Art. 40 Directive (EU) 2014/68

Procedure for dealing with pressure equipment or assemblies presenting a risk at national level

In forcesince 15 May 2014cited 5×
1.

Where the market surveillance authorities of one Member State have sufficient reasons to believe that pressure equipment or assemblies covered by this Directive present a risk to the health or safety of persons or to domestic animals or property, they shall carry out an evaluation in relation to the pressure equipment or assembly concerned covering all relevant requirements laid down in this Directive. The relevant economic operators shall cooperate as necessary with the market surveillance authorities for that purpose.

Where, in the course of the evaluation referred to in the first subparagraph, the market surveillance authorities find that the equipment or assembly does not comply with the requirements laid down in this Directive, they shall without delay require the relevant economic operator to take all appropriate corrective actions to bring the pressure equipment or assembly into compliance with those requirements, to withdraw the equipment or assembly from the market, or to recall it within a reasonable period, commensurate with the nature of the risk, as they may prescribe.

The market surveillance authorities shall inform the relevant notified body accordingly.

Article 21 of Regulation (EC) No 765/2008 shall apply to the measures referred to in the second subparagraph of this paragraph.

2.

Where the market surveillance authorities consider that non-compliance is not restricted to their national territory, they shall inform the Commission and the other Member States of the results of the evaluation and of the actions which they have required the economic operator to take.

3.

The economic operator shall ensure that all appropriate corrective action is taken in respect of all the pressure equipment and assemblies concerned that it has made available on the market throughout the Union.

4.

Where the relevant economic operator does not take adequate corrective action within the period referred to in the second subparagraph of paragraph 1, the market surveillance authorities shall take all appropriate provisional measures to prohibit or restrict the equipment’s or assembly’s being made available on their national market, to withdraw the equipment or assembly from that market or to recall it.

The market surveillance authorities shall inform the Commission and the other Member States, without delay, of those measures.

5.

The information referred to in the second subparagraph of paragraph 4 shall include all available details, in particular the data necessary for the identification of the non-compliant equipment or assembly, the origin of the equipment or assembly, the nature of the non-compliance alleged and the risk involved, the nature and duration of the national measures taken and the arguments put forward by the relevant economic operator. In particular, the market surveillance authorities shall indicate whether the non-compliance is due to either of the following:

(a)

failure of the equipment or assembly to meet requirements relating to the health or safety of persons or to the protection of domestic animals or property; or

(b)

shortcomings in the harmonised standards referred to in Article 12 conferring a presumption of conformity.

6.

Member States other than the Member State initiating the procedure under this Article shall without delay inform the Commission and the other Member States of any measures adopted and of any additional information at their disposal relating to the non-compliance of the equipment or assembly concerned, and, in the event of disagreement with the adopted national measure, of their objections.

7.

Where, within three months of receipt of the information referred to in the second subparagraph of paragraph 4, no objection has been raised by either a Member State or the Commission in respect of a provisional measure taken by a Member State, that measure shall be deemed justified.

8.

Member States shall ensure that appropriate restrictive measures, such as withdrawal of the equipment or assembly from the market, are taken in respect of the equipment or assembly concerned without delay.

  • Vierzehnte Verordnung zum Produktsicherheitsgesetz19Law

    … darüber informiert, dass in einem anderen Mitgliedstaat der Europäischen Union eine vorläufige Maßnahme nach Artikel 40 Absatz 4 der Richtlinie 2014/68/EU in der Fassung vom 9. Oktober 2024 getroffen wurde, trifft die …

  • Judgment of the Court (Eighth Chamber) of 23 March 2023. Syndicat Uniclima v Ministre de l'Intérieur.Decision

    Furthermore, it is true that the safeguard procedure, laid down, in particular in Articles 40 and 41 of that directive, and relied on, in that context, by the French Government, allows Member States to adopt measures relating to equipment …

    23 Mar 2023 · 62021CJ0653

  • Conseil d'État, 9ème chambre, 17/03/2026, 504385, Inédit au recueil LebonDecision

    17 Mar 2026 · CETATEXT000053696107

  • Conseil d'État, 9ème chambre jugeant seule, 17 mars 2026, n° 504385, inédit au recueil LebonDecision

    D’autre part, aux termes de l’article 40 de la directive 2014/68/UE du Parlement européen et du Conseil du 15 mai 2014 relative à l’harmonisation des législations des États membres concernant la mise à disposition sur le marché …

    17 Mar 2026 · DCE_504385_20260317

  • Vierzehnte Verordnung zum Produktsicherheitsgesetz19Law