ANNEX II, Commission Implementing Regulation (EU) No 503/2013 of 3 April 2013 on applications for…

In forcesince 3 Apr 2013

For the purpose of this Annex, the following definitions shall apply:

1.

‘hazard identification’ means the identification of biological, chemical and physical agents capable of causing adverse health effects and which may be present in a particular food and feed or group of foods and feeds;

2.

‘hazard characterisation’ means the qualitative and/or quantitative evaluation of the nature of the adverse health effects associated with biological, chemical and physical agents which may be present in food and feed;

3.

‘risk characterisation’ means the qualitative and/or quantitative estimation, including attendant uncertainties, of the probability of occurrence and severity of known or potential adverse health effects in a given population based on hazard identification, hazard characterisation and exposure assessment.

In order to facilitate the risk assessment, the applicant shall endeavour to minimise the presence of inserted nucleic acid(s) sequences not essential to achieve the desired trait.

During the process of genetic modification of plants and other organisms, marker genes are often used to facilitate the selection and identification of genetically modified cells, containing the gene of interest inserted into the genome of the host organism, among the vast majority of untransformed cells. The applicant shall carefully select such marker genes and Article 4(2) of Directive 2001/18/EC shall be respected. Against that background, the applicant shall therefore aim to develop GMOs without the use of antibiotic resistance marker genes.

For the risk assessment of genetically modified food and feed containing stacked transformation events obtained by conventional crossing of genetically modified plants containing one or several transformation event(s), the applicant shall provide a risk assessment of each single transformation event or, in accordance with Article 3(6) of this Regulation, refer to already submitted application(s). The risk assessment of genetically modified food and feed containing stacked transformation events shall also include an assessment of the following aspects:

(a)

stability of the transformation events;

(b)

expression of the transformation events;

(c)

potential synergistic or antagonistic effects resulting from the combination of the transformation events shall be subject to an assessment in accordance with Sections 1.4 (Toxicology), 1.5 (Allergenicity) and 1.6 (Nutritional assessment).

For genetically modified food and feed containing, consisting of or produced from genetically modified plants, whose cultivation is associated with the production of genetically modified material containing various subcombinations of transformation events (segregating crops), the application shall include all subcombinations independently of their origin which have not yet been authorised. In such a case, the applicant shall provide a scientific rationale justifying that there is no need to provide experimental data for the concerned subcombinations or, in the absence of such scientific rationale, provide the experimental data.

For genetically modified food and feed containing, consisting of or produced from genetically modified plants, the cultivation of which does not lead to the production of genetically modified material containing various combinations of transformation events (non-segregating crops), the application shall only cover the combination which is to be placed on the market.

The rules set out in this Section apply mutatis mutandis to transformation events which are combined by other means such as co- and retransformation.

1.1.1. The applicant shall provide comprehensive information relating to the recipient or (where appropriate) the parental plants in order to:

(a)

evaluate all issues of potential concern, such as the presence of natural toxins or allergens;

(b)

identify the need for specific analyses.

1.1.2. For the purposes referred to in point 1.1.1, the applicant shall provide the following information:

(a)

Complete name:

(i)

family name;

(ii)

genus;

(iii)

species;

(iv)

subspecies;

(v)

cultivar/breeding line or strain;

(vi)

common name.

(b)

Geographical distribution and cultivation of the plant, including its distribution within the Union.

(c)

Information on the recipient or parental plants relevant to their safety, including any known toxicity or allergenicity.

(d)

Data on the past and present use of the recipient plant. This information shall include the history of safe use for consumption as food or feed, information on how the plant is typically cultivated, transported and stored, whether special processing is required to make the plant safe to eat, and describe the normal role of the plant in the diet (such as which part of the plant is used as a food or feed source, whether its consumption is important in particular subgroups of the population, what important macro- or micro-nutrients it contributes to the diet).

The applicant shall provide sufficient information on the genetic modification:

(a)

to identify the nucleic acid(s) intended for transformation and related vector sequences potentially delivered to the recipient plant;

(b)

to characterise the nucleic acid(s) actually inserted in the plant.

The applicant shall provide information on the following elements:

(a)

the method of genetic transformation including relevant references;

(b)

the recipient plant material;

(c)

the species and the strain of Agrobacterium and other microbes, if used during the genetic transformation process;

(d)

the helper plasmids, if used during the genetic transformation process;

(e)

the source of carrier nucleic acid(s), if used during the genetic transformation process.

The applicant shall provide the following information:

(a)

a physical map of the functional elements and other plasmid/vector components together with the relevant information needed for the interpretation of the molecular analyses (such as restriction sites, the position of primers used in polymerase chain reaction (PCR), the location of probes used in Southern analysis). The region intended for insertion shall be clearly indicated;

(b)

a table identifying each component of the plasmid/vector (including the region intended for insertion), its size, its origin and its intended function.

The applicant shall provide information on the donor organism(s) and on the nucleic acid(s) sequence(s) intended to be inserted in order to determine whether the nature of the donor organism(s) or the nucleic acid sequence(s) may trigger any safety issue.

Information regarding the function of the nucleic acid region(s) intended for insertion shall comprise the following elements:

(a)

the complete sequence of the nucleic acid(s) intended to be inserted, including information on any deliberate alteration(s) to the corresponding sequence(s) in the donor organism(s);

(b)

the history of safe use of the gene product(s) arising from the regions intended for insertion;

(c)

data on the possible relationship of the gene products with known toxins, anti-nutrients and allergens.

Information regarding each donor organism shall comprise:

taxonomic classification;

history of use regarding food and feed safety.

Information provided under this point may be limited to a general description of the introduced trait(s) and the resulting changes to the phenotype and metabolism of the plant.

For example, when the introduced trait is herbicide tolerance, the applicant shall provide information on the mode of action of the active substance and its metabolism in the plant.

The applicant shall provide the following information:

(a)

the size and copy number of all detectable inserts, both complete and partial; this is typically determined by Southern analysis.

Probe/restriction enzyme combinations used for this purpose shall provide complete coverage of sequences that could be inserted into the genetically modified plant, such as any parts of the plasmid/vector or any carrier or foreign nucleic acid(s) remaining in the genetically modified plant.

The Southern analysis shall span the entire transgenic locus(i) as well as flanking sequences and include all appropriate controls.

For the determination of copy number of the insert, complementary methods may also be used (such as real-time PCR);

(b)

the organisation and sequence of the inserted genetic material at each insertion site in a standardised electronic format, with the aim of identifying changes in the inserted sequences compared to the sequence intended for insertion;

(c)

in the case of deletion(s), size and function of the deleted region(s), whenever possible;

(d)

subcellular location(s) of insert(s) (nucleus, chloroplasts, mitochondria, or maintained in a non-integrated form) and methods for its/their determination;

(e)

sequence information in a standardised electronic format for both 5’ and 3’ flanking regions at each insertion site, with the aim of identifying interruptions of known genes.

Bioinformatic analyses shall be conducted using up-to-date databases with the aim of performing both intraspecies and interspecies similarity searches.

In the case of genetically modified plants containing stacked transformation events, the safety of potential interactions between any unintended modifications at each insertion site shall be assessed;

(f)

Open Reading Frames (hereafter referred to as ‘ORFs’ and defined as any nucleotide sequence that contains a string of codons that is uninterrupted by the presence of a stop codon in the same reading frame) created as a result of the genetic modification either at the junction sites with genomic DNA or due to internal rearrangements of the insert(s).

The ORFs shall be analysed between stop codons, not limiting their lengths. Bioinformatic analyses shall be conducted to investigate possible similarities with known toxins or allergens using up-to-date databases.

The characteristics and versions of the databases shall be provided.

Depending on the information gathered, further analyses (such as transcription analysis) may be needed to complete the risk assessment.

The applicant shall provide information:

to demonstrate whether the inserted/modified sequence results in intended changes at the protein, RNA and/or metabolite levels;

to characterise the potential unintended expression of new ORFs identified under point 1.2.2.2(f) as raising a safety concern.

For those purposes, the applicant shall provide the following information:

(a)

The method(s) used for expression analysis together with their performance characteristics;

(b)

Information on developmental expression of the insert during the life cycle of the plant.

The requirement for information on developmental expression shall be considered on a case-by-case basis taking into account the promoter used, the intended effect(s) of the modification and scope of the application;

(c)

Parts of the plant where the insert/modified sequences are expressed;

(d)

Potential unintended expression of new ORFs identified under point 1.2.2.2(f) which raise a safety concern;

(e)

Protein expression data, including the raw data, obtained from field trials and related to the conditions in which the crop is grown.

Data on expression levels from those parts of the plant used for food and feed purposes shall be provided in all cases.

In addition, information shall also be provided on the expression of target genes in other parts of the plant when tissue-specific promoters have been used and when this is relevant for the safety assessment. The minimum requirement for protein expression shall be data provided from three growing sites or from one site over three seasons. Permutations of the sites and seasons shall be acceptable provided that the minimum requirement is met. When justified by the nature of the insert (such as silencing approaches or where biochemical pathways have been intentionally modified), specific RNA(s) or metabolite(s) shall be analysed.

For silencing approaches by RNAi expression, potential ‘off target’ genes should be searched by in silico analysis to assess if the genetic modification could affect the expression of other genes which raise safety concerns;

(f)

With regard to the stacking of transformation events by conventional crossing, expression data shall be provided to assess the potential interactions between the events which may raise any additional safety concerns over protein and trait expression compared with the single transformation events. The comparison shall be carried out with data obtained from plants grown in the same field trials. On a case-by-case basis, and where concerns arise, additional information may be necessary.

The applicant shall provide information:

(a)

to demonstrate the genetic stability of the transgenic locus(i) and the phenotypic stability and inheritance pattern(s) of the introduced trait(s);

(b)

in case of stacked transformation events, to establish that each of the transformation events stacked in the plant has the same molecular properties and characteristics as in the plants with the single transformation events.

For the purposes of that information, applicants shall provide data which demonstrate stability over multiple (normally five) generations or vegetative cycles for plant containing single transformation events. Data from the first and the last generations of vegetative cycles are sufficient. The source of the material used for the analysis shall be specified. Data shall be analysed using appropriate statistical methods.

For stacked transformation events comparisons between the original transformation events and the stacked transformation events shall be carried out using plant materials representative of those designed for commercial production. The applicant shall provide adequate justification for the plant materials used. Comparisons shall include comparisons of sequences of the inserts and the flanking regions obtained from GM plants containing single events and plants containing stacked transformation events.

To assess genetic stability of the transformation event(s), applicants shall use appropriate molecular approaches referred to in Section 1.2.2.2.

The applicant shall assess the probability of horizontal gene transfer from the product to humans, animals and micro-organisms and any potential associated risk when intact and functional nucleic acid(s) remains in the genetically modified food and feed.

The molecular characterisation shall provide data on the structure and expression of the insert(s), and on the stability of the intended trait(s). This shall also apply to situations where transformation events have been stacked by conventional breeding.

It shall be specifically indicated whether the molecular characterisation of the genetic modification(s) raises safety concerns with regard to the interruption of endogenous genes or regulatory sequences.

The molecular characterisation shall also aim to identify whether the genetic modification(s) raise(s) any issues regarding the potential for producing proteins/substances other than those intended and in particular new toxins or allergens.

The potential unintended changes identified in this Section shall be addressed in the relevant complementary part(s) of the safety assessment.

The comparative analysis of composition and agronomic as well as phenotypic characteristics shall constitute, together with the molecular characterisation, the starting point to structure and conduct the risk assessment of a new genetically modified food and feed.

It shall aim at identifying similarities and differences:

(a)

in composition, agronomic performance and phenotypic characteristics (intended and unintended alterations) between the genetically modified plant and its conventional counterpart;

(b)

in composition between the genetically modified food and feed and its conventional counterpart.

Where no appropriate conventional counterpart can be identified, a comparative safety assessment cannot be made and consequently a safety and nutritional assessment of the genetically modified food or feed shall be carried out as for novel foods falling within the scope of Regulation (EC) No 258/97 of the European Parliament and of the Council [OJ L 43, 14.2.1997, p. 1.] that do not have conventional counterparts (such as where the genetically modified food or feed is not closely related to a food or feed with a history of safe use or where a specific trait or specific traits are introduced with the intention of bringing complex changes in the composition of the genetically modified food or feed).

In the case of vegetatively propagated crops, the conventional counterpart shall, in principle, be the near-isogenic variety used to generate the transgenic line.

In the case of crops that reproduce sexually, the conventional counterpart shall have a genetic background comparable to the genetically modified plant. When the GM plant has been developed using back-crossing, a conventional counterpart with a genetic background that is as close as possible to the genetically modified plant shall be selected.

In addition, the applicant may include a comparator having a closer genetic background to the genetically modified plant than the conventional counterpart (such as a negative segregant).

In the case of herbicide tolerant genetically modified plants and in order to assess whether the expected agricultural practices influence the expression of the studied endpoints, three test materials shall be compared: the genetically modified plant exposed to the intended herbicide; the conventional counterpart treated with conventional herbicide management regimes; and the genetically modified plant treated with the same conventional herbicide management regimes.

In the case of stacked transformation events, it is not always possible to use a conventional counterpart with a genetic background as close to the genetically modified plant as with conventional counterpart normally used for single transformation events. In such circumstances, the applicant shall provide reasoned justification on the choice of the conventional counterpart and assess its limitations for the risk assessment. In addition, single parental genetically modified lines or genetically modified lines containing a subcombination of the stacked transformation events for which an application has been submitted or negative segregants derived from these genetically modified lines may also be included as additional comparators. The applicant shall provide detailed information justifying the choice of additional comparators.

In all cases, the applicant shall provide information on the breeding scheme (pedigree) in relation to the genetically modified plant, the conventional counterpart and, where appropriate, additional comparators together with an adequate justification of their selection. The history of safe use of the conventional counterpart shall be adequately supported by both qualitative and quantitative data.

More detailed guidance for the application of the requirements of this Section is available in the EFSA scientific opinion ‘Guidance on selection of comparators for the risk assessment of genetically modified plants and derived food and feed’ [EFSA Journal 2011; 9(5):2149.].

Field trials used for the production of material for the comparative analysis shall be performed in order to determine whether the genetically modified plant and/or the genetically modified food and feed is different from its conventional counterpart and/or equivalent to non-genetically modified reference varieties with a history of safe use.

For each endpoint, the comparative analysis shall involve the following two approaches:

(i)

a test of difference, to verify whether the genetically modified plant is different from its conventional counterpart and might therefore be considered a hazard depending on the type of the identified difference, and on the magnitude and type of exposure;

(ii)

a test of equivalence to verify whether the genetically modified plant is equivalent or not to non-genetically modified reference varieties, apart from the introduced trait(s).

In testing for difference, the null hypothesis shall be that there is no difference between the GMO and its conventional counterpart against the alternative hypothesis that a difference exists.

Where additional comparator(s) are used for the risk assessment, a test of difference shall be carried out between the genetically modified plant and each of the additional comparator(s) following the requirements set out in Section 1.3.2.2 for the test of difference between the genetically modified plant and its conventional counterpart.

In testing for equivalence, the null hypothesis shall be that the difference between the GMO and the set of reference varieties is at least as great as a specified minimum size (see Section 1.3.2.2) against the alternative hypothesis that there is no difference or a smaller difference than the specified minimum between the GMO and the set of reference varieties.

Rejection of the null hypothesis shall be required in order to conclude that the GMO and the set of reference varieties are unambiguously equivalent for the endpoint considered. The equivalence limits used for the test of equivalence shall represent appropriately the range of natural variation expected for reference varieties with a history of safe use.

Natural variation may have several sources: variation within a variety arises due to environmental factors and variation between varieties arises due to a combination of both genetic and environmental factors. In order to identify and estimate differences attributable only to genotypes, it is essential to control environmental variability. Therefore, non-genetically modified reference varieties shall be included in the experimental design of the field trials and in sufficient numbers to ensure an adequate estimate of the variability required to set the equivalence limits. All test materials consisting of genetically modified plants, conventional counterpart, reference varieties and, where appropriate, additional comparator(s) shall be randomised to plots within a single field at each site, usually in a completely randomised or randomised block experimental design. The different sites selected for the field trials shall reflect the different meteorological and agronomic conditions under which the crop is to be grown; the choice shall be explicitly justified. The choice of non-genetically modified reference varieties shall be appropriate for the chosen sites and shall be justified explicitly. In the case the sites cover a restricted range of growing conditions, the applicant shall replicate the field trials over more than one year.

This article is long: the rest is at the official publication.