Art. 7 Commission Regulation (EU) No 1301/2014 of 18 November 2014 on the technical specificati…

‘EC’ certificate of verification

In forcesince 16 Jun 2019cited 1×
1.

An ‘EC’ certificate of verification for a subsystem that contains interoperability constituents which do not have an ‘EC’ declaration of conformity or suitability for use, may be issued during a transitional period ending on 31 May 2021, provided that the requirements laid down in point 6.3 of the Annex are met.

2.

The production, upgrade or renewal of the subsystem with use of the non-certified interoperability constituents shall be completed within the transitional period set out in paragraph 1, including its placing in service.

3.

During the transitional period set out in paragraph 1:

(a)

the reasons for non-certification of any interoperability constituents shall be properly identified by the notified body before granting the ‘EC’ certificate pursuant to Article 15 of Directive (EU) 2016/797;

(b)

the national safety authorities, pursuant to Article 16(2)(d) of Directive (EU) 2016/798 of the European Parliament and of the Council [Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (OJ L 138, 26.5.2016, p. 102).] , shall report on the use of non-certified interoperability constituents in the context of authorisation procedures in their annual report referred to in Article 19 of Directive (EU) 2016/798.

4.

From 1 January 2016, newly produced interoperability constituents shall be covered by the EC declaration of conformity or suitability for use.