Recital 4, Commission Regulation (EU) No 1275/2013 of 6 December 2013 amending Annex I to Directive…

In force

Recently, a significant difference has been identified by the European Union Reference Laboratory for heavy metals in feed and food (EURL–HM) between the analytical results obtained by the application of different extraction methods currently used for the determination of lead in kaolinitic clay and feed containing kaolinitic clay [Determination of extractable and total lead in kaolinitic clay. Technical support from the EURL-HM to the Directorate-General for Health and Consumers – JRC 69122 – Joint Research Centre – Institute for Reference Materials and Measurements.]. Before, no significant differences were observed between the levels of heavy metals in mineral feed by the application of different extraction methods [IMEP-111: Total cadmium, lead, arsenic, mercury and copper and extractable cadmium and lead in mineral feed. Report of the eleventh interlaboratory comparison organised by the European Union Reference Laboratory for heavy metals in Feed and Food – EUR 24758 EN — Joint Research Centre – Institute for Reference Materials and Measurements.]. The maximum levels of heavy metals in feed relate ‘to an analytical determination of lead, whereby extraction is performed in nitric acid (5 % w/w) for 30 minutes at boiling temperature’. It is therefore appropriate to provide for the use of that method of extraction for the determination of lead in kaolinitic clay.