Art. 3 Commission Delegated Regulation (EU) No 305/2013 of 26 November 2012 supplementing Direc…

eCall PSAP requirements

In forcesince 2 May 2024cited 2×
1.

Member States shall ensure that any eCall PSAP is equipped to handle eCalls and receive the MSD originating from the in-vehicle equipment in accordance with the standard ‘Intelligent transport system – ESafety – PanEuropean eCall operating requirements’ (EN 16072:2022). If subsequent versions of that standard EN 16072 become applicable under Article 5(8) of Regulation (EU) 2015/758 [Regulation (EU) 2015/758 of the European Parliament and of the Council of 29 April 2015 concerning type-approval requirements for the deployment of the eCall in-vehicle system based on the 112 service and amending Directive 2007/46/EC(OJ L 123, 19.5.2015, p. 77).], those subsequent versions shall apply instead of EN 16072:2022.

Member States shall ensure that any eCall PSAP is equipped to handle eCalls and receive the MSD originating from the in-vehicle equipment in accordance with the standard ‘Intelligent transport systems – Esafety – ECall High Level Application Requirements (HLAP)’ (EN 16062:2023), as long as there are circuit-switched public mobile wireless communications networks in operation on their territory.

Member States shall ensure that any eCall PSAP is equipped to handle eCalls and receive the MSD originating from the in-vehicle equipment in accordance with the technical specification ‘Intelligent transport systems – eSafety – eCall High level application Protocols (HLAP) using IMS packet switched networks’ (CEN/TS 17184:2022). Where subsequent versions of that technical specification CEN/TS 17184 or a new equivalent standard EN 17184 become applicable under Article 5(8) of Regulation (EU) 2015/758, those subsequent versions or that new standard EN 17184, whichever is applicable, shall apply instead of CEN/TS 17184:2022.

2.

The eCall PSAP shall handle eCalls as expeditiously and effectively as any other call made to the single European emergency number 112. The eCall PSAP shall process eCalls in line with the requirements of national regulations for emergency call processing.

3.

The eCall PSAP shall be able to receive the data contents of the MSD and present them to the eCall PSAP operator clearly and understandably.

When the MSD contains optional additional data as defined in EN 15722:2020, the eCall PSAP shall be able to receive such optional additional data contents and present them to the eCall PSAP operator provided that such optional additional data is specified in accordance with published CEN eCall standards or technical specifications referred to in Regulation (EU) 2015/758.

When optional additional data referred to in the second subparagraph is specified in accordance with published CEN eCall standards or technical specifications not referred to in Regulation (EU) 2015/758, the eCall PSAP is encouraged to be able to receive these optional additional data contents and present them to the eCall PSAP operator in accordance with those standards or technical specifications.

4.

The eCall PSAP shall have access to an appropriate Geographical Information System (GIS) or an equivalent system allowing the eCall PSAP operator to identify the position and heading of the vehicle to a minimum degree of accuracy as defined in EN 15722:2020 for the MSD coordinates.

5.

The abovementioned requirements shall enable the eCall PSAP to provide location, type of eCall activation (manual or automatic) and other relevant data to the appropriate emergency service(s) or service partner(s).

6.

The eCall PSAP (initially receiving the eCall) shall establish audio communication with the vehicle and handle the eCall data; if necessary, the eCall PSAP may reroute the call and MSD data to another PSAP, emergency control centre or service partner according to national procedures determined by the national authority. Rerouting may be done via data or audio connection, or, preferably, both.

7.

When appropriate, and depending on national procedures and legislation, the eCall PSAP and appropriate emergency service(s) or service partner(s) may be granted access to the characteristics of the vehicle contained in national databases and/or other relevant resources, in order to obtain information that is necessary for dealing with an eCall, notably to allow the interpretation of the Vehicle Identification Number (VIN) and the presentation of additional relevant information, particularly vehicle type and model.

  • Decision_act (EU) 2014/5853Law

    … orgánů pro posuzování shody operací center tísňového volání služby eCall s požadavky uvedenými v článku 3 nařízení v přenesené pravomoci (EU) č. 305/2013, seznam a zeměpisné pokrytí center tísňového volání …

  • Regulation (EU) 2024/1084Lawamends