persons with reduced mobility Text with EEA relevance (OJ L 356, 12.12.2014, p. 110).] (‘TSI PRM’) and the Commission Regulation (EU) No 1304/2014 [Commission Regulation (EU) No 1304/2014 of 26 November 2014 on the technical specification for interoperability relating to the subsystem ‘rolling stock — noise’ amending Decision 2008/232/EC and repealing Decision 2011/229/EU Text with EEA relevance (OJ L 356, 12.12.2014, p. 421).] (‘TSI NOI’) are not repeated in this TSI. They apply to ‘Locomotives and passenger rolling stock’ subsystem in accordance with their respective scope and implementation rules.
For the purpose of this TSI, the following definitions apply:
A ‘unit’ is the generic term used to name the rolling stock which is subject to the application of this TSI, and therefore subject to ‘EC’ verification.
A Unit may be composed of several ‘vehicles’, as defined in point (3) of Article 2 of Directive (EU) 2016/797, Article 2(c); considering the scope of this TSI, the use of the term ‘vehicle’ in this TSI is limited to the rolling stock subsystem as defined in Chapter 1.
A ‘train’ is an operational formation consisting of one or more units.
A ‘passenger train’ is an operational formation accessible to passengers (a train composed of passenger vehicles but not accessible to passengers is not considered as a passenger train).
A ‘fixed formation’ is a train formation that can only be reconfigured within a workshop environment.
A ‘predefined formation(s)’ is a train formation(s) of several units coupled together, which is defined at design stage and can be reconfigured during operation.
‘Multiple operation’ is an operational formation consisting of more than one unit, including:
trainsets designed in such a way that several of them (of the type under assessment) are capable of being coupled together to operate as a single train controlled from 1 driver's cab;
locomotives designed in such a way that several of them (of the type under assessment) are capable of being included in a single train controlled from one driver's cab.
‘General operation’: A unit is designed for general operation when the unit is intended to be coupled with other unit(s) in a train formation which is not defined at design stage.
Definitions below are classified in three groups as defined in the section 2 of Annex I to Directive (EU) 2016/797:
(A) Locomotives and passenger rolling stock, including thermal or electric traction units, self-propelling thermal or electric passenger trains, and passenger coaches:
A Locomotive is a traction vehicle (or combination of several vehicles) that is not intended to carry a payload and has the ability to be uncoupled in normal operation from a train and to operate independently.
A Shunter is a traction unit designed for use only on shunting yards, stations and depots.
Traction in a train can also be provided by a powered vehicle with or without driving cab, which is not intended to be uncoupled during normal operation. Such a vehicle is called a Power Unit (or power car) in general or a Power Head when located at one end of the trainset and fitted with a driving cab.
A Trainset is a fixed formation that can operate as a train; it is by definition not intended to be reconfigured, except within a workshop environment. It is composed of only motored or of motored and non-motored vehicles.
An Electric and/or Diesel Multiple Unit is a trainset in which all vehicles are capable of carrying a payload (passengers or luggage/mail or freight).
A Railcar is a vehicle that can operate autonomously and is capable of carrying a payload (passengers or luggage/mail or freight).
A tram – train is a vehicle designed for combined use on both a light-rail infrastructure and a heavy-rail infrastructure;
A Coach is a vehicle without traction in a fixed or variable formation capable of carrying passengers (by extension, requirements specified to apply to coaches in this TSI are deemed to apply also to restaurant cars, sleeping cars, couchettes cars, etc.).
A Van is a vehicle without traction capable of carrying payload other than passengers, e.g. luggage or mail, intended to be integrated into a fixed or variable formation which is intended to transport passengers.
A Driving Trailer is a vehicle without traction equipped with a driving cab.
A coach may be equipped with a driver's cab; such a coach is then named a Driving Coach.
A van may be fitted with a driver's cab and as such is known as a Driving Van.
A Car carrier is a vehicle without traction capable of carrying passenger motor cars without their passengers and which is intended to be integrated in a passenger train.
A Fixed Rake of Coaches is a formation of several coaches ‘semi-permanently’ coupled together, or which can be reconfigured only when it is out of service.
A Personnel Carriage is a unit capable of carrying persons but not intended to be used for passenger service.
(B) Freight wagons, including low-deck vehicles designed for the entire network and vehicles designed to carry lorries.
Such vehicles are out of the scope of this TSI. They are covered by Commission Regulation (EU) No 321/2013 [Commission Regulation (EU) No 321/2013 of 13 March 2013 concerning the technical specification for interoperability relating to the subsystem ‘rolling stock — freight wagons’ of the rail system in the European Union and repealing Decision 2006/861/EC (OJ L 104, 12.4.2013, p. 1).] (‘TSI WAG’).
(C) Special vehicles
Special vehicles, such as On-Track Machines (OTMs), are categorised in the EVR Commission Implementing Decision (EU) 2018/1614 [Commission Implementing Decision (EU) 2018/1614 of 25 October 2018 laying down specifications for the vehicle registers referred to in Article 47 of Directive (EU) 2016/797 of the European Parliament and of the Council and amending and repealing Commission Decision 2007/756/EC, C/2018/6929 (OJ L 268, 26.10.2018, p. 53).]. They can be grouped into the following subsets:
On track Machines (OTMs) are vehicles specially designed for construction and maintenance of the track and infrastructure.
Infrastructure Inspection Vehicles (IIVs) are vehicles utilised to monitor the condition of the infrastructure.
Environment vehicles are vehicles designed for clearance of the track from environmental conditions such as snow clearance machines.
Emergency vehicles are vehicles designed for a specific emergency use such as evacuation, firefighting, and recovery of trains (including the breakdown cranes).
Road-Rail vehicles are self-propelled machines able to move on rails and on the ground.
Special vehicles can be used in one or more of the following modes: working mode, travelling mode and running mode, as self-propelled or as hauled vehicles.
The scope of this TSI concerning rolling stock, classified in three groups as defined in the Annex I section 2 of Directive (EU) 2016/797, is detailed as follows:
(A) Locomotives and passenger rolling stock, including thermal or electric traction units, self-propelling thermal or electric passenger trains, and passenger coaches
This type includes traction vehicles that are not capable of carrying a payload, such as thermal or electric locomotives or power units.
The concerned traction vehicles are intended for freight or/and passenger transport.
Exclusion from the scope:
Shunters (as defined in Section 2.2) are not in the scope of this TSI. When they are intended to operate on the Union railway network (movement between shunting yards, stations and depots), article 1.4(b) of Directive (EU) 2016/797 applies.
This type includes any train in fixed or pre-defined formation, composed of vehicles passenger carrying and/or vehicles not carrying passengers.
Thermal or electric traction equipment is installed in some vehicles of the train, and the train is fitted with a driver's cab.
Exclusion from the scope:
In accordance with Articles 1.3, 1.4(d) and 1.5 of Directive (EU) 2016/797, the following rolling stock is excluded from the scope of the TSI:
Rolling stock intended to operate on local, urban or suburban networks functionally separate from the rest of the railway system.
Rolling stock primarily used on light rail infrastructure but equipped with some heavy rail components necessary to enable transit to be effected on a confined and limited section of heavy rail infrastructure for connectivity purposes only.
Tram – trains.
Passenger carriages:
This type includes vehicles without traction carrying passengers (coaches, as defined in Section 2.2), and operated in a variable formation with vehicles from the category ‘thermal or electric traction units’ defined above to provide the traction function.
Non-passenger carrying vehicles included in a passenger train:
This type includes vehicles without traction included in passenger trains (e.g. luggage or postal vans, car carriers, vehicles for service...); they are in the scope of this TSI, as vehicles related to transport of passengers.
Personnel (non-passenger) carrying vehicles included in a train not operating passenger services:
This type includes vehicles without traction not accessible to the public, used primarily for the transport of personnel (e.g. military escort personnel, firefighters, personnel of the infrastructure manager or railway undertaking) and intended to be integrated in trains that typically are not accessible to the public and not intended for passenger carriage; they are in the scope of this TSI as personnel carriages, and may be authorised for placing on the market not limited to a particular area of use subject to the conditions in point 7.1.1.6.
(B) Freight wagons, including low-deck vehicles designed for the entire network and vehicles designed to carry lorries are not in the scope of this TSI but covered by the TSI WAG even when they are included in a passenger train (the train composition is in this case an operational issue).
Vehicles intended to carry road motor vehicles even where persons are on on-board the carried road motor vehicles are not in the scope of this TSI.
(C) Special vehicle
Special Vehicles are in the scope of this TSI and shall demonstrate compliance with the requirement of this TSI when in running mode and when:
running on its own rail wheels (in running mode self-propelled or hauled), and
designed and intended to be detected by a track-based train detection system for traffic management.
Specific requirements laid down in chapter 4 and Appendix C for OTMs are also applicable to Infrastructure Inspection Vehicles unless they are designed to be integrated into a fixed passenger train formation; in this case they shall be considered as non-passenger carrying vehicles as defined in point (A) (3).
Excluded from the scope of this TSI are road-rail vehicles.
This TSI is applicable to rolling stock which is intended to be operated on networks of track gauge 1435 mm, or on one of the following nominal track gauges: 1520 mm, 1524 mm system, 1600 mm system and 1668 mm system.
Considering the integrated railway system composed of several subsystems (in particular fixed installations; see Section 2.1), the maximum design speed of rolling stock is deemed to be lower or equal to 350 km/h.
In case of maximum design speed higher than 350 km/h, this technical specification applies, but has to be complemented for the speed range above 350 km/h (or maximum speed related to a particular parameter, where specified in the relevant point of Section 4.2 up to the maximum design speed, by application of the procedure for innovative solutions described in Article 10.
The following table indicates the essential requirements, as set out and numbered in Annex III of Directive (EU) 2016/797, taken into account by the specifications set out in Chapter 4.
Rolling stock elements corresponding to essential requirements
Note: only those points in point 4.2, which contain requirements, are listed.
Ref. point | Element of the rolling stock sub-system | Safety | Reliability-Availability | Health | Environmental protection | Technical compatibility | Accessibility
4.2.2.2.2 | Inner coupling |
1.1.3
2.4.1
4.2.2.2.3 | End coupling |
1.1.3
2.4.1
4.2.2.2.4 | Rescue coupling | | 2.4.2 | | | 2.5.3 |
4.2.2.2.5 | Staff access for coupling and uncoupling | 1.1.5 | | 2.5.1 | | 2.5.3 |
4.2.2.3 | Gangways | 1.1.5 | | | | |
4.2.2.4 | Strength of vehicle structure |
1.1.3
2.4.1
4.2.2.5 | Passive safety | 2.4.1 | | | | |
4.2.2.6 | Lifting and jacking | | | | | 2.5.3 |
4.2.2.7 | Fixing of devices to carbody structure | 1.1.3 | | | | |
4.2.2.8 | Staff and freight access doors |
1.1.5
2.4.1
4.2.2.9 | Mechanical characteristics of glass | 2.4.1 | | | | |
4.2.2.10 | Load conditions and weighted mass | 1.1.3 | | | | |
4.2.3.1 | Gauging | | | | | 2.4.3 |
4.2.3.2.1 | Axle load parameter | | | | | 2.4.3 |
4.2.3.2.2 | Wheel load | 1.1.3 | | | | |
4.2.3.3.1 | Rolling stock characteristics for compatibility with train detection systems | 1.1.1 | | | |
2.4.3
2.3.2
4.2.3.3.2 | Axle bearing condition monitoring | 1.1.1 | 1.2 | | | |
4.2.3.4.1 | Safety against derailment running on twisted track |
1.1.1
1.1.2
2.4.3 |
4.2.3.4.2 | Running dynamic behaviour |
1.1.1
1.1.2
2.4.3
2.3.2
4.2.3.4.2.1 | Limit values for running safety |
1.1.1
1.1.2
2.4.3 |
4.2.3.4.2.2 | Track loading limit values | | | | | 2.4.3 |
4.2.3.4.3 | Equivalent conicity |
1.1.1
1.1.2
2.4.3 |
4.2.3.4.3.1 | Design values for new wheel profiles |
1.1.1
1.1.2
2.4.3 |
4.2.3.4.3.2 | In-service values of wheelset equivalent conicity | 1.1.2 | 1.2 | | | 2.4.3 |
4.2.3.5.1 | Structural design of bogie frame |
1.1.1
1.1.2
4.2.3.5.2.1 | Mechanical and geometrical characteristics of wheelsets |
1.1.1
1.1.2
2.4.3 |
4.2.3.5.2.2 | Mechanical and geometrical characteristics of wheels |
1.1.1
1.1.2
4.2.3.5.3 | Automatic variable gauge systems |
1.1.1
1.1.2, 1.1.3
1.2 | | | 1.5 |
4.2.3.6 | Minimum curve radius |
1.1.1
1.1.2
2.4.3 |
4.2.3.7 | Life guards | 1.1.1 | | | | |
4.2.4.2.1 | Braking — Functional requirements |
1.1.1
2.4.1
2.4.2 | | | 1.5 |
4.2.4.2.2 | Braking — Safety requirements | 1.1.1 |
1.2
2.4.2
4.2.4.3 | Type of brake system | | | | |
2.4.3
2.3.2
4.2.4.4.1 | Emergency braking command | 2.4.1 | | | |
2.4.3
2.3.2
4.2.4.4.2 | Service braking command | | | | |
2.4.3
2.3.2
4.2.4.4.3 | Direct braking command | | | | | 2.4.3 |
4.2.4.4.4 | Dynamic braking command | 1.1.3 | | | | 2.3.2 |
4.2.4.4.5 | Parking braking command | | | | | 2.4.3 |
4.2.4.5.1 | Braking performance -General requirements |
1.1.1
2.4.1
2.4.2 | | | 1.5 |
4.2.4.5.2 | Emergency braking |
1.1.2
2.4.1
2.4.3
2.3.2
4.2.4.5.3 | Service braking | | | | |
2.4.3
2.3.2
4.2.4.5.4 | Calculations related to thermal capacity | 2.4.1 | | | | 2.4.3 |
4.2.4.5.5 | Parking brake | 2.4.1 | | | | 2.4.3 |
4.2.4.6.1 | Limit of wheel rail adhesion profile | 2.4.1 |
1.2
2.4.2
4.2.4.6.2 | Wheel slide protection system | 2.4.1 |
1.2
2.4.2
4.2.4.7 | Dynamic brake — Braking systems linked to traction system | 2.4.1 |
1.2
2.4.2
4.2.4.8.1. | Braking system independent of adhesion conditions – General | 2.4.1 |
1.2
2.4.2
4.2.4.8.2. | Magnetic track brake | | | | |
2.4.3
2.3.2
4.2.4.8.3 | Eddy current track brake | | | | |
2.4.3
2.3.2
4.2.4.9 | Brake state and fault indication | 1.1.1 |
1.2
2.4.2
4.2.4.10 | Brake requirements for rescue purposes | | 2.4.2 | | | |
4.2.5.1 | Sanitary systems | | | | 1.4.1 | |
4.2.5.2 | Audible communication system | 2.4.1 | | | | |
4.2.5.3 | Passenger alarm | 2.4.1 | | | | |
4.2.5.4 | Communication devices for passengers | 2.4.1 | | | | |
4.2.5.5 | Exterior doors: access to and egress from Rolling stock | 2.4.1 | | | | 2.3.2 |
4.2.5.6 | Exterior doors: system construction |
1.1.3
2.4.1
4.2.5.7 | inter-unit doors | 1.1.5 | | | | |
4.2.5.8 | Internal air quality | | | 1.3.2 | | |
4.2.5.9 | body side windows | 1.1.5 | | | | |
4.2.6.1 | Environmental conditions | | 2.4.2 | | | |
4.2.6.2.1 | Slipstream effects on passengers on platform and on workers at track side | 1.1.1 | | 1.3.1 | | |
4.2.6.2.2 | Head pressure pulse | | | | | 2.4.3 |
4.2.6.2.3 | Maximum pressure variations in tunnels | | | | | 2.4.3 |
4.2.6.2.4 | Crosswind | 1.1.1 | | | | |
4.2.6.2.5 | Aerodynamic effect on ballasted track | 1.1.1 | | | | 2.4.3 |
4.2.7.1.1 | Head lights | | | | |
2.4.3
2.3.2
4.2.7.1.2 | Marker lights | 1.1.1 | | | | 2.4.3 |
4.2.7.1.3 | Tail lights | 1.1.1 | | | | 2.4.3 |
4.2.7.1.4 | Lamp controls | | | | | 2.4.3 |
4.2.7.2.1 | Horn – General | 1.1.1 | | | |
2.4.3
2.6.3
4.2.7.2.2 | Warning horn sound pressure levels | 1.1.1 | | 1.3.1 | | |
4.2.7.2.3 | Protection | | | | | 2.4.3 |
4.2.7.2.4 | Horn control | 1.1.1 | | | | 2.4.3 |
4.2.8.1 | Traction performance | | | | |
2.4.3
2.6.3
2.3.2
4.2.8.2
4.2.8.2.1 to 4.2.8.2.9
Power supply | | | | |
1.5
2.4.3
2.3.2
4.2.8.2.10 | Electrical protection of the train | 2.4.1 | | | | |
4.2.8.4 | Protection against electrical hazards | 2.4.1 | | | | |
4.2.9.1.1 | Driver's cab – General | — | — | — | — | — |
4.2.9.1.2 | Access and egress | 1.1.5 | | | | 2.4.3 |
4.2.9.1.3 | External visibility | 1.1.1 | | | |
2.4.3
2.3.2
4.2.9.1.4 | Interior layout | 1.1.5 | | | | |
4.2.9.1.5 | Driver's seat | | | 1.3.1 | | |
4.2.9.1.6 | Driver's desk- Ergonomics | 1.1.5 | | 1.3.1 | | 2.3.2 |
4.2.9.1.7 | Climate control and air quality | | | 1.3.1 | | |
4.2.9.1.8 | Internal lighting | | | | | 2.6.3 |
4.2.9.2.1 | Windscreen — Mechanical characteristics | 2.4.1 | | | | |
4.2.9.2.2 | Windscreen — Optical characteristics | | | | |
2.4.3
2.3.2
4.2.9.2.3 | Windscreen – Equipment | | | | | 2.4.3 |
4.2.9.3.1 | Driver’s activity control function | 1.1.1 | | | | 2.6.3 |
4.2.9.3.2 | Speed indication | 1.1.5 | | | | |
4.2.9.3.3 | Driver display unit and screens | 1.1.5 | | | | |
4.2.9.3.4 | Controls and indicators | 1.1.5 | | | | |
4.2.9.3.5 | Labelling | | | | | 2.6.3 |
4.2.9.3.6 | Radio remote control function by staff for shunting operation | 1.1.1 | | | | 2.3.2 |
4.2.9.3.7 | Derailment detection and prevention signal processing |
1.1.1
1.1.2
4.2.9.3.7a | On-board derailment detection and prevention function |
1.1.1
1.1.2
4.2.9.3.8 | Requirements for management of ETCS modes | 1.1.1 | | | |
1.5
2.3.2
4.2.9.3.9 | Traction status | | | | | 2.3.2 |
4.2.9.4 | On-board tools and portable equipment | 2.4.1 | | | |
2.4.3
2.6.3
4.2.9.5 | Storage facility for staff personal effects | — | — | — | — | — |
4.2.9.6 | Recording device | | | | |
2.4.4
2.3.2
4.2.10.2 | Fire safety – Measures to prevent fire | 1.1.4 | | 1.3.2 | 1.4.2 | |
4.2.10.3 | Measures to detect/control fire | 1.1.4 | | | | |
4.2.10.4 | Requirements related to emergency situations | 2.4.1 | | | | 2.3.2 |
4.2.10.5 | Requirements related to evacuation | 2.4.1 | | | | |
4.2.11.2 | Train exterior cleaning | | | | | 1.5 |
4.2.11.3 | Connection to toilet discharge system | | | | | 1.5 |
4.2.11.5 | Interface for water refilling | | | | | 1.5 |
4.2.11.6 | Special requirements for stabling of trains | | | | | 1.5 |
4.2.11.7 | Refuelling equipment | | | | | 1.5 |
4.2.11.8 | Train interior cleaning – power supply | | | | | 2.5.3 |
4.2.12.2 | General documentation | | | | | 1.5 |
4.2.12.3 | Documentation related to maintenance | 1.1.1 | | | |
2.5.1
2.5.2
2.6.1
2.6.2
4.2.12.4 | Operating documentation | 1.1.1 | | | |
2.4.2
2.6.1
2.6.2
4.2.12.5 | Lifting diagram and instructions | | | | | 2.5.3 |
4.2.12.6 | Rescue related descriptions | | 2.4.2 | | | 2.5.3 |
4.2.13 | Interface requirements with Automated Train Operation | | | | |
1.5
2.3.2
2.4.3
Some of the essential requirements classified as ‘general requirements’ or ‘requirements specific to each subsystem’ in Annex III to Directive (EU) 2016/797 that have an impact on the rolling stock subsystem are covered in a limited way by the scope of this TSI.